iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60300-3-3:2017

(Main)

Dependability management - Part 3-3: Application guide - Life cycle costing

Dependability management - Part 3-3: Application guide - Life cycle costing

Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the general approaches involved. Identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.

Zuverlässigkeitsmanagement - Teil 3-3: Anwendungsleitfaden - Lebenszykluskosten

Gestion de la sûreté de fonctionnement - Partie 3-3: Guide d'application - Évaluation du coût du cycle de vie

Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the general approaches involved. Identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.

Upravljanje zagotovljivosti - 3-3. del: Vodilo za uporabo - Izračun stroškov v življenjskem ciklu (IEC 60300-3-3:2017)

Podaja splošni uvod v koncept izračuna stroškov v življenjskem ciklu, zajema vse načine uporabe in posebej izpostavlja stroške, povezane z zanesljivostjo izdelka. Pojasnjuje namen in vrednost izračuna stroškov v življenjskem ciklu ter opisuje vključene splošne pristope. Določa tipične elemente stroškov v življenjskem ciklu za lažje načrtovanje projektov in programov. Podano je splošno vodilo za izvajanje analize stroškov v življenjskem ciklusu, vključno z razvojem modela stroškov v življenjskem ciklusu. Za pojasnilo konceptov so podani slikovni primeri.

General Information

Status
Published
Publication Date
18-May-2017
Withdrawal Date
02-Mar-2020
ICS
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
CLC/SR 56 - Dependability
Drafting Committee
IEC/TC 56 - IEC_TC_56
Current Stage
6060 - Document made available - Publishing
Start Date
19-May-2017
Completion Date
19-May-2017
Ref Project
SIST EN 60300-3-3:2017 - Dependability management - Part 3-3: Application guide - Life cycle costing (IEC 60300-3-3:2017)

Relations

Replaces
EN 60300-3-3:2004 - Dependability management - Part 3-3: Application guide - Life cycle costing
Effective Date
26-Jan-2023

Buy Standard

EN 60300-3-3:2017 - BARVEEN 60300-3-3:2017 - BARVE
PreviousNext
Standard
EN 60300-3-3:2017 - BARVE
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2017
1DGRPHãþD
SIST EN 60300-3-3:2007
8SUDYOMDQMH]DJRWRYOMLYRVWLGHO9RGLOR]DXSRUDER,]UDþXQVWURãNRYY
åLYOMHQMVNHPFLNOX ,(&
Dependability management - Part 3-3: Application guide - Life cycle costing (IEC 60300-
3-3:2017)
Zuverlässigkeitsmanagement - Teil 3-3: Anwendungsleitfaden - Lebenszykluskosten
(IEC 60300-3-3:2017)
Gestion de la sûreté de fonctionnement - Partie 3-3: Guide d'application - Evaluation du
coût de vie (IEC 60300-3-3:2017)
Ta slovenski standard je istoveten z: EN 60300-3-3:2017
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60300-3-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 21.020 Supersedes EN 60300-3-3:2004
English Version
Dependability management -
Part 3-3: Application guide - Life cycle costing
(IEC 60300-3-3:2017)
Gestion de la sûreté de fonctionnement - Partie 3-3: Guide Zuverlässigkeitsmanagement - Teil 3-3:
d'application - Évaluation du coût du cycle de vie Anwendungsleitfaden - Lebenszykluskosten
(IEC 60300-3-3:2017) (IEC 60300-3-3:2017)
This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60300-3-3:2017 E
European foreword
The text of document 56/1713/FDIS, future edition 3 of IEC 60300-3-3, prepared by IEC/TC 56
"Dependability" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2017-12-03
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-03-03
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 60300-3-3:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60300-3-3:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60300-1:2014 NOTE Harmonized as EN 60300-1:2014 (not modified).
IEC 62402 NOTE Harmonized as EN 62402.
IEC 62508 NOTE Harmonized as EN 62508.
IEC 62198 NOTE Harmonized as EN 62198.
IEC 61014 NOTE Harmonized as EN 61014.
IEC/ISO 31010 NOTE Harmonized as EN 31010.

IEC 60300-3-3 ®
Edition 3.0 2017-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Dependability management –
Part 3-3: Application guide – Life cycle costing

Gestion de la sûreté de fonctionnement –

Partie 3-3: Guide d’application – Évaluation du coût du cycle de vie

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 21.020 ISBN 978-2-8322-3886-8

