EN 50598-1:2014

Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM)

This European Standard provides a general methodology to energy efficiency standardization for any extended product including a motor system by using the methodological guidance of the extended product approach (EPA). It enables product committees for driven equipment with included motor systems to interact with the relative power losses of the included motor system (e.g. PDS) in order to determine the system energy efficiency aspects for the extended product by calculation. This should be based on specified calculation models for speed/load profiles, the load-time profiles and relative power losses of appropriate torque versus speed operating points. This part of the EN 50598 series specifies the methodology of determination of losses of the extended product including a motor system and its sub-parts. This framework is explained by an example for pumps. This part of the standard does not specify requirements for environmental impact declarations.

Ökodesign für Antriebssysteme, Motorstarter, Leistungselektronik und deren angetriebene Einrichtungen - Teil 1: Allgemeine Anforderungen zur Erstellung von Normen zur Energieeffizienz von Ausrüstungen mit Elektroantrieb nach dem erweiterten Produktansatz (EPA) mit semi-analytischen Modellen (SAM)

Dieser Teil von EN 50598 enthält eine allgemeine Vorgehensweise nach dem erweiterten Produktansatz EPA für die Normungsarbeit zum Thema Energieeffizienz für elektrisch angetriebene Teilanlagen. Produktkomitees, die sich damit befassen, erhalten die Möglichkeit, die relativen Verlustleistungen des eingebauten elektrischen Motorsystems (z. B. PDS) mit der davon angetriebenen Teilanlage jeder Art zu verknüpfen, um deren insgesamte System-Energieeffizienz zu bestimmen. Die Grundlage dafür sind festgelegte Berechnungsmodelle für Drehzahl/Last-Profile, die zeitlichen Belastungsprofile und relative Verlustleistungen des Antriebssystems in geeigneten Arbeitspunkten unter-schiedlicher Drehmomente in Abhängigkeit von der Drehzahl. Dieser Teil von EN 50598 legt die Methodik für die Bestimmung der Verluste des erweiterten Produktes und seiner Bestandteile fest. Dieser Teil von EN 50598 legt keine Anforderungen an Umweltverträglichkeitserklärungen fest.

Ecoconception des entraînements électriques de puissance, des démarreurs de moteur, de l'électronique de puissance et de leurs applications entraînées - Partie 1: Exigences générales pour définir les normes d'efficacité énergétique d'un équipement entraîné via l'approche produit étendu (EPA) et par le modèle semi-analytique (SAM)

La présente Norme européenne propose une méthodologie générale pour la normalisation de l'efficacité énergétique des produits étendus intégrant des systèmes moteurs en utilisant les lignes directrices méthodologiques de l'approche produit étendu (EPA). Elle permet aux comités responsables de produits entraînés par des moteurs de déterminer les pertes relatives de puissance du système moteur intégré (ex.: PDS) afin de déterminer par calcul l’efficacité énergétique du produit étendu. Cela doit se baser sur les modèles de calcul spécifiés pour les profils de vitesse/charge, les profils de temps de charge et les pertes relatives de puissance aux points de fonctionnement couple/vitesse adéquats. La présente partie de la série EN 50598 spécifie la méthodologie pour déterminer les pertes du produit étendu intégrant un système moteur et de ses sous-parties. Ce cadre est illustré par un exemple de pompes. La présente partie de la norme ne spécifie pas les exigences pour les déclarations concernant les impacts environnementaux.

Okoljsko primerna zasnova motornih pogonskih sistemov, motornih zaganjalnikov, močnostne elektronike in njihove aplikacije, ki jih ti poganjajo - 1. del: Splošne zahteve za določitev standardov energijske učinkovitosti motorno gnane opreme z uporabo razširjenega proizvodnega pristopa (EPA) in polanalitičnega modela (SAM)

Ta del standarda EN 50598 določa splošne zahteve za standardizacijo energijske učinkovitosti za razširjene proizvode z uporabo smernic razširjenega proizvodnega pristopa (EPA).
Omogoča tehničnim odborom za opremo, gnano z vgrajenimi motornimi sistemi (ti. razširjeni proizvodi), povezavo z relativno izgubo energije vgrajenih motornih sistemov (npr. PDS) za izračun energijske učinkovitosti sistema za celotno aplikacijo.
Ta bo osnovan na določenih računskih modelih za hitrostne/nalagalne profile, dolžnostne profile in relativne izgube energije ustreznih navornih delovnih točkah napram hitrostnim delovnim točkam.
Ta del standarda EN 50598 navaja metodologijo za določanje izgub razširjenih proizvodov in njihovih poddelov.
Ta del ISO 50598 ne določa zahtev za deklaracije o okoljskih vplivih.

