EN 62561-6:2011

Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)

IEC 62561-6:2011 specifies the requirements and tests for devices intended to count the number of lightning strike pulses flowing in a conductor. This conductor may be part of a lightning protection system (LPS) or connected to an SPD installation (or other conductors which are not intended to conduct a significant portion of lightning currents).

Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzähler (LSC)

Composants de système de protection contre la foudre (CSPF) - Partie 6: Exigences pour les compteurs de coups de foudre (LSC)

La CEI 62561-6:2011 spécifie les exigences et les essais à appliquer aux dispositifs destinés à compter le nombre de coups de foudre conduits à travers un conducteur. Ce conducteur peut faire partie d'un système de protection contre la foudre (SPF) ou être relié à une installation de parafoudre (ou d'autres conducteurs qui ne sont pas destinés à conduire une partie significative des courants de foudre).

Zahteve za elemente sistema za zaščito pred strelo (LPSC) - 6. del: Zahteve za števce udarov strele (LSC) (IEC 62561-6:2011, spremenjen)

Ta 6. del IEC 62561 opredeljuje zahteve in preskuse za naprave, namenjene štetju števila udarov strele v prevodniku. Ta prevodnik je lahko del sistema za zaščito pred strelo (LPS) ali povezan z namestitvijo SPD (ali drugimi prevodniki, ki niso namenjeni vodenju velikih delov tokov strele).

General Information

• Status: Withdrawn
• Publication Date: 15-Sep-2011
• Withdrawal Date: 27-Jul-2014
• ICS: 29.020 - Electrical engineering in general
• ICS: 91.120.40 - Lightning protection
• Technical Committee: CLC/TC 81X - Lightning protection
• Drafting Committee: IEC/TC 81 - IEC_TC_81
• Parallel Committee: IEC/TC 81 - IEC_TC_81
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2021
• Completion Date: 01-Mar-2021
• Ref Project: SIST EN 62561-6:2011 - Lightning Protection System Components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) (IEC 62561-6:2011, modified)

Relations

• Replaces: EN 50164-6:2009 - Lightning Protection Components (LPC) - Part 6: Requirements for lightning strike counters
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 62561-6:2018 - Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2011
1DGRPHãþD
SIST EN 50164-6:2009
=DKWHYH]DHOHPHQWHVLVWHPD]D]DãþLWRSUHGVWUHOR/36&GHO=DKWHYH]D
ãWHYFHXGDURYVWUHOH/6&,(&VSUHPHQMHQ
Lightning Protection System Components (LPSC) - Part 6: Requirements for lightning
strike counters (LSC) (IEC 62561-6:2011, modified)
Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzähler (LSC) (IEC
62561-6:2011, modifiziert)
Composants de système de protection contre la foudre (CSPF) - Partie 6: Exigences
pour les compteurs de coups de foudre (LSC) (CEI 62561-6:2011, modifiée)
Ta slovenski standard je istoveten z: EN 62561-6:2011
ICS:
91.120.40 =DãþLWDSUHGVWUHOR Lightning protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62561-6
NORME EUROPÉENNE
September 2011
EUROPÄISCHE NORM
ICS 29.020; 91.120.40 Supersedes EN 50164-6:2009

English version
Lightning protection system components (LPSC) -
Part 6: Requirements for lightning strike counters (LSC)
(IEC 62561-6:2011, modified)
Composants de système de protection Blitzschutzsystembauteile (LPSC) -
contre la foudre (CSPF) - Teil 6: Anforderungen an Blitzzähler (LSC)
Partie 6: Exigences pour les compteurs de (IEC 62561-6:2011, modifiziert)
coups de foudre (LSC)
(CEI 62561-6:2011, modifiée)
This European Standard was approved by CENELEC on 2011-07-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62561-6:2011 E
Foreword
The text of document 81/392/FDIS, future edition 1 of IEC 62561-6, prepared by IEC TC 81, Lightning
protection, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by the Technical Committee CENELEC TC 81X, Lightning protection,
was submitted to the formal vote.
The combined texts were approved by CENELEC as EN 62561-6:2011 on 2011-07-28.
This European Standard supersedes EN 50164-6:2009.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-07-28
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2014-07-28
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62561-6:2011 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-52:1996 NOTE  Harmonized as EN 60068-2-52:1996 (not modified).
IEC 61000-6-2 NOTE  Harmonized as EN 61000-6-2.

