EN 62541-6:2015

OPC unified architecture - Part 6: Mappings

IEC 62541-6:2015 specifies the OPC Unified Architecture (OPC UA) mapping between the security model described in IEC TR 62541-2, the abstract service definitions, described in IEC 62541-4, the data structures defined in IEC 62541-5 and the physical network protocols that can be used to implement the OPC UA specification. This second edition cancels and replaces the first edition published in 2011 and constitutes a technical revision. This edition includes the following changes: - A new HTTPS transport has been defined; - Added an additional padding byte to handle asymmetric key sizes larger than 2048 bits. Fixed errors in SOAP action URIs; - Needed a standard way to serialize nodes in an address space. Added the UANodeSet schema defined in Annex F.

OPC Unified Architecture - Teil 6: Protokollabbildungen

Architecture unifiée OPC - Partie 6: Correspondances

L'IEC 62541-6:2015 spécifie les correspondances de l'architecture unifiée OPC (OPC UA) entre le modèle de sécurité décrit dans l'IEC TR 62541-2, les définitions de services abstraits décrites dans l'IEC 62541-4, les structures de données définies dans l'IEC 62541-5 et les protocoles de réseaux physiques qui peuvent être utilisés pour mettre en oeuvre la spécification OPC UA. Cette deuxième édition annule et remplace la première édition parue en 2011. Elle constitue une révision technique. Elle inclut les modifications suivantes: - Un nouveau protocole de transport HTTPS; - Ajout d'un octet de remplissage supplémentaire pour gérer les tailles des clés asymétriques de longueur supérieure à 2048 bits. Définition des erreurs fixes dans les URI d'action SOAP; - Ajout du schéma de l'Ensemble de Noeuds UA (UANodeSet) défini à l'Annexe F.

Enotna arhitektura OPC - 6. del: Načrtovanje (IEC 62541-6:2015)

Ta del standarda IEC 62541 določa načrtovanje enotne arhitekture OPC (OPC UA) med zaščitnim modelom iz standarda IEC TR 62541-2, definicijami abstraktnih storitev iz standarda IEC 62541-4, podatkovnimi strukturami iz standarda IEC 62541-5 in fizičnimi omrežnimi protokoli, ki jih je mogoče uporabiti za izvajanje specifikacije enotne arhitekture OPC.

General Information

• Status: Withdrawn
• Publication Date: 28-May-2015
• Withdrawal Date: 28-Apr-2018
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100 - Open systems interconnection (OSI)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Aug-2023
• Completion Date: 17-Aug-2023
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 62541-6:2015 - OPC Unified Architecture - Part 6: Mappings (IEC 62541-6:2015)

Relations

• Replaces: EN 62541-6:2011 - OPC unified architecture - Part 6: Mappings
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 62541-6:2020 - OPC Unified Architecture - Part 6: Mappings
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62541-6:2015
01-oktober-2015
1DGRPHãþD
SIST EN 62541-6:2012
(QRWQDDUKLWHNWXUD23&GHO1DþUWRYDQMH,(&
OPC Unified Architecture - Part 6: Mappings (IEC 62541-6:2015)
OPC unified architecture - Part 6: Mappings (IEC 62541-6:2015)
Architecture unifiée OPC - Partie 6: Correspondances (IEC 62541-6:2015)
Ta slovenski standard je istoveten z: EN 62541-6:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62541-6:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62541-6:2015

---------------------- Page: 2 ----------------------

SIST EN 62541-6:2015


EUROPEAN STANDARD EN 62541-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 25.040.40; 35.100 Supersedes EN 62541-6:2011
English Version
OPC unified architecture - Part 6: Mappings
(IEC 62541-6:2015)
Architecture unifiée OPC - Partie 6: Correspondances OPC Unified Architecture - Teil 6: Protokollabbildungen
(IEC 62541-6:2015) (IEC 62541-6:2015)
This European Standard was approved by CENELEC on 2015-04-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62541-6:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62541-6:2015
EN 62541-6:2015 - 2 -
Foreword
The text of document 65E/377/CDV, future edition 2 of IEC 62541-6, prepared by SC 65E "Devices
and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62541-6:2015.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-01-29
national level by publication of an identical national
standard or by endorsement
(dow) 2018-04-29
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 62541-6:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
Endorsement notice
The text of the International Standard IEC 62541-6:2015 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62541-6:2015
- 3 - EN 62541-6:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC/TR 62541-1 -  OPC
...