iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60099-4:1993/A1:1998

(Amendment)

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

EN following parallel vote * Corrigendum to be issued taking into account DE & PT comments * Superseded by EN 60099-4:2004

Überspannungsableiter - Teil 4: Metalloxidableiter ohne Funkenstrecken für Wechselspannungsnetze

Parafoudres - Partie 4: Parafoudres à oxyde métallique sans éclateur pour réseaux à courant alternatif

Prenapetostni odvodniki - 4. del: Kovinsko-oksidni prenapetostni odvodniki brez iskrišč za sisteme z izmenično napetostjo (IEC 60099-4:1991/A1:1998)

General Information

Status
Withdrawn
Publication Date
29-Apr-1998
Withdrawal Date
31-Dec-2000
ICS
29.120.50 - Fuses and other overcurrent protection devices
29.240.10 - Substations. Surge arresters
Technical Committee
CLC/SR 37 - Surge arresters
Drafting Committee
IEC/TC 37 - IEC_TC_37
Parallel Committee
IEC/TC 37 - IEC_TC_37
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-May-2007
Completion Date
01-May-2007
Ref Project
SIST EN 60099-4:1998/A1:2002 - Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Relations

Replaced By
EN 60099-4:2004 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Effective Date
29-Jan-2023
Amends
EN 60099-4:1993 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Effective Date
29-Jan-2023

Buy Standard

EN 60099-4:1998/A1:2002EN 60099-4:1998/A1:2002
PreviousNext
Amendment
EN 60099-4:1998/A1:2002
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2002
3UHQDSHWRVWQLRGYRGQLNLGHO.RYLQVNRRNVLGQLSUHQDSHWRVWQLRGYRGQLNLEUH]
LVNULãþ]DVLVWHPH]L]PHQLþQRQDSHWRVWMR ,(&$
Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Überspannungsableiter -- Teil 4: Metalloxidableiter ohne Funkenstrecken für
Wechselspannungsnetze
Parafoudres -- Partie 4: Parafoudres à oxyde métallique sans éclateur pour réseaux à
courant alternatif
Ta slovenski standard je istoveten z: EN 60099-4:1993/A1:1998
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
29.240.10 Transformatorske postaje. Substations. Surge arresters
Prenapetostni odvodniki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 60099-4:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60099-5:2018(Main)
Surge arresters - Part 5: Selection and application recommendations
SIST EN IEC 60099-5:2018

NEW!IEC 60099-5:2018 is available as IEC 60099-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60099-5:2018 provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure – rated 52 kV and less as defined in IEC 60099-6 and metal-oxide surge arresters with external series gap for overhead transmission and distribution lines (EGLA) as defined in IEC 60099-8. In Annex J, some aspects regarding the old type of SiC gapped arresters are discussed. Surge arrester residual voltage is a major parameter to which most users have paid a lot of attention to when selecting the type and rating. Typical maximum residual voltages are given in Annex F. It is likely, however, that for some systems, or in some countries, the requirements on system reliability and design are sufficiently uniform, so that the recommendations of the present standard may lead to the definition of narrow ranges of arresters. The user of surge arresters will, in that case, not be required to apply the whole process introduced here to any new installation and the selection of characteristics resulting from prior practice may be continued. Annexes H and I present comparisons and calculations between old line discharge classification and new charge classification. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition regarding the new surge arrester classification introduced in IEC 60099-4:2014: a) Expanded discussion of comparison between the old and new classification and how to calculate or estimate the corresponding charge for different stresses. b) New annexes dealing with: - Comparison between line discharge classes and charge classification - Estimation of arrester cumulative charges and energies during line switching Keywords: selection and application of surge arrestors, nominal voltages above 1 kV

  • Standard
    193 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-4:2014(Main)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SIST EN 60099-4:2014

IEC 60099-4:2014 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits with Us above 1 kV. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. The numerous changes between the second and third editions are listed in the Foreward of the document. Keywords: testing of gapless metal-oxide surge arresters for a.c.power systems

