EN IEC 62769-3:2023
(Main)Field Device Integration (FDI®) - Part 3: Server
Field Device Integration (FDI®) - Part 3: Server
IEC 62769-3:2023 is available as IEC 62769-3:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-3:2023 specifies the FDI®[1] Server. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure. Annex A provides a functional description of the FDI® Server. [1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
Feldgeräteintegration (FDI®) - Teil 3: FDI-Server
Intégration des appareils de terrain (FDI®) - Partie 3: Serveur
IEC 62769-3:2023 est disponible sous forme de IEC 62769-3:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62769-3:2023 spécifie le Serveur FDI®. L'architecture FDI® complète est représentée à la Figure 1. Les composants architecturaux qui relèvent du domaine d'application du présent document ont été mis en évidence dans cette figure. L'Annex A fournit une description fonctionnelle du Serveur FDI®. [1] FDI® est une marque déposée de l’organisation à but non lucratif Fieldbus Foundation, Inc. Cette information est donnée à l'intention des utilisateurs du présent document et ne signifie nullement que l'IEC approuve le détenteur de la marque ou l'emploi de ses produits. La conformité n'exige pas l'utilisation de la marque. L'utilisation de la marque exige l'autorisation du détenteur de la marque.
Integracija procesne naprave (FDI®) - 3. del: Strežnik (IEC 62769-3:2023)
Ta del standarda IEC 62769 določa strežnik FDI® 1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Integracija procesne naprave (FDI®) - 3. del: Strežnik (IEC 62769-3:2023)
Field Device Integration (FDI®) - Part 3: Server (IEC 62769-3:2023)
Feldgeräteintegration (FDI®) - Teil 3: FDI-Server (IEC 62769-3:2023)
Intégration des appareils de terrain (FDI®) - Partie 3: Serveur (IEC 62769-3:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-3:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62769-3
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 25.040.40; 35.100.05 Supersedes EN IEC 62769-3:2021
English Version
Field Device Integration (FDI®) - Part 3: Server
(IEC 62769-3:2023)
Intégration des appareils de terrain (FDI®) - Partie 3: Feldgeräteintegration (FDI®) - Teil 3: FDI-Server
Serveur (IEC 62769-3:2023)
(IEC 62769-3:2023)
This European Standard was approved by CENELEC on 2023-05-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-3:2023 E
European foreword
The text of document 65E/856/CDV, future edition 3 of IEC 62769-3, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-09
document have to be withdrawn
This document supersedes EN IEC 62769-3:2021 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-3:2023 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61804-3 - Devices and integration in enterprise systems - EN IEC 61804-3 -
Function blocks (FB) for process control and
electronic device description language (EDDL)
- Part 3: EDDL syntax and semantics
IEC 61804-4 - Devices and integration in enterprise systems - EN IEC 61804-4 -
Function blocks (FB) for process control and
electronic device description language (EDDL)
- Part 4: EDD interpretation
IEC 61804-5 - Devices and intergration in enterprise systems EN IEC 61804-5 -
- Function blocks (FB) for process control and
electronic device description language (EDDL)
- Part 5: EDDL Builtin library
IEC 62541-4 - OPC Unified Architecture - Part 4: Services EN IEC 62541-4 -
IEC 62541-7 - OPC unified architecture - Part 7: Profiles EN IEC 62541-7 -
IEC 62769-1 - Field Device Integration (FDI®) - Part 1: - -
Overview
IEC 62769-2 - Field Device Integration (FDI®) - Part 2: Client - -
IEC 62769-4 - Field Device Integration (FDI®) - Part 4: FDI - -
Packages
IEC 62769-5 - Field Device Integration (FDI®) - Part 5: FDI - -
Information Model
IEC 62769-7 - Field Device Integration (FDI®) - Part 7: - -
Communication Devices
IEC 62769-3 ®
Edition 3.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device integration (FDI®) –
Part 3: Server
Intégration des appareils de terrain (FDI®) –
Partie 3: Serveur
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-6446-1
– 2 – IEC 62769-3:2023 © IEC 2023
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviated terms and acronyms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms and acronyms . 8
3.3 Conventions . 9
4 Overview . 9
5 Information Model . 9
5.1 General . 9
5.2 Online/Offline . 10
5.2.1 Overview . 10
5.2.2 Transfer to device . 10
5.2.3 Transfer from device . 11
5.2.4 Interactive Transfer to device . 11
5.3 Access privileges . 11
5.4 Private Parameters . 11
5.5 Locking . 12
5.6 EditContext . 13
5.6.1 Concept and usage model . 13
5.6.2 Services . 14
5.6.3 NodeIds . 14
5.6.4 Reading . 14
5.6.5 Writing . 15
5.6.6 Writing dominant and dependent Variables . 15
5.6.7 Actions (EDD METHODS) . 16
5.6.8 UIDs . 16
5.6.9 Synchronization . 17
5.7 Reading . 17
5.7.1 General . 17
5.7.2 Reading offline variables . 18
5.7.3 Reading online variables . 18
5.8 Writing . 19
5.8.1 General . 19
5.8.2 Write offline variables . 20
5.8.3 Writing online variables . 21
5.8.4 Writing to an EditContext . 22
5.9 Subscription . 23
5.9.1 General . 23
5.9.2 Subscription of offline variables . 24
5.9.3 Subscription of online variables . 25
5.10 Device topology . 26
5.10.1 General . 26
5.10.2 Connection Points . 26
5.10.3 Topology management . 27
5.10.4 Topology scanning . 30
5.10.5 Use of SCAN function . 31
IEC 62769-3:2023 © IEC 2023 – 3 –
5.10.6 Validation of defined topology . 31
5.11 User Interface Elements . 32
5.11.1 User Interface Descriptions. 32
5.11.2 User Interface Plug-ins . 33
5.12 Actions . 33
® ®
5.12.1 FDI Server – FDI Client interaction . 33
5.12.2 Action state machine . 36
5.12.3 Actions Proxies . 37
5.12.4 INTERACTIVE_TRANSFER_TO_DEVICE Action . 38
5.12.5 Actions, EDD Actions and Actions Proxies . 39
6 OPC UA services . 40
6.1 OPC UA profiles . 40
6.2 Service error information . 40
6.2.1 Overview . 40
6.2.2 OPC UA services and their response . 40
6.2.3 Mapping
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.