EN 61086-2:2004

Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test

Gives the methods of test for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings), both as uncured and after application to specific boards. The major changes concern the addition of a new specimen A, new cleaning and test procedures and a new layout.

Beschichtungen für bestückte Leiterplatten (conformal coatings) - Teil 2: Prüfverfahren

Revêtements appliqués sur les cartes de câblage imprimées (revêtements enrobants) - Partie 2: Méthodes d'essai

Donne les méthodes d'essais des matériaux isolants électriques convenant à l'application comme revêtements appliqués sur les cartes de câblage imprimées (revêtements enrobants). Elle s'applique à la fois aux matériaux non polymérisés et aux matériaux appliqués sur des cartes spécifiques. Les principales modifications sont: l'ajout d'une nouvelle éprouvette A, de nouvelles procédures de nettoyage et d'essai ainsi qu'une nouvelle présentation.

Prevleke za z elementi opremljene plošče tiskanega vezja (standardne prevleke) - 2. del: Preskusne metode (IEC 61086-2:2004)

General Information

• Status: Published
• Publication Date: 21-Apr-2004
• Withdrawal Date: 31-Mar-2007
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Apr-2004
• Completion Date: 22-Apr-2004
• Ref Project: SIST EN 61086-2:2005 - Coatings for loaded printed wire boards (conformal coatings) -- Part 2: Methods of test

Relations

• Replaces: EN 61086-2:1994 - Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61086-2:2005

STANDARD
januar 2005
Prevleke za z elementi opremljene plošče tiskanega vezja (standardne
prevleke) - 2. del: Preskusne metode (IEC 61086-2:2004)
(istoveten EN 61086-2:2004)
Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of
test (IEC 61086-2:2004)
ICS 29.035.20; 31.180 Referenčna številka
SIST EN 61086-2:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61086-2
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2004

ICS 29.035.20 Supersedes EN 61086-2:1994


English version


Coatings for loaded printed wire boards
(conformal coatings)
Part 2: Methods of test
(IEC 61086-2:2004)


Revêtements appliqués  Beschichtungen für bestückte
sur les cartes de câblage imprimées Leiterplatten (conformal coatings)
(revêtements enrobants) Teil 2: Prüfverfahren
Partie 2: Méthodes d'essai (IEC 61086-2:2004)
(CEI 61086-2:2004)






This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61086-2:2004 E

---------------------- Page: 2 ----------------------

EN 61086-2:2004 - 2 -
Foreword
The text of document 15C/1546/FDIS, future edition 2 of IEC 61086-2, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61086-2 on 2004-04-01.
This European Standard supersedes EN 61086-2:1994.
This edition, which is presented in a new layout, includes the following significant technical changes
from EN 61086-2:1994:
a) a new specimen A has been added;
b) new cleaning and test procedures have been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61086-2:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61086-2:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068-2-10 1988 Environmental testing HD 323.2.10 S3 1988
Part 2: Tests - Test J and guidance:
Mould growth

IEC 60068-2-11 1981 Part 2: Tests - Test Ka: Salt mist EN 60068-2-11 1999

1)
IEC 60068-2-14 1984 Part 2: Tests - Test N: Change of EN 60068-2-14 1999
temperature

IEC 60068-2-39 1976 Part 2: Tests - Test Z/AMD: Combined EN 60068-2-39 1999
sequential cold, low air pressure and
damp heat test

IEC 60068-2-78 2001 Part 2-78: Tests - Test Cab: Damp heat, EN 60068-2-78 2001
steady state

IEC 60243-1 1998 Electrical strength of insulating materials - EN 60243-1 1998
Test methods
Part 1: Tests at power frequencies

2)
IEC 60249-1 1982 Base materia
...