  • Standard
    172 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    174 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-9:2014(Main)
Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
SIST EN 60099-9:2014

IEC 60099-9:2014 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit overvoltages in HVDC converter stations of two terminal, multiterminal and back-to-back type up to and including an operating voltage of 1 100 kV. The standard applies in general to porcelain-housed and polymer-housed type arresters but also to gas-insulated metal enclosed arresters (GIS-arresters) solely used as d.c. bus and d.c. line/cable arresters. Arresters for voltage source converters are not covered. Arresters applied on the a.c. systems at the converter station and subjected to power-frequency voltage of 50 or 60 Hz principally without harmonics are tested as per IEC 60099-4. The arresters on a.c.-filters are tested according to this standard. Keywords: testing of gapless metal-oxide surge arrestors for HVDC converter stations

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-4:2004/prAB(Amendment)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SIST EN 60099-4:2004/oprAB:2005

Work merged into 37/324/FDIS (pr=16386) * Standstill maintained

  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-4:2004/prAA(Amendment)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SIST EN 60099-4:200X/OprAA:2004

Work merged into 37/324/FDIS (pr=16386) * Standstill maintained

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60099-5:2018(Main)
Surge arresters - Part 5: Selection and application recommendations
SIST EN IEC 60099-5:2018

NEW!IEC 60099-5:2018 is available as IEC 60099-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60099-5:2018 provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure – rated 52 kV and less as defined in IEC 60099-6 and metal-oxide surge arresters with external series gap for overhead transmission and distribution lines (EGLA) as defined in IEC 60099-8. In Annex J, some aspects regarding the old type of SiC gapped arresters are discussed. Surge arrester residual voltage is a major parameter to which most users have paid a lot of attention to when selecting the type and rating. Typical maximum residual voltages are given in Annex F. It is likely, however, that for some systems, or in some countries, the requirements on system reliability and design are sufficiently uniform, so that the recommendations of the present standard may lead to the definition of narrow ranges of arresters. The user of surge arresters will, in that case, not be required to apply the whole process introduced here to any new installation and the selection of characteristics resulting from prior practice may be continued. Annexes H and I present comparisons and calculations between old line discharge classification and new charge classification. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition regarding the new surge arrester classification introduced in IEC 60099-4:2014: a) Expanded discussion of comparison between the old and new classification and how to calculate or estimate the corresponding charge for different stresses. b) New annexes dealing with: - Comparison between line discharge classes and charge classification - Estimation of arrester cumulative charges and energies during line switching Keywords: selection and application of surge arrestors, nominal voltages above 1 kV

  • Standard
    193 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-4:2014(Main)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SIST EN 60099-4:2014

IEC 60099-4:2014 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits with Us above 1 kV. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. The numerous changes between the second and third editions are listed in the Foreward of the document. Keywords: testing of gapless metal-oxide surge arresters for a.c.power systems

  • Standard
    172 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    174 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-9:2014(Main)
Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
SIST EN 60099-9:2014

IEC 60099-9:2014 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit overvoltages in HVDC converter stations of two terminal, multiterminal and back-to-back type up to and including an operating voltage of 1 100 kV. The standard applies in general to porcelain-housed and polymer-housed type arresters but also to gas-insulated metal enclosed arresters (GIS-arresters) solely used as d.c. bus and d.c. line/cable arresters. Arresters for voltage source converters are not covered. Arresters applied on the a.c. systems at the converter station and subjected to power-frequency voltage of 50 or 60 Hz principally without harmonics are tested as per IEC 60099-4. The arresters on a.c.-filters are tested according to this standard. Keywords: testing of gapless metal-oxide surge arrestors for HVDC converter stations

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-4:2004/prAB(Amendment)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SIST EN 60099-4:2004/oprAB:2005

Work merged into 37/324/FDIS (pr=16386) * Standstill maintained

  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60099-4:2004/prAA(Amendment)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SIST EN 60099-4:200X/OprAA:2004

Work merged into 37/324/FDIS (pr=16386) * Standstill maintained

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day