– 2 – IEC 60300-3-3:2017 © IEC 2017
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 11
4 Concepts of life cycle costing . 11
4.1 Objectives of life cycle costing . 11
4.2 Application of life cycle costing . 12
4.3 Factors influencing LCC . 13
4.4 Factors related to dependability . 13
5 Life cycle costing process . 14
5.1 General . 14
5.2 Establish the organizational context . 14
5.2.1 Formulate the context . 14
5.2.2 Identify alternatives . 16
5.3 Plan the analysis . 16
5.3.1 Define scope and objectives of the analysis . 16
5.3.2 Define analysis tasks and identify contributing personnel . 16
5.3.3 Identify constraints . 17
5.3.4 Identify relevant financial parameters . 17
5.4 Define the analysis approach . 18
5.4.1 Establish rules/methodology . 18
5.4.2 Select or develop an LCC model . 18
5.4.3 Define the cost breakdown structure . 19
5.4.4 Identify areas of uncertainty . 20
5.5 Perform the analysis . 21
5.5.1 Establish methods for estimating cost elements . 21
5.5.2 Collect cost data . 21
5.5.3 Aggregate cost per item for each stage or time period . 22
5.5.4 Perform LCC and sensitivity analysis . 22
5.5.5 Review analysis . 22
5.5.6 Assess achievement of analysis objectives . 22
6 Finalize the analysis . 23
6.1 Identify follow-up actions . 23
6.2 Document analysis . 23
Annex A (informative) Life cycle costing and the life cycle . 24
A.1 General . 24
A.2 Typical LCC analyses . 25
A.3 Committed versus actual costs . 25
Annex B (informative) Financial concepts . 27
B.1 General . 27
B.2 Consequential costs . 27
B.3 Warranty costs . 28
B.4 Liability costs . 28

IEC 60300-3-3:2017 © IEC 2017 – 3 –
B.5 Opportunity costs, discounting, inflation and taxation . 29
B.5.1 General . 29
B.5.2 Opportunity costs. 29
B.5.3 Taxation . 29
B.5.4 Exchange rate . 29
B.5.5 Generally accepted accounting principles . 29
Annex C (informative) Application of financial evaluation techniques . 30
C.1 General . 30
C.2 Discounted cash flow (DCF) . 30
C.3 Internal rate of return (IRR) . 30
C.4 Depreciation and amortization . 30
C.5 Cost-benefit analysis . 30
C.6 Time value of money . 31
Annex D (informative) Cost breakdown structures by life cycle stage . 32
D.1 General . 32
D.2 Life cycle stage cost element . 32
D.2.1 General . 32
D.2.2 Concept . 32
D.2.3 Development . 32
D.2.4 Realization . 33
D.2.5 Utilization . 33
D.2.6 Enhancement . 34
D.2.7 Retirement . 34
D.3 Cost element explanation . 34
D.3.1 General . 34
D.3.2 Project management . 35
D.3.3 Engineering . 35
D.3.4 Producibility engineering and planning . 35
D.3.5 Manufacturing . 35
D.3.6 Facilities . 35
D.3.7 Support and test equipment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62506:2023(Main)
Methods for product accelerated testing
SIST EN IEC 62506:2024

IEC 62506:2023 provides guidance on the application of various accelerated test techniques for measurement or improvement of item reliability. Identification of potential failure modes that can be experienced in the use of an item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item reliability, or to achieve necessary reliability and availability improvement, all within a compressed or accelerated period of time. This document addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability can differ from the standard probability of failure occurrence. This document also extends to present accelerated testing or production screening methods that would identify weakness introduced into the item by manufacturing error, which can compromise item reliability. Services and people are however not covered by this document.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61124:2023(Main)
Reliability testing - Compliance tests for constant failure rate and constant failure intensity
SIST EN IEC 61124:2023

This International Standard gives a number of optimized test plans, the corresponding border lines and characteristics. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard specifies procedures to test whether an observed value of - failure rate, - failure intensity, - mean operating time to failure (MTTF), - mean operating time between failures (MTBF), conforms to a given requirement. It is assumed, except where otherwise stated, that during the accumulated test time, the times to failure or the operating times between failures are independent and identically exponentially distributed. This assumption implies that the failure rate or failure intensity is assumed to be constant. Four types of test plans are described as follows: - truncated sequential probability ratio test (SPRT); - fixed time/failure terminated test (FTFT); - fixed calendar time terminated test without replacement; - combined test. This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5. This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60300-3-5.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio
SIST EN IEC 61123:2020

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The sequential probability ratio test (SPRT) [1, 2][1] has been significantly developed in recent years [3, 4, 5]. This edition contains shorter and accurate tests, a wide range of test plans, and significant additional characteristic data, as follows: the tests are significantly truncated (the maximum trial numbers are low) without substantially increasing the expected number of trials to decision (ENT); the true producer’s and consumer’s risks (α', β') are given and very close to the nominal (α, β); the range of the test parameters is wide (failure ratio, risks and discrimination ratio); the test plans include various risk ratios (not restricted to equal risks only); the values of ENT are accurate and given in the relevant region (for practical use); guidelines for extension of the test sets (interpolation and extrapolation) are included. In Annex C, the use of the cumulative binomial distribution function of Excel that simplifies the procedure of designing has been added (Clause C.3). Keywords: verify if a reliability of an item/system complies with the stated requirements

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62402:2019(Main)
Obsolescence management
SIST EN IEC 62402:2019

