EN IEC 60851-1:2021/FprA1:2024
(Amendment)Amendment 1 - Winding wires - Test methods - Part 1: General
Amendment 1 - Winding wires - Test methods - Part 1: General
Wickeldrähte - Prüfverfahren - Teil 1: Allgemeines
Amendement 1 - Fils de bobinage - Méthodes d'essai - Partie 1: Généralités
Navijalne žice - Preskusne metode - 1. del: Splošno - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60851-1:2021/oprA1:2024
01-september-2024
Navijalne žice - Preskusne metode - 1. del: Splošno - Dopolnilo A1
Amendment 1 - Winding wires - Test methods - Part 1: General
Wickeldrähte - Prüfverfahren - Teil 1: Allgemeines
Fils de bobinage - Méthodes d'essai - Partie 1: Généralités
Ta slovenski standard je istoveten z: EN IEC 60851-1:2021/prA1:2024
ICS:
29.060.10 Žice Wires
SIST EN IEC 60851-1:2021/oprA1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN IEC 60851-1:2021/oprA1:2024
SIST EN IEC 60851-1:2021/oprA1:2024
55/2045/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60851-1/AMD1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-06-14 2024-09-06
SUPERSEDES DOCUMENTS:
55/2044/RR
IEC TC 55 : WINDING WIRES
SECRETARIAT: SECRETARY:
United States of America Mr Mike Leibowitz
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 2,TC 14
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 1 - Winding wires - Test methods - Part 1: General
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
This CDV proposes updates to Annex A to update the alignment with the tables of contents of IEC 60851-2 through
60851-6.
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in
writing from IEC.
SIST EN IEC 60851-1:2021/oprA1:2024
55/2045/CDV – 2 – IEC CDV 60851-1:2021/AMD1
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WINDING WIRES – TEST METHODS –
Part 1: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60317-82:2020 has been prepared by IEC technical committee 55:
Winding wires.
The text of this Amendment is based on the following documents:
Draft Report on voting
55/XX/XXXX 55/XX/XXX
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.
SIST EN IEC 60851-1:2021/oprA1:2024
IEC CDV 60851-1:2021/AMD1 – 3 – 55/2045/CDV
© IEC:2024
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
Annex A is for information only.
A list of all parts in the IEC 60851 series, published under the general title Winding wires – Test
methods, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
___________
-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.