Passive RF and microwave devices, intermodulation level measurement - Part 5: Measurement of passive intermodulation in filters

This part of IEC 62037 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for filters for use in low intermodulation (low IM) applications.

Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 5: Messung der passiven Intermodulation in Filtern

Dispositifs RF et à micro-ondes passifs, mesure du niveau d'intermodulation - Partie 5: Mesure de l'intermodulation passive dans les filtres

IEC 62037-5:2021 est disponible sous forme de IEC 62037-5:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62037-5:2021 définit les dispositifs et les procédures d’essai recommandés pour mesurer des niveaux d’intermodulation passive générés par des filtres, généralement utilisés dans des systèmes de communication sans fil. L’objectif est de définir des méthodes d’essai de qualification et de réception pour des filtres destinés à être utilisés dans des applications de faible intermodulation (faible IM). Cette seconde édition annule et remplace la première édition parue en 2013.Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a. mise à jour des exigences d’essais dynamiques pour définir l’énergie de choc et les emplacements auxquels les chocs doivent être appliqués aux dispositifs en essai.

Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve intermodulacijskega nivoja - 5. del: Meritve pasivne intermodulacije v filtrih (IEC 62037-5:2021)

Ta del standarda IEC 62037 določa preskusne vpenjalne naprave in postopke, ki so priporočljivi za merjenje ravni pasivne intermodulacije, ki jo proizvedejo filtri, običajno uporabljeni v brezžičnih komunikacijskih sistemih. Namen je določiti kvalifikacijske in sprejemljivostne preskusne metode za filtre za uporabo pri nizki intermodulaciji (nizka IM).

General Information

Status
Published
Publication Date
23-Dec-2021
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
24-Dec-2021
Completion Date
24-Dec-2021

Relations

Buy Standard

Standard
EN IEC 62037-5:2022
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62037-5:2022
01-marec-2022
Nadomešča:
SIST EN 62037-5:2014
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve
intermodulacijskega nivoja - 5. del: Meritve pasivne intermodulacije v filtrih (IEC
62037-5:2021)
Passive RF and microwave devices, intermodulation level measurement - Part 5:
Measurement of passive intermodulation in filters (IEC 62037-5:2021)
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 5:
Messung der passiven Intermodulation in Filtern (IEC 62037-5:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 5:
Mesure de l’intermodulation passive dans les filtres (IEC 62037-5:2021)
Ta slovenski standard je istoveten z: EN IEC 62037-5:2021
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
SIST EN IEC 62037-5:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62037-5:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 62037-5:2022


EUROPEAN STANDARD EN IEC 62037-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2021
ICS 33.040.20 Supersedes EN 62037-5:2013 and all of its amendments
and corrigenda (if any)
English Version
Passive RF and microwave devices, intermodulation level
measurement - Part 5: Measurement of passive intermodulation
in filters
(IEC 62037-5:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau Passive HF- und Mikrowellenbauteile, Messung des
d'intermodulation - Partie 5: Mesure de l'intermodulation Intermodulationspegels - Teil 5: Messung der passiven
passive dans les filtres Intermodulation in Filtern
(IEC 62037-5:2021) (IEC 62037-5:2021)
This European Standard was approved by CENELEC on 2021-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62037-5:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62037-5:2022
EN IEC 62037-5:2021 (E)
European foreword
The text of document 46/837/FDIS, future edition 2 of IEC 62037-5, prepared by IEC/TC 46 “Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62037-5:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–12–23
document have to be withdrawn
This document supersedes EN 62037-5:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62037-5:2021 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62037-5:2022
EN IEC 62037-5:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.