IEC 62402:2019 provides requirements and guidance for obsolescence management applicable to any organization that is dependent on another organization to obtain value from the usefulness of the items that it provides. A cost-effective obsolescence management process and the activities used to implement the process are applicable throughout all phases of an item’s life cycle. This document covers the following areas: • establishing an obsolescence management policy; • establishing an infrastructure and an organization; • developing an obsolescence management plan (OMP); • developing strategies to minimize obsolescence during design; • determining an obsolescence management approach; • selecting obsolescence resolution and implementation; • measuring and improving the performance of the outcomes of the obsolescence management activities. Guidance on obsolescence management is included as notes, in the informative annexes and references in the Bibliography. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) this document has now been written with requirements as a standard, not a guide; b) this document continues to have guidance in the informative annexes; c) this document has been written as a general process for all technologies and items. Keywords: obsolescence management

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA)
SIST EN IEC 60812:2018

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or process, both locally and globally. It may also include identifying the causes of failure modes. Failure modes can be prioritized to support decisions about treatment. Where the ranking of criticality involves at least the severity of consequences, and often other measures of importance, the analysis is known as failure modes, effects and criticality analysis (FMECA). This document is applicable to hardware, software, processes including human action, and their interfaces, in any combination. An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a generic standard, does not give specific guidance for safety applications. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) the normative text is generic and covers all applications; b) examples of applications for safety, automotive, software and (service) processes have been added as informative annexes; c) tailoring the FMEA for different applications is described; d) different reporting formats are described, including a database information system; e) alternative means of calculating risk priority numbers (RPN) have been added; f) a criticality matrix based method has been added; g) the relationship to other dependability analysis methods have been described. Keywords: failure modes and effects analysis (FMEA), failure modes effects and criticality analysis (FMECA)

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62853:2018(Main)
Open systems dependability
SIST EN IEC 62853:2018

IEC 62853:2018 provides guidance in relation to a set of requirements placed upon system life cycles in order for an open system to achieve open systems dependability. This document elaborates on IEC 60300-1 by providing details of the changes needed to accommodate the characteristics of open systems. It defines process views based on ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes. This document is applicable to life cycles of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. For open systems, security is especially important since the systems are particularly exposed to attack. This document can be used to improve the dependability of open systems and to provide assurance that the process views specific to open systems achieve their expected outcomes. It helps an organization define the activities and tasks that need to be undertaken to achieve dependability objectives in an open system, including dependability related communication, dependability assessment and evaluation of dependability throughout system life cycles. Keywords: dependability of open systems

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62550:2017(Main)
Spare parts provisioning
SIST EN 62550:2017

IEC 62550:2017 describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for their intended application can be sustained. This document is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items.
Keywords: necessary spare parts

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61703:2016(Main)
Mathematical expressions for reliability, availability, maintainability and maintenance support terms
SIST EN 61703:2017

IEC 61703:2016 provides mathematical expressions for selected reliability, availability, maintainability and maintenance support measures defined in IEC 60050­192:2015. In addition, it introduces some terms not covered in IEC 60050-192:2015. They are related to aspects of the system of item classes (see hereafter). According to IEC 60050-192:2015, dependability [192-01-22] is the ability of an item to perform as and when required and an item [192-01-01] can be an individual part, component, device, functional unit, equipment, subsystem, or system. To account for mathematical constraints, this standard splits the items between the individual items considered as a whole (e.g. individual components) and the systems made of several individual items. It provides general considerations for the mathematical expressions for systems as well as individual items but the individual items which are easier to model are analysed in more detail with regards to their repair aspects. This standard is mainly applicable to hardware dependability, but many terms and their definitions may be applied to items containing software. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - standard made as self containing as possible; - item split between individual items and systems; - generalization of the dependability concepts for systems made of several components [introduction of the conditional failure intensity (Vesely failure rate); - introduction of the state-transition and the Markovian models; - generalization of the availability to production availability]; - introduction of curves to illustrate the various concepts. Keywords: mathematical expressions for dependability

  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62741:2015(Main)
Demonstration of dependability requirements - The dependability case
SIST EN 62741:2015

IEC 62741:2015 gives guidance on the content and application of a dependability case and establishes general principles for the preparation of a dependability case. This standard is written in a basic project context where a customer orders a system that meets dependability requirements from a supplier and then manages the system until its retirement. The methods provided in this standard may be modified and adapted to other situations as needed. The dependability case is normally produced by the customer and supplier but can also be used and updated by other organizations. For example, certification bodies and regulators may examine the submitted case to support their decisions and users of the system may update/expand the case, particularly where they use the system for a different purpose. Keywords: dependability, reliability, availability, maintainability, supportability, usability, testability, durability.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60300-1:2014(Main)
Dependability management - Part 1: Guidance for management and application
SIST EN 60300-1:2014

IEC 60300-1:2014 establishes a framework for dependability management. It provides guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. It presents guidance on planning and implementation of dependability activities and technical processes throughout the life cycle taking into account other requirements such as those relating to safety and the environment. This standard gives guidelines for management and their technical personnel to assist them to optimize dependability. This third edition cancels and replaces the second edition published in 2003 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - an updating of definitions to reflect IEC 60050-191:2014; - an enhanced description of dependability and its attributes; - a more generic approach to dependability management; - revised guidelines for application of dependability management; - a more generic approach to the life cycle; - a framework for dependability standards. Keywords: dependability management

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day