Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Gives the requirements for biaxially oriented polypropylene film having a smooth or rough surface, corona treated when required for vacuum metallization. The films are for use as dielectric in capacitors.

Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe - Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren

Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs

Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale - 1. list: Dvoosno orientirana polipropilenska folija za kondenzatorje

Podaja zahteve za dvoosno orientirano polipropilensko folijo z gladko ali grobo površino, koronsko obdelano, kadar je to potrebno za vakuumsko metalizacijo. Folije se uporabljajo kot dielektriki v kondenzatorjih.

General Information

Status
Withdrawn
Publication Date
17-Jan-2012
Withdrawal Date
17-Oct-2014
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
28-Oct-2011
Completion Date
28-Oct-2011

Relations

Buy Standard

Amendment
EN 60674-3-1:2001/A1:2012
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60674-3-1:2001/A1:2012
01-januar-2012

3ODVWLþQHIROLMH]DHOHNWULþQHQDPHQHGHO6SHFLILNDFLMH]DSRVDPH]QHPDWHULDOH

OLVW'YRRVQRRULHQWLUDQDSROLSURSLOHQVNDIROLMD]DNRQGHQ]DWRUMH

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet

1: Biaxially oriented polypropylene (PP) film for capacitors

Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe

- Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux

particuliers - Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs

Ta slovenski standard je istoveten z: EN 60674-3-1:1998/A1:2011
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60674-3-1:2001/A1:2012 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60674-3-1:2001/A1:2012
---------------------- Page: 2 ----------------------
SIST EN 60674-3-1:2001/A1:2012
EUROPEAN STANDARD
EN 60674-3-1/A1
NORME EUROPÉENNE
October 2011
EUROPÄISCHE NORM
ICS 29.035.20
English version
Plastic films for electrical purposes -
Part 3: Specifications for individual materials -
Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
(IEC 60674-3-1:1998/A1:2011)

Films plastiques à usages électriques - Isolierfolien für elektrotechnische Zwecke -

Partie 3: Spécifications pour matériaux Teil 3: Anforderungen für einzelne
particuliers - Werkstoffe -

Feuille 1: Films de polypropylène biorienté Blatt 1: Biaxial orientierte Polypropylen-

(PP) pour condensateurs (PP)-Folien für Kondensatoren
(CEI 60674-3-1:1998/A1:2011) (IEC 60674-3-1:1998/A1:2011)

This amendment A1 modifies the European Standard EN 60674-3-1:1998; it was approved by CENELEC on

2011-10-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language

made by translation under the responsibility of a CENELEC member into its own language and notified to the

CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60674-3-1:1998/A1:2011 E
---------------------- Page: 3 ----------------------
SIST EN 60674-3-1:2001/A1:2012
EN 60674-3-1:1998/A1:2011 - 2 -
Foreword

The text of document 15/596/CDV, future edition 1 of IEC 60674-3-1:1998/A1, prepared by IEC/TC 15,

"Solid electrical insulating materials", was submitted to the IEC-CENELEC parallel vote and approved by

CENELEC as EN 60674-3-1:1998/A1:2011.
The following dates are fixed:
(dop) 2012-07-18
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-10-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent

rights.
Endorsement notice

The text of the International Standard IEC 60674-3-1:1998/A1:2011 was approved by CENELEC as a

European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 60674-3-1:2001/A1:2012
- 3 - EN 60674-3-1:1998/A1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
Add the following reference:
Publication Year Title EN/HD Year
ISO 11357-3 - Plastics - Differential scanning calorimetry - -
(DSC) -
Part 3: Determination of temperature and
enthalpy
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.