EN 61500:2011
(Main)Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
IEC 61500:2009 establishes requirements for data communication which is used in systems performing category A functions in nuclear power plants. It covers also interface requirements for data communication of equipment performing category A functions with other systems including those performing category B and C functions and functions not important to safety. This second edition is intended to accomplish the following: - to change the focus from multiplexed data transmission to data communication; - to restrict the scope to communication in systems performing category A functions.
Kernkraftwerke - Leittechnik mit sicherheitstechnischer Bedeutung - Datenkommunikation in Systemen, die Kategorie-A-Funktionen ausführen
Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Communication de données dans les systèmes réalisant des fonctions de catégorie A
La CEI 61500:2009 établit des exigences applicables à la communication de données assurée pour des systèmes réalisant des fonctions de catégorie A dans les centrales nucléaires de puissance. Cela comprend aussi les exigences relatives aux interfaces des équipements de communication de données assurant des fonctions de catégorie A, avec les autres systèmes y compris ceux qui assurent des fonctions de catégories B et C, ainsi que des fonctions non importantes pour la sûreté. L'objectif de cette deuxième édition est de: - modifier le sujet et passer de la transmission multiplexée de données à la communication de données, - de restreindre le domaine à la communication au sein des systèmes réalisant des fonctions de catégories A.
Jedrske elektrarne - Merilna in nadzorna oprema za zagotavljanje varnosti - Podatkovne komunikacije v sistemih, ki izvajajo funkcije A
IEC 61500:2009 vzpostavlja zahteve za podatkovno komunikacijo, ki se uporablja v sistemih, ki izvajajo funkcije kategorije A v jedrskih elektrarnah. Zajema tudi zahteve za vmesnike za podatkovno komunikacijo opreme, ki izvaja funkcije kategorije A, z drugimi sistemi, vključno s tistimi, ki izvajajo funkcije kategorije B in C, ki niso pomembne za zagotavljanje varnosti. S to drugo izdajo želimo doseči naslednje:
- spremeniti osredotočenost s prenosa multipleksiranih podatkov na podatkovno komunikacijo;
- omejiti obseg uporabe na komunikacijo v sistemih, ki izvajajo funkcije kategorije A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2011
Jedrske elektrarne - Merilna in nadzorna oprema za zagotavljanje varnosti -
Podatkovne komunikacije v sistemih, ki izvajajo funkcije A
Nuclear power plants - Instrumentation and control systems important to safety - Data
communication in systems performing A functions
Kernkraftwerke - Leittechnik mit sicherheitstechnischer Bedeutung -
Datenkommunikation in Systemen, die Kategorie-A-Funktionen ausführen
Centrales nucléaires de puissance - Instrumentation et systèmes contrôle-commande
importants pour la sûreté - Communication de données dans les systèmes réalisant des
fonctions de catégorie A
Ta slovenski standard je istoveten z: EN 61500:2011
ICS:
27.120.20 Jedrske elektrarne. Varnost Nuclear power plants. Safety
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61500
NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM
ICS 27.120.20
English version
Nuclear power plants -
Instrumentation and control important to safety -
Data communication in systems performing category A functions
(IEC 61500:2009)
Centrales nucléaires de puissance - Kernkraftwerke -
Instrumentation et contrôle-commande Leittechnik mit sicherheitstechnischer
importants pour la sûreté - Bedeutung -
Communication de données dans les Datenkommunikation in Systemen, die
systèmes réalisant des fonctions de Kategorie-A-Funktionen ausführen
catégorie A (IEC 61500:2009)
(CEI 61500:2009)
This European Standard was approved by CENELEC on 2011-08-08. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61500:2011 E
Foreword
The text of the International Standard IEC 61500:2009, prepared by SC 45A, Instrumentation and control
of nuclear facilities, of IEC TC 45, Nuclear instrumentation, was submitted to the formal vote and was
approved by CENELEC as EN 61500 on 2011-08-08 without any modification.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-08-08
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-08-08
with the EN have to be withdrawn
As stated in the nuclear safety directive 2009/71/EURATOM, Chapter 1, Article 2, item 2, Member States
are not prevented from taking more stringent safety measures in the subject-matter covered by the
Directive, in compliance with Community law.
