EN 62246-1:2002
(Main)Reed contacts units - Part 1: Generic specification
Reed contacts units - Part 1: Generic specification
Is a generic specification applying to dry and mercury wetted reed contact units of assessed quality. Lists the tests and measurement procedures which may be selected for use in detail specifications for such units. Specifies the quality assessment procedures to be followed.
Reedkontakt-Einheiten - Teil 1: Fachgrundspezifikation
Contacts à lames souples en enceinte scellée - Partie 1: Spécification générique
Cette norme existe seulement en langue anglaise.
Reed contacts unit - Part 1: Generic specification
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 62246-1:2003
STANDARD
april 2003
Reed contacts unit - Part 1: Generic specification
ICS 29.120.70 Referenčna številka
SIST EN 62246-1:2003(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62246-1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 29.120.70 Supersedes EN 119000:1996
English version
Reed contacts unit
Part 1: Generic specification
(IEC 62246-1:2002)
Contacts à lames souples Reedkontakt-Einheiten
en enceinte scellée Teil 1: Fachgrundspezifikation
Partie 1: Spécification générique (IEC 62246-1:2002)
(CEI 62246-1:2002)
This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62246-1:2002 E
---------------------- Page: 2 ----------------------
EN 62246-1:2002 - 2 -
Foreword
The text of document 94/156/FDIS, future edition 1 of IEC 62246-1, prepared by IEC TC 94,
All-or-nothing electrical relays, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62246-1 on 2002-07-01.
This European Standard supersedes EN 119000:1996.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A, B and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62246-1:2002 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62246-1:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical HD 245 Series
technology
IEC 60050 Series International Electrotechnical --
Vocabulary (IEV)
IEC 60068-1 1988 Environmental testing
+ corr. October 1988 Part 1: General and guidance
+ A1 1992 EN 60068-1 1994
IEC 60068-2-1 1990 Part 2: Tests – Tests A: Cold EN 60068-2-1 1993
A1 1993 A1 1993
A2 1994 A2 1994
1)
IEC 60068-2-2 1974 Tests B: Dry heat EN 60068-2-2 1993
A1 1993 A1 1993
A2 1994 A2 1994
2)
IEC 60068-2-3 1969 Test Ca: Damp heat, steady state HD 323.2.3 S2 1987
IEC 60068-2-6 1995 Test Fc: Vibration (sinusoidal)
+ corr. March 1995 EN 60068-2-6 1995
IEC 60068-2-7 1983 Test Ga and guidance: Acceleration,
+ A1 1986 steady state EN 60068-2-7 1993
IEC 60068-2-11 1981 Test Ka: Salt mist EN 60068-2-11 1999
IEC 60068-2-13 1983 Test M: Low air pressure EN 60068-2-13 1999
IEC 60068-2-14 1984 Test N: Change of temperature
+ A1 1986 EN 60068-2-14 1999
IEC 60068-2-17 1994 Test Q: Sealing EN 60068-2-17 1994
1)
EN 60068-2-2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.