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2014
• Withdrawal Date: 16-Nov-2017
• ICS: 29.160.30 - Motors
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22G - IEC_SC_22G
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 07-Apr-2020
• Completion Date: 07-Apr-2020
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 640/2009 - Commission Regulation (EC) No 640/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for electric motors
• Mandate: M/470 - Mandate to CEN, CENELEC and ETSI for Standardisation in the field of electric motors
• Mandate: M/476 - Mandate to CEN, CENELEC and ETSI for standardisation in the field of variable speed drives and/or Power Drive System products
• Mandate: M/495 - Standardisation mandate to CEN, CENELEC and ETSI under Directive 2009/125/EC relating to harmonised standards in the field of Ecodesign
• Ref Project: SIST EN 50598-1:2015 - Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM)

Relations

• Replaced By: EN 61800-9-1:2017 - Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM)
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2015
2NROMVNRSULPHUQD]DVQRYDPRWRUQLKSRJRQVNLKVLVWHPRYPRWRUQLK
]DJDQMDOQLNRYPRþQRVWQHHOHNWURQLNHLQQMLKRYHDSOLNDFLMHNLMLKWLSRJDQMDMR
GHO6SORãQH]DKWHYH]DGRORþLWHYVWDQGDUGRYHQHUJLMVNHXþLQNRYLWRVWLPRWRUQR
JQDQHRSUHPH]XSRUDERUD]ãLUMHQHJDSURL]YRGQHJDSULVWRSD(3$LQ
SRODQDOLWLþQHJDPRGHOD6$0
Ecodesign for power drive systems, motor starters, power electronics & their driven
applications - Part 1: General requirements for setting energy efficiency standards for
power driven equipment using the extended product approach (EPA), and semi analytic
model (SAM)
Ökodesign für Antriebssysteme, Motorstarter, Leistungselektronik und deren
angetriebene Einrichtungen -- Teil 1: Allgemeine Anforderungen für die Erstellung von
Normen zur Energieeffizienz von Ausrüstungen mit Elektroantrieb nach dem erweiterten
Produktansatz (EPA) und semi-analytischen Modellen (SAM)
Ecoconception des entraînements électriques de puissance, des démarreurs de moteur,
de l'électronique de puissance et de leurs applications entraînées -- Partie 1: Exigences
générales pour définir les normes d'efficacité énergétique d'un équipement entraîné via
l'approche produit étendu (EPA) et par le modèle semi-analytique (SAM)
Ta slovenski standard je istoveten z: EN 50598-1:2014
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50598-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 29.160.30
English Version
Ecodesign for power drive systems, motor starters, power
electronics & their driven applications - Part 1: General
requirements for setting energy efficiency standards for power
driven equipment using the extended product approach (EPA),
and semi analytic model (SAM)
Ecoconception des entraînements électriques de Ökodesign für Antriebssysteme, Motorstarter,
puissance, des démarreurs de moteur, de l'électronique de Leistungselektronik und deren angetriebene Einrichtungen -
puissance et de leurs applications entraînées - Partie 1: Teil 1: Allgemeine Anforderungen zur Erstellung von
Exigences générales pour définir les normes d'efficacité Normen zur Energieeffizienz von Ausrüstungen mit
énergétique d'un équipement entraîné via l'approche Elektroantrieb nach dem erweiterten Produktansatz (EPA)
produit étendu (EPA) et par le modèle semi-analytique mit semi-analytischen Modellen (SAM)
(SAM)
This European Standard was approved by CENELEC on 2014-11-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50598-1:2014 E
Contents Page
Foreword.3
1 Scope .6
2 Normative references .6
3 Terms, definitions, symbols, units and abbreviated terms .6
4 Requirements for the development of energy efficiency standards for extended products .9
4.1 General .9
4.2 Responsibility of the driven equipment technical committee . 10
4.3 Elements included in the extended product approach . 10
5 Requirements for the semi analytical model (SAM) of the extended product . 11
5.1 General . 11
5.2 Torque/Power versus speed profiles . 12
5.3 Operating points over time . 13
6 Requirements for the semi analytical model (SAM) of the motor system . 14
6.1 General . 14
6.2 Speed versus torque loss points of a PDS and the associated power losses . 15
6.3 Requirements if the motor system contains no CDM . 15
7 Merging the semi analytical models (SAMs) to the extended product approach . 16
7.1 General . 16
7.2 Speed versus torque loss points of a motor system . 17
7.3 How to determine intermediate speed versus torque loss points of a motor system . 17
7.3.1 General . 17
7.3.2 Determination of intermediate relative losses for speed versus torque

operating points of a motor system . 17
7.3.3 Loss determination by maximum losses of neighboured loss points . 18
7.3.4 Loss determination by two-dimensional interpolation of losses of
neighboured loss points . 18
Annex A (informative) Example how to apply the SAM in the EPA for pump systems with a
required speed versus torque loss points using the PDS . 20
Annex B (informative)  General calculation of the energy consumption based on the duty
profile . 22
Annex C (informative) Illustration of the collaboration of different responsibilities in the
extended product approach. 23
Bibliography . 24

