EN 60870-6-503:2014

Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol

IEC 60870-6-503:2014 specifies a method of exchanging time-critical control centre data through wide-area and local-area networks using a full ISO compliant protocol stack. It contains provisions for supporting both centralized and distributed architectures. This standard includes the exchange of real-time data indications, control operations, time-series data, scheduling and accounting information, remote program control and event notification. This new edition includes the following significant technical changes with respect to the previous edition: - certain objects were made informative; - services associated with the informative objects were made informative; - certain TASE.2 conformance blocks were made out-of-scope.

Fernwirkeinrichtungen und -systeme - Teil 6-503: Fernwirkprotokolle, die mit ISO-Normen und ITU-T-Empfehlungen kompatibel sind - TASE.2-Dienste und -Protokoll

Matériels et systèmes de téléconduite - Partie 6-503: Protocoles de téléconduite compatibles avec les normes ISO et les recommandations de l'UIT-T - Services et protocole TASE.2

L'IEC 60870-6-503:2014 spécifie une méthode d'échange de données à contraintes temporelles fortes, entre centres de conduite, à travers des réseaux longues distances ou des réseaux locaux, en utilisant une pile de protocoles totalement conformes à l'ISO. Elle contient des dispositions qui satisfont à la fois des architectures centralisées ou des architectures distribuées. La présente norme inclut l'échange des indications de données en temps réel, des opérations de conduite, des données par ordre chronologique, des informations de programme ou comptables, des commandes à distance de programmes et des notifications de changement d'état. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - certains objets sont devenus informatifs; - les services associés aux objets informatifs sont devenus informatifs; - certains blocs de conformité ont été retirés du domaine d'application.

Oprema in sistemi za daljinsko vodenje - 6-503. del: Protokoli daljinskega vodenja, združljivi s standardi ISO in priporočili ITU-T - Storitve in protokol TASE.2 (IEC 60870-6-503:2014)

Ta del standarda IEC 60870 določa metodo izmenjavo časovno občutljivih podatkov nadzornega centra prek prostranih in lokalnih omrežij s celotnim skladom protokolov, skladnim s standardi ISO. Vsebuje ukrepe za podporo centraliziranih in razširjenih arhitektur. Ta standard vključuje izmenjavo indikatorjev podatkov v realnem času, nadzorne operacije, podatke o časovnem razporedu, informacije o časovnem načrtovanju in računovodske informacije, oddaljen nadzor programov in obveščanje o dogodkih.
Čeprav je osnovni cilj TASE.2 zagotavljanje izmenjave podatkov nazornega centra (daljinsko vodenje), njegova uporaba ni omejena na izmenjavo podatkov nadzornega centra. Lahko se uporablja na katerem koli področju s primerljivimi zahtevami. Takšni primeri so elektrarne, tovarniška avtomatizacija, avtomatizacija vodenja procesov itd.
Ta standard ne določa posameznih implementacij ali izdelkov ter ne omejuje implementacije entitet in vmesnikov v računalniškem sistemu. Ta standard določa zunanje vidno funkcijo implementacij skupaj z zahtevami glede skladnosti takšnih funkcij.

General Information

• Status: Published
• Publication Date: 02-Oct-2014
• Withdrawal Date: 18-Aug-2017
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: CLC/TC 57 - Power systems management and associated information exchange
• Drafting Committee: IEC/TC 57 - IEC_TC_57
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Oct-2014
• Completion Date: 03-Oct-2014
• Ref Project: SIST EN 60870-6-503:2014 - Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol

Relations

• Replaces: EN 60870-6-503:2002 - Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60870-6-503:2014
01-december-2014
1DGRPHãþD
SIST EN 60870-6-503:2004
2SUHPDLQVLVWHPL]DGDOMLQVNRYRGHQMHGHO3URWRNROLGDOMLQVNHJDYRGHQMD
]GUXåOMLYLVVWDQGDUGL,62LQSULSRURþLOL,7876WRULWYHLQSURWRNRO7$6(,(&

Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with
ISO standards and ITU-T recommendations - TASE.2 Services and protocol
Ta slovenski standard je istoveten z: EN 60870-6-503:2014
ICS:
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
SIST EN 60870-6-503:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60870-6-503:2014

---------------------- Page: 2 ----------------------

SIST EN 60870-6-503:2014


EUROPEAN STANDARD EN 60870-6-503

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 33.200 Supersedes EN 60870-6-503:2002
English Version
Telecontrol equipment and systems - Part 6-503: Telecontrol
protocols compatible with ISO standards and ITU-T
recommendations - TASE.2 Services and protocol
(IEC 60870-6-503:2014)
Matériels et systèmes de téléconduite - Partie 6-503: Fernwirkeinrichtungen und -systeme - Teil 6-503:
Protocoles de téléconduite compatibles avec les normes Fernwirkprotokolle, die mit ISO-Normen und ITU-T-
ISO et les recommandations de l'UIT-T - Services et Empfehlungen kompatibel sind - TASE.2-Dienste und -
protocole TASE.2 Protokoll
(CEI 60870-6-503:2014) (IEC 60870-6-503:2014)
This European Standard was approved by CENELEC on 2014-08-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60870-6-503:2014 E

---------------------- Page: 3 ----------------------

SIST EN 60870-6-503:2014
EN 60870-6-503:2014 - 2 -
Foreword
The text of document 57/1453/FDIS, future edition 3 of IEC 60870-6-503, prepared by IEC/TC 57
"Power systems management and associated information exchange" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 60870-6-503:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-05-19
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-08-19
the document have to be withdrawn

This document supersedes EN 60870-6-503:2002.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60870-6-503:2014 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60870-6-503:2014
- 3 - EN 60870-6-503:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on t
...