In a similar manner, this European standard does not prevent Member States from taking more stringent
nuclear safety measures in the subject-matter covered by this standard.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61500:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 series NOTE Harmonized in EN 60068 series (not modified).
IEC 60721 series NOTE Harmonized in EN 60721 series (not modified).
IEC 60964 NOTE Harmonized as EN 60964.
IEC 60965 NOTE Harmonized as EN 60965.
IEC 61158-3-19 NOTE Harmonized as EN 61158-3-19.
IEC 61508-1 NOTE Harmonized as EN 61508-1.
IEC 61508-2 NOTE Harmonized as EN 61508-2.
IEC 61508-3 NOTE Harmonized as EN 61508-3.
IEC 61508-4 NOTE Harmonized as EN 61508-4.
IEC 61784-3 NOTE Harmonized as EN 61784-3.
IEC 62138 NOTE Harmonized as EN 62138.
__________
- 3 - EN 61500:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60709 - Nuclear power plants - Instrumentation and EN 60709 -
control systems important to safety -
Separation
IEC 60780 1998 Nuclear power plants - Electrical equipment - -
of the safety system - Qualification
IEC 60880 2006 Nuclear power plants - Instrumentation and EN 60880 2009
control systems important to safety - Software
aspects for computer-based systems
performing category A functions
IEC 60980 - Recommended practices for seismic - -
qualification of electrical equipment of the
safety system for nuclear generating stations
IEC 60987 (mod) 2007 Nuclear power plants - Instrumentation and EN 60987 2009
control important to safety - Hardware design
requirements for computer-based systems
IEC 61000 Series Electromagnetic compatibility (EMC) EN 61000 Series
IEC 61226 - Nuclear power plants - Instrumentation and EN 61226 -
control important to safety - Classification of
instrumentation and control functions
IEC 61513 - Nuclear power plants - Instrumentation and - -
control for systems important to safety -
General requirements for systems
IEC 62340 2007 Nuclear power plants - Instrumentation and EN 62340 2010
control systems important to safety -
Requirements for coping with common cause
failure (CCF)
IAEA Safety guide 2002 Instrumentation and control systems important - -
NS-G-1.3 to safety in nuclear power plants
IEC 61500 ®
Edition 2.0 2009-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Nuclear power plants – Instrumentation and control important to safety – Data
communication in systems performing category A functions
Centrales nucléaires de puissance – Instrumentation et contrôle-commande
importants pour la sûreté – Communication de données dans les systèmes
réalisant des fonctions de catégorie A
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
P
CODE PRIX
ICS 27.120.20 ISBN 978-2-88910-523-6
– 2 – 61500 © IEC:2009
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.7
2 Normative references .7
3 Terms and definitions .8
4 Symbols and abbreviations.9
5 General requirements .9
5.1 Principles of selection of data communication techniques and equipment.9
5.2 Functional requirements .9
5.3 Performance requirements .10
5.4 Failure detection .10
5.5 Communication within division.10
5.6 Interfaces to systems of lower importance to safety.10
6 Physical separation and isolation.11
6.1 Electrical isolation .11
6.2 Physical separation .11
7 Functional independence.11
8 Reliability .12
8.1 Self-supervision and failure mitigation .12
8.1.1 Communication error detection .12
8.1.2 Response to failure .12
8.2 Test.12
8.3 Prevention of failures (including CCF) .13
9 Qualification .13
10 Maintenance and modification .14
Bibliography.15
61500 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
NUCLEAR POWER PLANTS –
INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY –
DATA COMMUNICATION IN SYSTEMS PERFORMING
CATEGORY A FUNCTIONS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.