EN 62037-4:2012

Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables

IEC 62037-4:2012(E) is part of the IEC 62037 series, and defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by coaxial cables. Two dynamic test methods and a static test method are defined.

Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 4: Messung der passiven Intermodulation in koaxialen Kabeln

Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 4: Mesure de l’intermodulation passive dans les câbles coaxiaux

La CEI 62037-4:2012 définit les dispositifs et les procédures d'essai recommandés pour mesurer les niveaux d'intermodulation passive générés par les câbles coaxiaux. Deux méthodes d'essais dynamiques et une méthode d'essai statique sont définies. Tous les câbles coaxiaux sont soumis à l'essai statique et à l'essai dynamique d'une boucle de câble fixée. Les câbles classés comme souples ou semi-souples sont en plus soumis à l'essai dynamique avec outil de flexion.

Pasivne radiofrekvenčne (rf) in mikrovalovne naprave, meritve intermodulacijskega nivoja - 4. del: Meritve pasivne intermodulacije v koaksialnih kablih (IEC 62037-4:2012)

Ta del standarda IEC 62037 določa preskusne vpenjalne naprave in postopke, ki so priporočljivi za merjenje ravni pasivne intermodulacije, ki jo proizvedejo koaksialni kabli. Opredeljene so dve dinamični preskusni metodi in ena statična preskusna metoda. Za vse koaksialne kable se opravi statični in dinamični preskus s pripeto kabelsko zanko. Pri kablih, ki so uvrščeni med prožne ali polprožne kable, se poleg tega opravi tudi dinamični preskus prožnosti.

General Information

• Status: Published
• Publication Date: 06-Sep-2012
• Withdrawal Date: 27-Aug-2015
• ICS: 33.040.20 - Transmission systems
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: IEC/TC 46 - IEC_TC_46
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 07-Sep-2012
• Completion Date: 07-Sep-2012
• Ref Project: SIST EN 62037-4:2012 - Passive r.f. and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables (IEC 62037-4:2012)

Relations

• Replaces: EN 62037:1999 - RF connectors, connector cable assemblies and cables - Intermodulation level measurement
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62037-4:2012
01-november-2012
1DGRPHãþD
SIST EN 62037:2001
3DVLYQHUDGLRIUHNYHQþQHUILQPLNURYDORYQHQDSUDYHPHULWYH
LQWHUPRGXODFLMVNHJDQLYRMDGHO0HULWYHSDVLYQHLQWHUPRGXODFLMHYNRDNVLDOQLK
NDEOLK,(&
Passive r.f. and microwave devices, intermodulation level measurement - Part 4:
Measurement of passive intermodulation in coaxial cables (IEC 62037-4:2012)
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 4:
Messung der passiven Intermodulation in koaxialen Kabeln (IEC 62037-4:2012)
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 4:
Mesure de l’intermodulation passive dans les câbles coaxiaux (CEI 62037-4:2012)
Ta slovenski standard je istoveten z: EN 62037-4:2012
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
SIST EN 62037-4:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62037-4:2012

---------------------- Page: 2 ----------------------

SIST EN 62037-4:2012

EUROPEAN STANDARD
EN 62037-4

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 33.040.20 Supersedes EN 62037:1999 (partially)


English version


Passive RF and microwave devices, intermodulation level measurement -
Part 4: Measurement of passive intermodulation in coaxial cables
(IEC 62037-4:2012)


Dispositifs RF et à micro-ondes passifs, Passive HF- und Mikrowellenbauteile,
mesure du niveau d’intermodulation - Messung des Intermodulationspegels -
Partie 4: Mesure de l’intermodulation Teil 4: Messung der passiven
passive dans les câbles coaxiaux Intermodulation in koaxialen Kabeln
(CEI 62037-4:2012) (IEC 62037-4:2012)




This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62037-4:2012 E

---------------------- Page: 3 ----------------------

SIST EN 62037-4:2012
EN 62037-4:2012 - 2 -
Foreword
The text of document 46/418/FDIS, future edition 1 of IEC 62037-4, prepared by IEC TC 46 "Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62037-4:2012.
The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62037:1999 (PART).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62037-4:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62037-4:2012
- 3 - EN 62037-4:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited appl
...