Foreword
This document (EN 50598-1:2014) has been prepared by CLC/TC 22X "Power electronics".
The following dates are fixed:

(dop) 2015-11-17
• latest date by which this document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-11-17
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
EN 50598, Ecodesign for power drive systems, motor starters, power electronics & their driven
applications, will consist of the following parts:
- Part 1: General requirements for setting energy efficiency standards for power driven equipment
using the extended product approach (EPA), and semi analytical model (SAM);
- Part 2: Energy efficiency indicators for power drive systems and motor starters;
- Part 3: Quantitative ecodesign approach through life cycle assessment including product category
rules and the content of environmental declarations.
The CLC/TC 22X/WG 06 is the enabled task force for dealing with the Mandate M/476 from European
Commission for the standardization in the field of variable speed drives and/or power drive system
products.
It has been set a close collaboration with several other technical committees (i.e. CLC/TC 2;
CLC/TC 17B) in order to provide a comprehensive standard for energy efficiency aspects and
ecodesign requirements together with a pilot stakeholder committee CEN/TC 197 from the customers
side.
Key points:
- Requirements on the content of semi analytical models for motor system driven equipment;
- Requirements how to use them in the extended product approach.
The content could be of interest for the following technical committees CLC/TC 59X, CLC/TC 111X,
CEN/TC 44, CEN/TC 113, CEN/TC 121, CEN/TC 123, CEN/TC 142, CEN/TC 143, CEN/TC 156,
CEN/TC 228, CEN/TC 232 and CEN/TC 299.
It is the intention of the working group that this document, once finalized as European standard series,
will be further processed to an international consensus in IEC and ISO.
Introduction
The Technical Committee CLC/TC 22X has circulated at 2010-03-31 the document
CLC/TC 22X/Sec0100/DC document including the mandate M/476 from European Commission for
standardization in the field of variable speed drives and/or power drive system products.
As the PDS contains converter driven motors, the requirements for measuring of the energy efficiency
of motors with non-sinusoidal supply is under the responsibility of CLC/TC2 covering the requirement
from Mandate M/470.
The document is based on the CENELEC technical board document referenced BT137/DG8058/INF
also reproducing this EC-mandate.
The CLC/TC 22X/WG 06 as being the standardization task force for dealing with this Mandate has
close collaboration with several other technical committees (i.e. CLC/TC 2; CLC/TC 17B).
Therefore CLC/TC 22X committee has been enabled responsible to clarify all relevant aspects in the
field of energy efficiency and ecodesign requirements for power electronics, switchgear, control gear,
and power drive systems and their industrial applications.
The sometimes controversial requirements are illustrated in Figure 1. The work has been agreed to
provide the reasonable target as a best compromise.
MMararkekett ssuurrvveeiillallabblele
((iinnddeeppeennddeenndd
TTechechnniicacallllyy
certifiable ))
ccoommpprreehheennssiivvee
RReasoeasonnababllee ttararggetet
MMananuuffacacttuurrerernneeuuttrraall
(N(Noo mmararkekettiinngg
mmessaessaggeses))
Figure 1 — Illustration of controversial requirements for the energy related product (ErP)
standardization
EN 50598 is developed under the CENELEC projects number 24602 to 24604 for compliance with
requirements from the horizontal mandate M/495.
Its three parts are together directly related to the mandates M/470 and M/476.
For the other mandates listed in Table 1, this standard could be applied if the future product standards
developed will make reference to it.
Table 1 — Mandates of the European Commission given to CEN, CENELEC and ETSI and how
they are contributed by these standard series parts
Mandates Part 1 Part 2 Part 3
M/470
 
Motors
M/476
 
PDS
M/495
  
Horizontal all
future
Applications
M/488
 
()
HVAC comfort
fans
M/498
 
()
Pumps
M/500
  ()
Compressors
1 Scope
This European Standard provides a general methodology to energy efficiency standardization for any
extended product including a motor system by using the methodological guidance of the extended
product approach (EPA).
It enables product committees for driven equipment with included motor systems to interact with the
relative power losses of the included motor system (e.g. PDS) in order to determine the system energy
efficiency aspects for the extended product by calculation.
This should be based on specified calculation models for speed/load profiles, the duty profiles and
relative power losses of appropriate torque versus speed operating points.
This part of the EN 50598 series specifies the methodology of determination of losses of the extended
product including a motor system and its sub-parts.
This framework is explained by an example for pumps.
This part of the standard does not specify requirements for environmental impact declarations.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 50598-2, Ecod
...