EN 60603-8:1998

Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm

Applies to a group of related two-part connectors for printed boards for board-to-board and board-to-wire connection, with tin or gold plated contact area according to the style. The free or fixed board-mounted connectors are provided with terminations suitable for printed boards in accordance with IEC 60326 series and using a grid of 2.54 mm (0.1 in) as laid down in EN 60097.

Steckverbinder für gedruckte Schaltungen für Frequenzen unter 3 MHz - Teil 8: Indirekte Steckverbinder für gedruckte Schaltungen Rastermaß 2,54 mm (0,1 in) - Querschnitt der männlichen Kontakte 0,63 mm x 0,63 mm

Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 8: Connecteurs pour cartes imprimées en deux parties, pour grille de base de 2,54 mm (0,1 in) à contacts mâles de section 0,63 mm x 0,63 mm

S'applique à un groupe de connecteurs enfichables pour carte à carte et carte à fil, à zone de contact étamée ou dorée, selon le modèle. La fiche et l'embase montées sur les cartes sont munies de sorties adaptées aux cartes de câblages imprimés conformément à la série CEI 60326 et utilisant une grille de 2,54 mm (0,1 in) suivant la définition de la EN 60097.

Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm (IEC 60603-8:1990)

General Information

• Status: Published
• Publication Date: 24-Feb-1998
• Withdrawal Date: 30-Nov-1998
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Feb-1998
• Completion Date: 25-Feb-1998
• Ref Project: SIST EN 60603-8:2002 - Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60603-8:2002
01-september-2002
Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-
part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square
male contacts of 0,63 mm x 0,63 mm (IEC 60603-8:1990)
Connectors for frequencies below 3 MHz for use with printed boards -- Part 8: Two-part
connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male
contacts of 0,63 mm x 0,63 mm
Steckverbinder für gedruckte Schaltungen für Frequenzen unter 3 MHz -- Teil 8:
Indirekte Steckverbinder für gedruckte Schaltungen Rastermaß 2,54 mm (0,1 in) -
Querschnitt der männlichen Kontakte 0,63 mm x 0,63 mm
Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées
-- Partie 8: Connecteurs pour cartes imprimées en deux parties, pour grille de base de
2,54 mm (0,1 in) à contacts mâles de section 0,63 mm x 0,63 mm
Ta slovenski standard je istoveten z: EN 60603-8:1998
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60603-8:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60603-8:2002

---------------------- Page: 2 ----------------------

SIST EN 60603-8:2002

---------------------- Page: 3 ----------------------

SIST EN 60603-8:2002

---------------------- Page: 4 ----------------------

SIST EN 60603-8:2002

---------------------- Page: 5 ----------------------

SIST EN 60603-8:2002

---------------------- Page: 6 ----------------------

SIST EN 60603-8:2002
NORME CEI
INTERNATIONALE IEC
603-8
INTERNATIONAL
Première édition
First edition
STANDARD
1990-12
Connecteurs pour fréquences inférieures
à 3 MHz pour
utilisation avec cartes imprimées
Huitième partie:
en
Connecteurs pourcartes imprimées deux parties,
pour grille de base de 2,54mm (0,1 in)
à contacts mâles de section 0,63 mmx0,63 mm
Connectors for frequencies below 3 MHz
for use with printed boards
Part 8:
Two-part connectors for printed boards
for basic grid of 2,54 mm (0,1 in),
with square male contacts of 0,63 mmx0,63 mm
© CEI 1990 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans raccord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Inte rnationale 3, rue de Varembé Genève Suisse
Commission Electrotechnique Internationale CODE PRIX
V V
International Electrotechnical Commission PRICE CODE
IEC
McJKpyHapopHan 3neKTpoTexHH4ecHan HOMuccua
• Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60603-8:2002
603-8 © IEC — 3 —
CONTENTS
Page
FOREWORD 5
PREFACE 5
Clause
7
1. Scope
9
2. IEC type designation
11
3. Common features
4. Dimensions 22
45
5. Gauges and test board
49
6. Characteristics
57
7. Test schedule

---------------------- Page: 8 ----------------------

SIST EN 60603-8:2002
—5—
603-8 ©IEC
INTERNATIONAL ELECTROTECHNICAL COMMISSION
CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE
WITH PRINTED BOARDS
Part 8: Two-part connectors for printed boards
for basic grid of 2,54 mm (0,1 in),
with square male contacts of 0,63 mm x 0,63 mm
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the
1)
National Committees having a special interest therein are represented, express, as nearly as possible, an international consensus
of opinion on the subjects dealt with.
tional Committees in that sense.
2) They have the form of recommendations for international use and they are accepted by the Na
tional Committees should adopt the text of
3) In order to promote international unification, the IEC expresses the wish that all Na
tional rules in so far as national conditions will permit. Any divergence between the IEC
the IEC recommendation for their na
tter.
recommendation and the corresponding na tional rules should, as far as possible, be clearly indicated in the la
tion of approval and has no responsibility when an
4) The IEC has not laid down any procedure concerning marking as an indica
item of equipment is declared to comply with one of its recommendations.
PREFACE
This standard has been prepared by Sub-Committee 48B: Connectors, of IEC Technical Committee
No. 48: Electromechanical components for electronic equipment.
The text of this standard is based on the following documents:
Months' Rule Report on Voting
Six
48 B (CO) 164 48 B (CO) 179
rt
Full
...