EN 61300-3-21:1998
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time
EN following parallel vote
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 3-21: Untersuchungen und Messungen - Schaltzeit und Prellzeit
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-21: Examens et mesures - Durée de fermeture et de rebondissement à la commutation
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time (IEC 61300-3-21:1998)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61300-3-21:1999
01-maj-1999
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-21: Examinations and measurements -
Switching time and bounce time (IEC 61300-3-21:1998)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-21: Examinations and measurements - Switching
time and bounce time
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 3-21: Untersuchungen und Messungen - Schaltzeit und Prellzeit
Dispositifs d'interconnection et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-21: Examens et mesures - Durée de
fermeture et de rebondissement à la commutation
Ta slovenski standard je istoveten z: EN 61300-3-21:1998
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-21:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61300-3-21:1999
---------------------- Page: 2 ----------------------
SIST EN 61300-3-21:1999
---------------------- Page: 3 ----------------------
SIST EN 61300-3-21:1999
---------------------- Page: 4 ----------------------
SIST EN 61300-3-21:1999
---------------------- Page: 5 ----------------------
SIST EN 61300-3-21:1999
---------------------- Page: 6 ----------------------
SIST EN 61300-3-21:1999
NORME
CEI
INTERNATIONALE
IEC
61300-3-21
INTERNATIONAL
Première édition
STANDARD
First edition
1998-04
Dispositifs d’interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d’essais et de mesures –
Partie 3-21:
Examens et mesures –
Durée de fermeture et de rebondissement
à la commutation
Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 3-21:
Examinations and measurements –
Switching time and bounce time
IEC 1998 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE E
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 61300-3-21:1999
61300-3-21 © IEC:1998 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-21: Examinations and measurements –
Switching time and bounce time
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.