EN 61158-5-3:2014

Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements

IEC 61158-5-3:2014 defines the services provided to the FAL user at the boundary between the user and the application layer of the fieldbus reference model, and Systems Management at the boundary between the application layer and Systems Management of the fieldbus reference model. This standard specifies the structure and services of the IEC fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. The main changes are: Correction of spelling and improved formatting for a better reading.

Industrielle Kommunikationsnetze - Feldbusse - Teil 5-3: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 3-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-3: Définition des services de la couche application - Éléments de type 3

L'IEC 61158-5-3:2014 défini les services mis en place pour l'utilisateur de FAL, à la frontière entre l'utilisateur et la couche application du modèle de référence de bus de terrain; et la Gestion des systèmes, à la frontière entre la couche application et la Gestion des systèmes selon le modèle de référence de bus de terrain. La présente norme spécifie la structure et les services de la couche application de bus de terrain IEC, en conformité avec le modèle de référence de base de l'OSI (ISO/CEI 7498-1) et la structure de la couche application de l'OSI (ISO/CEI 9545). Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique. Cette édition inclut les modifications majeures suivantes: Correction de l'orthographe et de la formulation pour une meilleure lisibilité.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 5-3. del: Definicija opravil na aplikacijski ravni - Elementi tipa 3 (IEC 61158-5-3:2014)

Ta standard spada v skupino standardov, namenjenih spodbujanju medsebojne povezave sestavnih delov avtomatizacijskega sistema. Povezan je z drugimi standardi v sklopu, kakor je opredeljeno s »trinivojskim« referenčnim modelom procesnih vodil iz standarda IEC 61158-1. Ta poddel vsebuje material, specifičen za procesna vodila tipa 3. Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do
komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil obravnavati kot »okno med ustreznimi aplikacijami«.
Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 3. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavljajo različne vrste aplikacijskih nivojev procesnih vodil v smislu a) abstraktnih modelov za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil;
b) primitivnih dejanj in dogodkov opravila;
c) parametrov, povezanih z vsakim primitivnim dejanjem in dogodkom, ter obliko, ki jo prevzamejo; in
d) medsebojne povezave med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji.
Namen tega standarda je določiti opravila, ki se zagotavljajo za
a) uporabnika FAL na meji med uporabnikom in referenčnim modelom aplikacijskega nivoja procesnega vmesnika, in
b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanjem sistemov za referenčni model procesnega vodila.
Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil.
Čeprav ta opravila določajo način izdajanja in dostavljanja zahtev in odzivov z vidika aplikacij, ne zajemajo specifikacije v zvezi s tem, kako naj se nanje odzovejo aplikacije, ki te zahteve in odzive oddajajo. To pomeni, da vedenjski vidiki aplikacij niso opredeljeni; opredeljena je le definicija zahtev in odzivov, ki jih lahko pošiljajo/prejemajo. Tako se uporabnikom aplikacijskega nivoja procesnih vodil omogoči večja prilagodljivost pri standardizaciji takega vedenja objektov. Poleg teh opravil so v tem standardu opredeljena tudi nekatera podporna opravila, da se omogoči dostop do aplikacijskega nivoja procesnih vodil za nadzorovanje nekaterih vidikov njegovega delovanja.

General Information

• Status: Published
• Publication Date: 09-Oct-2014
• Withdrawal Date: 21-Sep-2017
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Oct-2014
• Completion Date: 10-Oct-2014
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-5-3:2015 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements (IEC 61158-5-3:2014)

Relations

• Replaces: EN 61158-5-3:2012 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
• Effective Date: 03-Sep-2014
• Parent: EN 61158-5-2:2014 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
• Effective Date: 07-Jun-2022
• Parent: EN 61158-5-2:2014 - Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements
• Effective Date: 24-Mar-2020

Overview

EN 61158-5-3:2014 / IEC 61158-5-3:2014 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements (published by CLC/CENELEC).
This standard defines the application layer services provided to the Fieldbus Application Layer (FAL) user and the interface to Systems Management for Type 3 fieldbus elements. It specifies the structure, service primitives and data types of the IEC fieldbus application layer in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition supersedes the 2010 edition (technical revision: spelling and formatting corrections).

