EN 60793-2-30:2015

Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres

IEC 60793-2-30:2015(E9 is applicable to sub-categories A3a, A3b, A3c, A3d, A3e, A3f and A3g. These fibres are used or can be incorporated in different information transmission equipment, other applications employing similar light transmitting techniques as well as fibre optic cables. Three types of requirements apply to these fibres: - general requirements, as defined in IEC 60793-2; - specific requirements common to the category A3 multimode fibres covered in this standard and which are given in Clause 3; - particular requirements applicable to the individual sub-categories or specific applications (e.g. automotive or industrial applications), which are defined in the normative sub-category annexes. This fourth edition cancels and replaces the third edition published in 2012 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - specified test specimen length and measurement details for core diameter and NAff measurements have been added; - two new sub-categories have been added; - NAth is replaced by Naff. Keywords: category A3 multimode fibres

Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A3

Fibres optiques - Partie 2-30: Spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A3

IEC 60793-2-30:2015 est applicable aux sous-catégories A3a, A3b, A3c, A3d, A3e, A3f et A3g. Ces fibres sont utilisées ou peuvent être intégrées dans différents équipements destinés à la transmission de l'information, d'autres applications employant des techniques de transmission lumineuse analogues, ainsi que les câbles à fibres optiques. Trois types d’exigences s’appliquent à ces fibres: - les exigences générales, conformément à l’IEC60793-2; - les exigences spécifiques communes aux fibres multimodes de catégorie A3, couvertes par la présente norme, et qui sont données à l'Article 3; - les exigences particulières applicables à des sous-catégories particulières ou à des applications spécifiques (par exemple, des applications automobiles ou industrielles), qui sont définies dans les annexes normatives relatives aux sous-catégories. Cette quatrième édition annule et remplace la troisième édition parue en 2012 et constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - Ajouts de précisions relatives à la longueur du spécimen d'essai, au diamètre de cœur et aux mesurages NAff. - Ajout de deux nouvelles sous-catégories - NAth est remplacé par NAff

Optična vlakna - 2-30. del: Specifikacije izdelka - Področna specifikacija za večrodna vlakna kategorije A3 (IEC 60793-2-30:2015)

Ta del standarda IEC 60793-2 se uporablja za podkategorije A3a, A3b, A3c, A3d, A3e, A3f in A3g. Ta vlakna se uporabljajo ali jih je mogoče vgraditi v različne vrste opreme za prenos informacij, druge naprave, ki uporabljajo podobne tehnike prenosa svetlobe, in optične kable.
Za ta vlakna veljajo tri vrste zahtev:
• splošne zahteve, kot so opredeljene v standardu IEC 60793-2;
• posebne zahteve, ki so skupne večrodnim vlaknom kategorije A3 iz tega standarda in so navedene v točki 3;
• posebne zahteve, ki veljajo za posamezne podkategorije ali posebne vrste uporabe (npr. avtomobilska ali industrijska uporaba) in so opredeljene v normativnih dodatkih o podkategorijah.

General Information

• Status: Published
• Publication Date: 15-Oct-2015
• Withdrawal Date: 29-Jul-2018
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 16-Oct-2015
• Completion Date: 16-Oct-2015
• Ref Project: SIST EN 60793-2-30:2016 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2015)

Relations

• Replaces: EN 60793-2-30:2013 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
• Effective Date: 26-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60793-2-30:2016
01-april-2016
1DGRPHãþD
SIST EN 60793-2-30:2013
2SWLþQDYODNQDGHO6SHFLILNDFLMHL]GHOND3RGURþQDVSHFLILNDFLMD]D
YHþURGQDYODNQDNDWHJRULMH$,(&
Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3
multimode fibres (IEC 60793-2-30:2015)
Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation für
Mehrmodenfasern der Kategorie A3 (IEC 60793-2-30:2015)
Fibres optiques - Partie 2-30: Spécifications de produits - Spécification intermédiaire
pour les fibres multimodales de catégorie A3 (IEC 60793-2-30:2015)
Ta slovenski standard je istoveten z: EN 60793-2-30:2015
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60793-2-30:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60793-2-30:2016

---------------------- Page: 2 ----------------------

SIST EN 60793-2-30:2016


EUROPEAN STANDARD EN 60793-2-30

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2015
ICS 33.180.10 Supersedes EN 60793-2-30:2013
English Version
Optical fibres - Part 2-30: Product specifications - Sectional
specification for category A3 multimode fibres
(IEC 60793-2-30:2015)
Fibres optiques - Partie 2-30: Spécifications de produits - Lichtwellenleiter - Teil 2-30: Produktspezifikationen -
Spécification intermédiaire pour les fibres multimodales de Rahmenspezifikation für Mehrmodenfasern der Kategorie
catégorie A3 A3
(IEC 60793-2-30:2015) (IEC 60793-2-30:2015)
This European Standard was approved by CENELEC on 2015-07-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60793-2-30:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60793-2-30:2016
EN 60793-2-30:2015
European foreword
The text of document 86A/1661/FDIS, future edition 4 of IEC 60793-2-30, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60793-2-30:2015.

The following dates are fixed:
(dop) 2016-04-30
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-07-30
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60793-2-30:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60793-2-30:2015 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 60793-2-30:2016
EN 60793-2-30:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date
...