High-voltage fuses - Part 2: Expulsion fuses

Specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1 000 V.

Hochspannungssicherungen - Teil 2: Austreibende Sicherungen

Fusibles à haute tension - Partie 2: Coupe-circuit à expulsion

Définit les conditions exigées pour les fusibles à expulsion, destinés à être utilisés à l'extérieur ou à l'intérieur sur des réseaux à courant alternatif 50 Hz et 60 Hz et dont les tensions assignées sont supérieures à 1 000 V.

High-voltage fuses - Part 2: Expulsion fuses (IEC 60282-2:1995)

General Information

Status

Withdrawn

Publication Date

07-Feb-1996

ICS

29.120.50 - Fuses and other overcurrent protection devices

Technical Committee

CLC/SR 32A - High-voltage fuses

Drafting Committee

IEC/SC 32A - IEC_SC_32A

Parallel Committee

IEC/SC 32A - IEC_SC_32A

Current Stage

9960 - Withdrawal effective - Withdrawal

Completion Date

25-Mar-2020

Ref Project

SIST HD 636 S1:1998 - High-voltage fuses -- Part 2: Expulsion fuses

Buy Standard

Standardization document

HD 636 S1:1998

English language

62 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 29 29.120 29.120.50

Standards Content (Sample)

HD 636 S1:1998

SLOVENSKI STANDARD
01-april-1998
High-voltage fuses - Part 2: Expulsion fuses (IEC 60282-2:1995)
High-voltage fuses -- Part 2: Expulsion fuses
Hochspannungssicherungen -- Teil 2: Austreibende Sicherungen
Fusibles à haute tension -- Partie 2: Coupe-circuit à expulsion
Ta slovenski standard je istoveten z: HD 636 S1:1996
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC

EN IEC 60282-1:2020(Main)

High-voltage fuses - Part 1: Current-limiting fuses

SIST EN IEC 60282-1:2020

IEC 60282-1:2020 applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. This eighth edition cancels and replaces the seventh edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition: – additional information concerning thermally operated strikers; – the division of ratings, characteristics and type tests into those applicable to all fuses and those applicable to particular fuse-link types and applications; – adjustment of Series II voltages and tests to meet present North American standard system voltages and applications; – clarification of requirements for fuse-links used in surrounding temperatures above 40 °C; and – clarification of homogeneous requirements for fuse-links containing one element.

Standard
82 pages
English language
sale 10% off
e-Library read for
1 day

28-May-2020
29.120.50
CLC/SR 32A

CLC

EN IEC 60282-4:2020(Main)

High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators

SIST EN IEC 60282-4:2020

IEC 60282-4:2020 applies to expulsion fuses complying with IEC 60282-2 and specifies additional testing requirements for fuses employing a cutout fuse-base that utilizes polymeric insulators.

Standard
19 pages
English language
sale 10% off
e-Library read for
1 day

28-May-2020
29.120.50
CLC/SR 32A

CLC

EN 60644:2009/A1:2019(Amendment)

Specification for high-voltage fuse-links for motor circuit applications

SIST EN 60644:2010/A1:2020

Amendment
6 pages
English language
sale 10% off
e-Library read for
1 day

21-Nov-2019
27-Oct-2022
29.120.50
CLC/SR 32A

CLC

EN 60549:2013(Main)

High-voltage fuses for the external protection of shunt capacitors

SIST EN 60549:2013

IEC 60549:2013 applies to external fuses used with high-voltage capacitors according to IEC 60871-1, Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General. IEC 60871-1 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems, and also to capacitors intended for use in power filter circuits. Fuses according to IEC 60549:2013 are intended to clear either faults inside a capacitor unit to permit continued operation of the remaining parts of the bank in which the unit is connected (unit fuses) or faults on the whole capacitor bank to isolate the bank from the system (line fuses). This second edition cancels and replaces the first edition published in 1976. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - alignment of the document with current IEC document structure requirements; - clarification of certain test requirements. Keywords: external fuses used with high-voltage capacitors, shunt capacitors for a.c.power system

Standard
19 pages
English language
sale 10% off
e-Library read for
1 day

13-Jun-2013
27-May-2016
29.120.50
CLC/SR 32A

CLC

EN 60644:2009(Main)

Specification for high-voltage fuse-links for motor circuit application

SIST EN 60644:2010

IEC 60644:2009 applies primarily to fuse-links used with motors started direct-on-line on alternating current systems of 50 Hz and 60 Hz. Standardizes time-current characteristics to formulate additional pulse withstand requirements regarding testing and to give guidance for the selection of fuse-links to be used with motors. Note: Fuse-links according to this specification should comply with the requirements of IEC 60282-1. The main changes with regard to the previous edition concern the following: - update of the normative references; - renewal of the figures.

Standard
15 pages
English language
sale 10% off
e-Library read for
1 day
Standard
15 pages
English language
sale 10% off
e-Library read for
1 day

01-Dec-2009
30-Sep-2012
29.120.50
CLC/SR 32A

CLC

EN IEC 60127-6:2024(Main)

Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

SIST EN IEC 60127-6:2025

IEC 60127-6:2023 is available as IEC 60127-6:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60127-6:2023 is applicable to fuse-holders for miniature cartridge fuse-links according to IEC 60127-2, sub-miniature fuse-links according to IEC 60127-3, universal modular fuse-links to IEC 60127-4 and miniature fuse-links for special applications to IEC 60127-7 for the protection of electric appliances, electronic equipment and component parts thereof, normally intended for use indoors. NOTE Requirements for fuse-holders for miniature fuse-links complying with IEC 60127-4 and IEC 60127-7 are under consideration. It does not apply to fuse holders for fuses completely covered by the subsequent parts of IEC 60269-1.

Draft
53 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60127-1:2024(Main)

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

SIST EN IEC 60127-1:2025

This part of IEC 60127 covers the general requirements and tests applicable to all types of miniature fuse-links (e.g. cartridge fuse-links, sub-miniature fuse-links, universal modular fuse-links and miniature fuse-links for special applications) for the protection of electric appliances, electronic equipment and component parts thereof normally intended to be used indoors. This standard does not apply to fuses intended for the protection of low-voltage electrical installations. These are covered by IEC 60269, Low Voltage Fuses. Specific details covering each major subdivision are given in subsequent parts. This standard does not apply to fuses for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. The object of this standard is a) to establish uniform requirements for miniature fuses so as to protect appliances or parts of appliances in the most suitable way, b) to define the performance of the fuses, so as to give guidance to designers of electrical appliances and electronic equipment and to ensure replacement of fuse-links by those of similar dimensions and characteristics, c) to define methods of testing, d) to define maximum sustained dissipation of fuse-links to ensure good compatibility of stated power acceptance when used with fuse-holders according to this standard (see IEC 60127-6).

Draft
40 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 62752:2024(Main)

In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles

SIST EN IEC 62752:2024

IEC 62752:2024 This International Standard applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as "IC-CPD", including control and safety functions. This document applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value. This second edition cancels and replaces the first edition published in 2016, and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Subclause 8.3.1 revised to add requirements for a mandatory control device that detects the temperature of the current carrying parts in the household plug; - Test requirements added in a new Subclause 9.36 for the temperature control device; - Harmonization of EMC requirements with new edition of IEC 61543 and IEC 61851-21-2; - General improvement of test and requirements.