Key topics and technical requirements

• Scope and conformance: Defines FAL user services and systems management interfaces; details conformance classes and permitted services by AREP role.
• Application Service Elements (ASEs): Structure and definitions of ASEs and the Type 3 element set used by implementers.
• Communication model specification: DP communication concepts, ASE usage, application processes and application relationships (publisher/subscriber and client/server patterns).
• Data types and ASE formats: Definition of ASE data types, simple/extended input and output formats and consistency rules.
• Access control and rights: Access-right tables and rules for reading, writing and managing application objects.
• Timing and synchronization: Isochronous DP cycle diagrams, PLL and buffer state machines, and timing relationships for deterministic process data.
• State machines and lifecycle: Function invocation states, memory load region diagrams, alarm treatment and system architecture models.
• Normative references: Cross-references to IEC 61158 family parts, IEC 61131-1, IEC 61784 and relevant ISO/IEC OSI standards.

Applications and users

This standard is essential for:

• Device manufacturers implementing fieldbus application-layer functionality for Type 3 fieldbus systems.
• Automation and control engineers designing deterministic industrial networks for process measurement and control.
• System integrators ensuring interoperability between controllers, field devices and systems management tools.
• Protocol stack developers and test labs building conformance test suites and validating application-layer behavior. Typical applications include process and factory automation where deterministic fieldbus communication, application-layer services and systems management are required.

Related standards

• IEC 61158 series (Parts 1, 3-3, 4-3, 5-10, 6-3, etc.)
• IEC 61131-1 (programmable controllers)
• IEC 61784 (fieldbus profiles)
• ISO/IEC 7498-1 and ISO/IEC 9545 (OSI model and application layer structure)

Keywords: industrial communication networks, fieldbus, application layer, EN 61158-5-3:2014, IEC 61158-5-3, Type 3 elements, FAL, ASE, DP communication, fieldbus application services.

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 61158-5-3:2012
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 5-3. del:
Definicija opravil na aplikacijski ravni - Elementi tipa 3 (IEC 61158-5-3:2014)
Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer
service definition - Type 3 elements (IEC 61158-5-3:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-3: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 3-Elemente (IEC 61158-5-3:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-3:
Définition des services de la couche application - Éléments de type 3 (CEI 61158-5-
3:2014)
Ta slovenski standard je istoveten z: EN 61158-5-3:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61158-5-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-3:2012
English Version
Industrial communication networks - Fieldbus specifications -
Part 5-3: Application layer service definition - Type 3 elements
(IEC 61158-5-3:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse -
bus de terrain - Partie 5-3: Définition des services de la Teil 5-3: Dienstfestlegungen des Application Layer
couche application - Éléments de type 3 (Anwendungsschicht) - Typ 3-Elemente
(CEI 61158-5-3:2014) (IEC 61158-5-3:2014)
This European Standard was approved by CENELEC on 2014-09-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-5-3:2014 E
Foreword
The text of document 65C/763/FDIS, future edition 3 of IEC 61158-5-3, prepared by
SC 65C “Industrial networks” of IEC/TC 65 “Industrial-process measurement, control and automation"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-3:2014.

The following dates are fixed:
(dop) 2015-06-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-09-22
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-3:2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.

Endorsement notice
The text of the International Standard IEC 61158-5-3:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

1)
(not modified).
IEC 61158-6-10:2014 NOTE Harmonized as EN 61158-6-10
IEC 61784-1:2014 NOTE Harmonized as EN 61784-1:2014 (not modified).
1)
IEC 61784-2:2014 NOTE Harmonized as EN 61784-2 (not modified).

1)
To be published.
- 3 - EN 61158-5-3:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 61131-1 -  Programmable controllers - EN 61131-1 -
Part 1: General information
IEC 61158-1 2014 Industrial communication networks - EN 61158-1 2014
Fieldbus specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
2)
IEC 61158-3-3 2014 Industrial communication networks - EN 61158-3-3 -
Fieldbus specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
2)
IEC 61158-4-3 2014 Industrial communication networks - EN 61158-4-3 -
Fieldbus specifications -
Part 4-3: Data-link layer protocol
specification - Type 3 elements
2)
IEC 61158-5-10 2014 Industrial communication networks - EN 61158-5-10 -
Fieldbus specifications -
Part 5-10: Application layer service
definition - Type 10 elements
2)
IEC 61158-6-3 2014 Industrial communication networks - EN 61158-6-3 -
Fieldbus specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements
ISO/IEC 7498-1 -  Information technology - Open Systems - -
Interconnection - Basic reference model:
The basic model
ISO/IEC 7498-3 -  Information technology - Open Systems - -
Interconnection - Basic reference model:
Naming and addressing
ISO/IEC 8822 -  Information technology - Open Systems - -
Interconnection - Presentation service
definition
2)
To be published.
Publication Year Title EN/HD Year

ISO/IEC 8824-1 -  Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 9545 -  Information technology - Open Systems - -
Interconnection - Application layer
structure
ISO/IEC 10731 -  Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
IEC 61158-5-3 ®
Edition 3.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –

Part 5-3: Application layer service definition – Type 3 elements

Réseaux de communication industriels – Spécifications des bus de terrain –

Partie 5-3: Définition des services de la couche application – Éléments de type 3

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1732-0

– 2 – IEC 61158-5-3:2014 © IEC 2014
CONTENTS
FOREWORD . 11
INTRODUCTION . 13
1 Scope . 14
1.1 General . 14
1.2 Specifications . 15
1.3 Conformance . 15
2 Normative references . 15
3 Terms, definitions, abbreviations, symbols and conventions . 16
3.1 Referenced terms and definitions . 16
3.2 Fieldbus Application Layer Type 3 – specific terms and definitions . 18
3.3 Abbreviations and symbols . 25
3.4 Conventions . 26
4 Concepts . 31
5 Data type ASE . 32
6 Communication model specification . 32
6.1 DP concepts . 32
6.2 ASEs . 51
6.3 Summary of FAL classes . 430
6.4 Permitted FAL services by AREP role . 431
6.5 Conformance classes . 435
6.6 Application characteristics . 436
Bibliography . 438

Figure 1 – Example of DP communication with a single controlling device . 34
Figure 2 – Example of DP communication with several controlling devices . 34
Figure 3 – Example of DP communication between field devices . 35
Figure 4 – DP-slave model (modular DP-slave) . 37
Figure 5 – DP-slave model (compact DP-slave) . 38
Figure 6 – Overview of application processes . 39
Figure 7 – DP-slave model (modular DP-slave) . 40
Figure 8 – Application Service Elements (ASEs) . 42
Figure 9 – Application Process with application Objects (APOs) . 43
Figure 10 – Access to a remote APO . 44
Figure 11 – Access to a remote APO for publisher/subscriber association . 45
Figure 12 – Example of one AR with two AREPs . 46
Figure 13 – Relation of a simple process data object to the real object . 52
Figure 14 – Relation of a combined process data object to the real objects . 54
Figure 15 – Sequence of an isochronous DP cycle with one DP-master (class 1) . 85
Figure 16 – Additional time relationships in a DP system operating in isochronous
mode . 86
Figure 17 – DP system with optimized isochronous DP cycle . 88
Figure 18 – Buffered synchronized isochronous mode at the DP-master (class 1) . 89

IEC 61158-5-3:2014 © IEC 2014 – 3 –
Figure 19 – Enhanced synchronized isochronous mode at the DP-master (class 1) . 90
Figure 20 – Input, output and PLL state machine interaction . 91
Figure 21 – PLL state diagram . 96
Figure 22 – OUTPUT state diagram . 100
Figure 23 – INPUT state diagram . 104
Figure 24 – Treatment of an alarm in the DP system . 137
Figure 25 – Load Region state diagram for erasable memory . 236
Figure 26 – Load region state diagram for non-erasable memory . 237
Figure 27 – Function invocation state diagram . 269
Figure 28 – System architecture . 283
Figure 29 – Assignment of communication relationship to application relationship . 290
Figure 30 – MS0 application relationship . 296
Figure 31 – Output buffer model of a DP-slave without sync functionality . 297
Figure 32 – Output buffer model of a DP-slave with sync functionality . 297
Figure 33 – Input buffer model of a DP-slave without freeze functionality . 298
Figure 34 – Input buffer model of a DP-slave with freeze functionality. 298
Figure 35 – MS1 application relationship . 299
Figure 36 – MS2 application relationship . 299
Figure 37 – Example of inter-network communication . 300
Figure 38 – Example without inter-network addressing. 301
Figure 39 – First example with inter-network addressing . 301
Figure 40 – Second example with inter-network addressing . 302
Figure 41 – MS3 application relationship . 304
Figure 42 – MM1 application relationship . 304
Figure 43 – MM2 application relationship . 305
Figure 44 – Cycle time of the DP system . 437

Table 1 – Requirements and features of fieldbus DP . 33
Table 2 – Status values of the service primitives . 50
Table 3 – Access Rights MS1 . 53
Table 4 – Access Rights MS2 . 53
Table 5 – Access Rights MS1 . 56
Table 6 – Access Rights MS2 . 56
Table 7 – SCL matching rules . 57
Table 8 – Read . 57
Table 9 – Write . 59
Table 10 – Data transport . 60
Table 11 – Format (simple input data description) . 64
Table 12 – Consistency (simple input data description) . 64
Table 13 – Format (simple output data). 66
Table 14 – Consistency (simple output data) . 66
Table 15 – Format (extended input data) . 67
Table 16 – Consistency (extended input data) . 68

