EN 61988-3-2:2009

Plasma display panels - Part 3-2: Interface - Electrical interface

IEC 61988-3-2:2009 defines the electrical interface of digital video data signals, synchronization signals and functional signals between the image processing board of the PDP set and the control board of the PDP module, and defines the description of the pin assignment of the connectors.

Plasmabildschirme - Teil 3-2: Schnittstelle - Elektrische Schnittstelle

Panneaux d'affichage à plasma - Partie 3-2: Interface - Interface électrique

La CEI 61988-3-2:2009 définit l'interface électrique des signaux de données vidéo numériques, des signaux de synchronisation et des signaux fonctionnels entre la carte de traitement d'image de l'ensemble PDP (plasma display panel) et la carte de commande du module PDP, et elle définit l'affectation des broches des connecteurs.

Plošče s plazemskim prikazovalnikom - 3-2. del: Električni vmesnik (IEC 61988-3-2:2009)

Ta del IEC 61988 določa električni vmesnik za digitalne podatkovne video signale, sinhronizacijske signale in funkcionalne signale med ploščo za obdelavo slik seta PDP in nadzorno ploščo modula PDP ter določa opis določanja polov konektorjev.

General Information

• Status: Published
• Publication Date: 05-Nov-2009
• Withdrawal Date: 31-Aug-2012
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/SR 110 - Flat panel display devices
• Drafting Committee: IEC/TC 110 - IEC_TC_110
• Parallel Committee: IEC/TC 110 - IEC_TC_110
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 06-Nov-2009
• Completion Date: 06-Nov-2009
• Ref Project: SIST EN 61988-3-2:2010 - Plasma display panels - Part 3-2: Electrical interface (IEC 61988-3-2:2009)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61988-3-2:2010
01-januar-2010
3ORãþHVSOD]HPVNLPSULND]RYDOQLNRPGHO(OHNWULþQLYPHVQLN,(&

Plasma display panels - Part 3-2: Electrical interface (IEC 61988-3-2:2009)
Plasmabildschirme - Teil 3-2: Schnittstelle - Elektrische Schnittstelle (IEC 61988-3-
2:2009)
Panneaux d'affichage à plasma - Partie 3-2: Interface électrique (CEI 61988-3-2:2009)
Ta slovenski standard je istoveten z: EN 61988-3-2:2009
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN 61988-3-2:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61988-3-2:2010

---------------------- Page: 2 ----------------------

SIST EN 61988-3-2:2010

EUROPEAN STANDARD
EN 61988-3-2

NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM

ICS 31.260


English version


Plasma display panels -
Part 3-2: Interface -
Electrical interface
(IEC 61988-3-2:2009)


Panneaux d'affichage à plasma -  Plasmabildschirme -
Partie 3-2: Interface - Teil 3-2: Schnittstelle -
Interface électrique Elektrische Schnittstelle
(CEI 61988-3-2:2009) (IEC 61988-3-2:2009)




This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-3-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61988-3-2:2010
EN 61988-3-2:2009 - 2 -
Foreword
The text of document 110/181/FDIS, future edition 1 of IEC 61988-3-2, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61988-3-2 on 2009-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61988-3-2:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE  Harmonized as EN 60068-1:1994 (not modified).
IEC 60107-1 NOTE  Harmonized as EN 60107-1:1997 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61988-3-2:2010
- 3 - EN 61988-3-2:2009

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61988-1 - Plasma display panels - EN 61988-1 2003
Part 1: Terminology and letter symbols


1) 2)
IEC 61988-2-1 - Plasma display panels - EN 61988-2-1 2002
Part 2-1: Measuring methods - Optical


1) 2)
IEC 61988-2-2 - Plasma display panels - EN 61988-2-2 2003
Part 2-2: Measuring methods - Optoelectrical


1)
ANSI TIA/ - Electrical Characteristics of Low Voltage - -
EIA-644-A Differential Signaling (LVDS) Interface C
...