COMMON MODIFICATIONS
Whole document
Replace all references to IEC 62305 by references to EN 62305.
Replace all references to IEC 62561 by references to EN 62561.
2 Normative references
Replace this subclause by:
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 60068-2-52:1996, Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium
chloride solution) (IEC 60068-2-52:1996 + corr. July 1996)
EN 60068-2-75:1997, Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
(IEC 60068-2-75:1997)
– 3 – EN 62561-6:2011
EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 61000-6-4, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard
for industrial environments (IEC 61000-6-4)
EN 61180-1, High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and
procedure requirements (IEC 61180-1)
EN 62305 (series), Protection against lightning (IEC 62305 series)
EN ISO 4892-2:2006, Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc
lamps (ISO 4892-2:2006)
EN ISO 4892-3:2006, Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent
UV lamps (ISO 4892-3:2006)
EN ISO 6988:1994, Metallic and other non-organic coatings - Sulfur dioxide test with general
condensation of moisture (ISO 6988:1985)
ISO 4892-4:2004, Plastics - Methods of exposure to laboratory light sources - Part 4: Open-flame
carbon-arc lamps
ISO 6957:1988, Copper alloys - Ammonia test for stress corrosion resistance
3 Terms and definitions
In 3.5, replace the reference to IEC 60529 by EN 60529.
4.4 Design
In the third paragraph, replace the reference to IEC 60529 by EN 60529.
5 Classification
b
In Table 1, footnote , replace the reference to IEC 60060-1 by EN 60060-1.
6 Tests
In 6.4, fifth paragraph, replace all the references to IEC 60068-2-75:1997 by
EN 60068-2-75:1997.
In 6.5, replace the two references to IEC 60529 by EN 60529.
In 6.6.1, replace the reference to IEC 61180-1 by EN 61180-1.
7 Electromagnetic compatibility (EMC)
In 7.1, replace the reference to IEC 61000-6-4 by EN 61000-6-4.

In 7.2, replace the reference to IEC 61000-6-4 by EN 61000-6-4.
8 Structure and content of the test report
8.1 General
In the first sentence, replace “for laboratory test reports” by "for type test reports issued by the
laboratory".
Annex A (normative) Resistance to ultraviolet light
In A.2, replace the reference to ISO 4892-2:2006 by EN ISO 4892-2:2006.

In A.4, replace the reference to ISO 4892-3:2006 by EN ISO 4892-3:2006.

Annex B (normative) Conditioning/ageing for lightning strike counters
In Clause B.1, replace twice “IEC 60068-2-52:1996” by “EN 60068-2-52:1996”.
In Clause B.2, replace twice “ISO 6988:1985” by “EN ISO 6988:1994”.
Bibliography
In the second paragraph, replace the reference IEC 60068-2-52:1996 by
EN 60068-2-52:1996.
In the third paragraph, replace the reference IEC 61000-6-2 by EN 61000-6-2.
Add the following:
EN 60060-1, High-voltage test techniques - Part 1: General definitions and test requirements
(IEC 60060-1)
– 5 – EN 62561-6:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60060-1 - High-voltage test techniques - EN 60060-1 -
Part 1: General definitions and test
requirements
IEC 60068-2-52 1996 Environmental testing - EN 60068-2-52 1996
+ corr. July 1996 Part 2: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60068-2-75 1997 Environmental testing - EN 60068-2-75 1997
Part 2-75: Tests - Test Eh: Hammer tests

IEC 60529 - Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 61000-6-4 - Electromagnetic compatibility (EMC) - EN 61000-6-4 -
Part 6-4: Generic standards - Emission
standard for industrial environments

IEC 61180-1 - High-voltage test techniques for low-voltage EN 61180-1 -
equipment -
Part 1: Definitions, test and procedure
requirements
IEC 62305 Series Protection against lightning - EN 62305 Series
Part 1: General principles
ISO 4892-2 2006 Plastics - Methods of exposure to laboratory EN ISO 4892-2 2006
light sources -
Part 2: Xenon-arc lamps
ISO 4892-3 2006 Plastics - Methods of exposure to laboratory EN ISO 4892-3 2006
light sources -
Part 3: Fluorescent UV lamps
ISO 4892-4 2004 Plastics - Methods of exposure to laboratory - -
light sources -
Part 4: Open-flame carbon-arc lamps

ISO 6957 1988 Copper alloys - Ammonia test for stress - -
corrosion resistance
ISO 6988 1985 Metallic and other non-organic coatings - EN ISO 6988 1994
Sulfur dioxide test with general condensation
of moisture
IEC 62561-6 ®
Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lightning protection system components (LPSC) –
Part 6: Requirements for lightning strike counters (LSC)

Composants de système de protection contre la foudre (CSPF) –
Partie 6: Exigences pour les compteurs de coups de foudre (LSC)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 29.020; 91.120.40 ISBN 978-2-88912-557-9

– 2 – 62561-6 © IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 7
4 Requirements . 7
4.1 General . 7
4.2 Documentation . 7
4.3 Marking . 8
4.4 Design . 8
5 Classification . 8
6 Tests . 9
6.1 General test conditions . 9
6.2 Resistance to UV radiation tests . 10
6.3 Resistance tests to corrosion (for metallic parts) . 10
6.4 Mechanical tests . 10
6.5 Index of protection confirmation (IP Code) . 12
6.6 Electrical tests . 12
6.6.1 General conditions for test . 12
6.6.2 Minimum threshold current (I ) . 12
tc
6.6.3 Checking of non detection with I /2 . 12
tc
6.6.4 Withstand and counting at I current . 12
mcw
6.6.5 Multi pulse test . 12
6.7 Marking test. 12
7 Electromagnetic compatibility (EMC) . 13
7.1 Electromagnetic immunity . 13
7.2 Electromagnetic emission . 13
8 Structure and content of the test report . 13
8.1 General . 13
8.2 Report identification . 13
8.3 Specimen description . 14
8.4 Standards and references .
...