EN 62099:2001
(Main)Fibre optic wavelength switches - Generic specification
Fibre optic wavelength switches - Generic specification
Applies to fibre optic wavelength switches, which are: - passive optical devices, without optical amplification or opto-electronic conversion - restricted to the routing of light rather than intentional power division - have two or more ports with optical fibres or connectors. The standard establishes switch requirements and quality assessment procedures.
Lichtwellenleiter - Wellenlängenschalter - Fachgrundspezifikation
Commutateurs de longueur d'onde à fibres optiques - Spécification générique
S'applique aux commutateurs de longueur d'one à fibres optiques, qui sont: - des dispositifs passifs, sans l'amplification optique ni la conversion optoélectronique - réduite à l'acheminement de la lumière plutôt qu'à la division intentionnelle de pusssance - ont au moins deux portes avec des fibres optiques ou des connecteurs. La norme établit les exigences pour les commutateurs et les procédures d'assurance de la qualité.
Fibre optic wavelength switches - Generic specification (IEC 62099:2001)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fibre optic wavelength switches - Generic specification (IEC 62099:2001)Lichtwellenleiter - Wellenlängenschalter - FachgrundspezifikationCommutateurs de longueur d'onde à fibres optiques - Spécification génériqueFibre optic wavelength switches - Generic specification33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 62099:2001SIST EN 62099:2002en01-september-2002SIST EN 62099:2002SLOVENSKI
STANDARD
SIST EN 62099:2002
EUROPEAN STANDARDEN 62099NORME EUROPÉENNEEUROPÄISCHE NORMJuly 2001CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 62099:2001 EICS 33.180.20English versionFibre optic wavelength switches –Generic specification(IEC 62099:2001)Commutateurs de longueur d'ondeà fibres optiques –Spécification générique(CEI 62099:2001)Lichtwellenleiter - Wellenlängenschalter -Fachgrundspezifikation(IEC 62099:2001)This European Standard was approved by CENELEC on 2001-06-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 62099:2002
EN 62099:2001- 2 -ForewordThe text of document 86B/1454/FDIS, future edition 1 of IEC 62099, prepared by SC 86B, Fibre opticinterconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to theIEC-CENELEC parallel vote and was approved by CENELEC as EN 62099 on 2001-06-01.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2002-03-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2004-06-01Annexes designated "normative" are part of the body of the standard.In this standard, annex ZA is normative.Annex ZA has been added by CENELEC.__________Endorsement noticeThe text of the International Standard IEC 62099:2001 was approved by CENELEC as a EuropeanStandard without any modification.In the official version, for Bibliography, the following notes have to be added for the standardsindicated:IEC 60068 (series)NOTE: Harmonized as EN 60068 (series) (not modified).IEC 61300 (series)NOTE: Harmonized as EN 61300 (series) (not modified).IEC 61753 (series)NOTE: Harmonized as EN 61753 (series) (not modified).IEC 61754 (series)NOTE: Harmonized as EN 61754 (series) (not modified).IEC 62005 (series)NOTE: Harmonized as EN 62005 (series) (not modified).__________SIST EN 62099:2002
- 3 -EN 62099:2001Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60027SeriesLetter symbols to be used in electricaltechnology--IEC 60050-731- 1)International ElectrotechnicalVocabulary (IEV)Chapter 731: Optical fibrecommunication--IEC 60410- 1)Sampling plans and procedures forinspection by attributes--IEC 60617SeriesGraphical symbols for diagramsEN 60617SeriesIEC 60695-2-2- 1)Fire hazard testingPart 2: Test methods - Section 2:Needle-flame testEN 60695-2-21994 2)IEC 60825-1- 1)Safety of laser productsPart 1: Equipment classification,requirements and user's guideEN 60825-1+ corr. FebruaryA11+ corr. July1994 2)199519961997IEC 61748- 3)Manufacturing line
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.