EN 60519-10:2005

Safety in electroheat installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications

Deals with safety requirements for electrical resistance trace heating systems in industrial and commercial applications. Pertains to trace heating systems that may comprise either factory fabricated or field (work-site) assembled units, and which may be series heater cables, parallel heater cables, heater pads or heater panels.

Sicherheit in Elektrowärmeanlagen - Teil 10: Besondere Anforderungen an elektrische Trace-Widerstandsheizungen für industrielle und gewerbliche Zwecke

Sécurité dans les installations électrothermiques - Partie 10: Règles particulières pour les systèmes de chauffage par traçage à résistance électrique pour applications industrielles et commerciales

Donne les exigences de sécurité pour les systèmes de chauffage par traçage à résistance électrique utilisés dans les applications industrielles et commerciales. Traite des systèmes de chauffage par traçage pouvant comprendre soit des unités fabriquées en usine soit des unités assemblées sur site et qui peuvent être des câbles chauffants en série, des câbles chauffants en parallèle, des rampes chauffantes ou des panneaux chauffants.

Varnost pri električnih grelnih inštalacijah – 10. del: Posebne zahteve za industrijske in komercialne sisteme za uporovno gretje (IEC 60519-10:2005)

General Information

• Status: Withdrawn
• Publication Date: 18-Sep-2005
• Withdrawal Date: 31-Jul-2008
• ICS: 25.180.10 - Electric furnaces
• Technical Committee: CLC/SR 27 - Industrial electroheating equipment
• Drafting Committee: IEC/TC 27 - IEC_TC_27
• Parallel Committee: IEC/TC 27 - IEC_TC_27
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Mar-2016
• Completion Date: 29-Mar-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60519-10:2005 - Safety in electroheat installations -- Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications

Relations

• Replaced By: EN 60519-10:2013 - Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SIST EN 60519-10:2005SLOVENSKIdecember 2005
STANDARDVarnost pri električnih grelnih inštalacijah – 10. del: Posebne zahteve za industrijske in komercialne sisteme za uporovno gretje (IEC 60519-10:2005)Safety in electroheat installations – Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (IEC 60519-10:2005)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60519-10:2005(en)ICS25.180.10







EUROPEAN STANDARD
EN 60519-10 NORME EUROPÉENNE EUROPÄISCHE NORM
September 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60519-10:2005 E
ICS 25.180.10
English version
Safety in electroheat installations Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications (IEC 60519-10:2005)
Sécurité dans les installations électrothermiques Partie 10: Règles particulières pour
les systèmes de chauffage par traçage
à résistance électrique pour applications industrielles et commerciales (CEI 60519-10:2005)
Sicherheit in Elektrowärmeanlagen Teil 10: Besondere Anforderungen an elektrische Trace-Widerstandsheizungen für industrielle und gewerbliche Zwecke (IEC 60519-10:2005)
This European Standard was approved by CENELEC on 2005-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 60519-10:2005 - 2 - Foreword The text of document 27/468/FDIS, future edition 1 of IEC 60519-10, prepared by IEC TC 27, Industrial electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60519-10 on 2005-08-01. This part of EN 60519 shall be used in conjunction with EN 60519-1:2003. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-08-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60519-10:2005 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 60519-10:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-841 - 1) International electrotechnical vocabulary Part 841: Industrial electroheat
- - IEC 60364-1 - 1) Electrical installations of buildings Part 1: Fundamental principles, assessment of general characteristics, definitions
- - IEC 60364-5-51 - 1) Part 5-51: Selection and erection of electrical equipment - Common rules
- - IEC 60446 - 1) Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals
EN 60446 1999 2) IEC 60519-1 2003 Safety in electroheat installations Part 1: General requirements EN 60519-1 2003
1) Undated reference. 2) Valid edition at date of issue.







NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 60519-10Première éditionFirst edition2005-07 Sécurité dans les installations
électrothermiques – Partie 10: Règles particulières pour les systèmes de chauffage par traçage à résistance électrique
...