– 4 – IEC 61158-5-3:2014 © IEC 2014
Table 17 – Format (extended output data) . 69
Table 18 – Consistency (extended output data) . 70
Table 19 – Set Input . 71
Table 20 – Read Input . 71
Table 21 – Get Input . 73
Table 22 – New Input . 74
Table 23 – Set Output . 75
Table 24 – Final . 76
Table 25 – Read Output . 76
Table 26 – Get Output . 77
Table 27 – Clear Flag . 77
Table 28 – New Flag . 78
Table 29 – New Output . 78
Table 30 – Clear Flag . 78
Table 31 – Global Control . 79
Table 32 – Clear Command . 79
Table 33 – Sync Command . 79
Table 34 – Freeze Command . 80
Table 35 – New publisher data . 80
Table 36 – Get publisher data . 81
Table 37 – New Flag . 81
Table 38 – SYNCH . 82
Table 39 – SYNCH Delayed . 82
Table 40 – DX Finished . 83
Table 41 – SYNCH Event . 83
Table 42 – Status . 83
Table 43 – Primitives issued by the AL to the PLL state machine . 92
Table 44 – Primitives issued by the user to the PLL state machine . 92
Table 45 – Allowed values of Status . 93
Table 46 – Primitives issued by the user to the input state machine . 93
Table 47 – Primitives issued by the user to the output state machine . 93
Table 48 – Primitives issued by the PLL to the output state machine . 93
Table 49 – Primitives issued by the output to the PLL state machine . 93
Table 50 – Primitives issued by the PLL to the input state machine . 94
Table 51 – Primitives issued by the output to the input state machine . 94
Table 52 – Primitives issued by the output state machine to the AL . 94
Table 53 – Primitives issued by the AL to the output state machine . 94
Table 54 – Primitives issued by the input state machine to the AL . 94
Table 55 – Primitives issued by the AL to the input state machine . 95
Table 56 – PLL state table . 97
Table 57 – OUTPUT state table . 101
Table 58 – INPUT state table . 105
Table 59 – Identifier status . 107

IEC 61158-5-3:2014 © IEC 2014 – 5 –
Table 60 – Channel type . 108
Table 61 – IO type . 109
Table 62 – Status type . 109
Table 63 – Status specifier . 110
Table 64 – Status specifier . 111
Table 65 – Module status . 111
Table 66 – Status specifier . 112
Table 67 – Link status . 112
Table 68 – Link error. 113
Table 69 – Set Slave Diag . 114
Table 70 – Ext Diag Flag . 115
Table 71 – Get Slave Diag . 117
Table 72 – Read Slave Diag . 126
Table 73 – New Slave Diag . 136
Table 74 – Alarm type . 138
Table 75 – Add Ack. 139
Table 76 – Alarm specifier . 139
Table 77 – Alarm notification . 140
Table 78 – Alarm Ack . 141
Table 79 – Prm data type . 146
Table 80 – Supported feature . 156
Table 81 – Supported profile feature . 156
Table 82 – Role . 157
Table 83 – Check user Prm . 159
Table 84 – Prm structure . 160
Table 85 – MS1 Command . 162
Table 86 – Check user Prm result . 164
Table 87 – Status values . 165
Table 88 – Check Ext user Prm. 166
Table 89 – Check Ext user Prm result . 169
Table 90 – Status values . 170
Table 91 – Check Cfg . 170
Table 92 – Check Cfg result . 171
Table 93 – Status values . 172
Table 94 – Set Cfg . 172
Table 95 – Get Cfg . 173
Table 96 – Set Slave Add . 174
Table 97 – Initiate . 175
Table 98 – Abort . 178
Table 99 – Instance . 178
Table 100 – MS0 init DP-slave . 179
Table 101 – MS1 init DP-slave . 179
Table 102 – MS2 init DP-slave . 180

