Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity; steady state

Defines a basis for reliability tests for passive optical components. It provides advice on life testing procedures, the calculation of failure rates and presentation of results. A worked example illustrates the method of calculating the instantaneous failure rate for a device during its service lifetime, based on accelerated life tests.

Zuverlässigkeit von LWL-Verbindungselementen und passiven Bauelementen - Teil 2: Quantitative Beurteilung der Zuverlässigkeit auf der Basis von beschleunigten Alterungsprüfungen - Temperatur und Feuchte; konstant

Fiabilité des dispositifs d'interconnexion et des composants passifs à fibres optiques - Partie 2: Evaluation quantitative de la fiabilité en fonction d'essais de viellissement accélérés - Température et humidité, régimes continus

Definit la base pour des essais de fiabilité des composants optiques passifs. Il fournit des conseils sur les procédures d'essai de durée de vie, les calculs des taux de défaillance et la présentation des résultats. Un exemple partique presente la méthode de caldul des taux de défaillance instantanée pour un dispositif au cours de sa durée de vie en service en fonction d'essais de durée de vie accélérée.

Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitative assessment of reliability based on accelerated ageing tests - Temperature and humidity, steady state (IEC 62005-2:2001)

General Information

Status
Published
Publication Date
26-Jun-2001
Withdrawal Date
30-Apr-2004
Current Stage
6060 - Document made available - Publishing
Start Date
27-Jun-2001
Completion Date
27-Jun-2001

Buy Standard

Standard
EN 62005-2:2002
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62005-2:2002
01-september-2002
Reliability of fibre optic interconnecting devices and passive components - Part 2:
Quantitative assessment of reliability based on accelerated ageing tests -
Temperature and humidity, steady state (IEC 62005-2:2001)
Reliability of fibre optic interconnecting devices and passive components -- Part 2:
Quantitative assessment of reliability based on accelerated ageing tests - Temperature
and humidity; steady state
Zuverlässigkeit von LWL-Verbindungselementen und passiven Bauelementen -- Teil 2:
Quantitative Beurteilung der Zuverlässigkeit auf der Basis von beschleunigten
Alterungsprüfungen - Temperatur und Feuchte; konstant
Fiabilité des dispositifs d'interconnexion et des composants passifs à fibres optiques --
Partie 2: Evaluation quantitative de la fiabilité en fonction d'essais de viellissement
accélérés - Température et humidité, régimes continus
Ta slovenski standard je istoveten z: EN 62005-2:2001
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 62005-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62005-2:2002

---------------------- Page: 2 ----------------------

SIST EN 62005-2:2002
EUROPEAN STANDARD EN 62005-2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2001
ICS 33.180.20
English version
Reliability of fibre optic interconnecting devices and passive components
Part 2: Quantitative assessment of reliability based on
accelerated ageing tests -
Temperature and humidity; steady state
(IEC 62005-2:2001)
Fiabilité des dispositifs d'interconnexion et Zuverlässigkeit von LWL-
des composants passifs à fibres optiques Verbindungselementen und passiven
Partie 2: Evaluation quantitative de la Bauelementen
fiabilité en fonction d'essais de Teil 2: Quantitative Beurteilung der
viellissement accélérés - Zuverlässigkeit auf der Basis von
Température et humidité, régimes beschleunigten Alterungsprüfungen -
continus Temperatur und Feuchte; konstant
(CEI 62005-2:2001) (IEC 62005-2:2001)
This European Standard was approved by CENELEC on 2001-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62005-2:2001 E

---------------------- Page: 3 ----------------------

SIST EN 62005-2:2002
EN 62005-2:2001 - 2 -
Foreword
The text of document 86B/1438/FDIS, future edition 1 of IEC 62005-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62005-2 on 2001-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-05-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62005-2:2001 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62005-2:2002
- 3 - EN 62005-2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.