– 6 – IEC 61158-5-3:2014 © IEC 2014
Table 103 – DP-slave started . 180
Table 104 – Alarm limit . 181
Table 105 – DP-slave stopped . 181
Table 106 – Reset DP-slave . 182
Table 107 – DP-slave fault . 182
Table 108 – Application ready DP-slave . 182
Table 109 – Start subscriber . 183
Table 110 – Stop subscriber . 183
Table 111 – Publisher active . 184
Table 112 – Status . 185
Table 113 – Init DP-master Cl1 . 185
Table 114 – DP-master Cl1 started . 186
Table 115 – Alarm limit . 187
Table 116 – DP-master Cl1 stopped . 187
Table 117 – Reset DP-master Cl1 . 187
Table 118 – DP-master Cl1 fault . 188
Table 119 – DP-master Cl1 reject . 188
Table 120 – Set mode DP-master Cl1 . 189
Table 121 – DP-master Cl1 mode changed . 190
Table 122 – Load bus Par DP-master Cl1 . 191
Table 123 – Mark DP-master Cl1 . 192
Table 124 – Abort DP-master Cl1 . 192
Table 125 – Read value DP-master Cl1 . 193
Table 126 – Delete SC DP-master Cl1 . 193
Table 127 – DP-master Cl1 event . 194
Table 128 – Init DP-master Cl2 . 195
Table 129 – Reset DP-master Cl2 . 196
Table 130 – DP-master Cl2 fault . 196
Table 131 – DP-master Cl2 reject . 196
Table 132 – DP-master Cl2 closed . 197
Table 133 – DP-master Cl2 event . 197
Table 134 – USIF state . 198
Table 135 – Data rate . 202
Table 136 – USIF state . 203
Table 137 – Isochronous mode . 203
Table 138 – Slave type . 206
Table 139 – Alarm mode . 207
Table 140 – Get Master Diag . 210
Table 141 – MDiag identifier . 210
Table 142 – Start Seq . 211
Table 143 – Area code (start seq) . 212
Table 144 – Download . 213
Table 145 – Upload. 214

IEC 61158-5-3:2014 © IEC 2014 – 7 –
Table 146 – End Seq . 215
Table 147 – Act Para Brct . 216
Table 148 – Area code (Act Para Brct) . 216
Table 149 – Act param . 217
Table 150 – Area code (Act param) . 218
Table 151 – Activate . 218
Table 152 – Access rights MS1 . 220
Table 153 – Access rights MS2 . 221
Table 154 – Load region state . 221
Table 155 – Initiate load . 223
Table 156 – Default values for the parameter Intersegment Request Timeout . 224
Table 157 – Push segment . 225
Table 158 – Pull segment . 227
Table 159 – Terminate load . 229
Table 160 – Primitives issued by the user to the Load Region state machine . 231
Table 161 – Primitives issued by the Load Region state machine to the user . 232
Table 162 – Primitives issued by the Function Invocation to the Load Region state
machine . 232
Table 163 – Primitives issued by the Load Region to the Function Invocation state
machine . 233
Table 164 – Load Region state definitions . 233
Table 165 – Load Region function table . 234
Table 166 – Load Region state table for erasable memory . 237
Table 167 – Load Region state table for non-erasable memory . 249
Table 168 – Access rights MS1 . 254
Table 169 – Access rights MS2 . 254
Table 170 – Function Invocation state . 255
Table 171 – Load Region object in use . 255
Table 172 – Access rights MS1 . 256
Table 173 – Access rights MS2 . 257
Table 174 – Load Region object in use . 257
Table 175 – Start . 258
Table 176 – Stop . 259
Table 177 – Resume . 260
Table 178 – Reset . 261
Table 179 – Get FI state . 262
Table 180 – Call . 263
Table 181 – Primitives issued by the user to the Function Invocation state machine . 265
Table 182 – Primitives issued by the Function Invocation state machine to the user . 266
Table 183 – Primitives issued by the Load Region to the Function Invocation state
machine . 266
Table 184 – Primitives issued by the Function Invocation to the Load Region state
machine . 267
Table 185 – Function Invocation state definitions . 267

– 8 – IEC 61158-5-3:2014 © IEC 2014
Table 186 – Function definitions . 268
Table 187 – Function Invocation state table . 269
Table 188 – CS status . 285
Table 189 – Summertime . 285
Table 190 – Synchronization active. 286
Table 191 – Announcement hour . 286
Table 192 – Summertime . 287
Table 193 – Accuracy . 287
Table 194 – Set time . 288
Table 195 – Sync interval violation . 289
Table 196 – Parameter of Initiate service without inter-network addressing. 301
Table 197 – Parameter of Initiate service with inter-network addressing (first example) . 302
Table 198 – Parameter of Initiate service with inter-network addressing (second
example) . 303
Table 199 – AR type . 309
Table 200 – Sync supported . 310
Table 201 – Freeze supported . 311
Table 202 – Group identifier . 313
Table 203 – DPV1 enabled . 313
Table 204 – Fail safe . 314
Table 205 – WD Base . 314
Table 206 – No Add change . 316
Table 207 – Alarm mode supported . 319
Table 208 – Isochronous mode supp . 323
Table 209 – Isochronous mode . 323
Table 210 – Alarm mode . 324
Table 211 – Time device type . 325
Table 212 – S_SAP_
...