EN IEC 62769-6-200:2023

Field Device Integration (FDI®) - Part 6-200: Technology Mapping - HTML5

IEC 62769-6-200:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User Interface Plug-in (UIP) for the Runtime HTML5. [1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

Feldgeräteintegration (FDI®) - Teil 6-200: FDI-Technologieabbildungen - HTML5

Intégration des appareils de terrain (FDI®) - Partie 6-200: Mapping de technologies - HTML5

L'IEC 62769-6-200:2023 spécifie le mapping de technologies pour les concepts décrits dans la norme d'intégration des appareils de terrain (FDI®[1], Field Device Integration). Le mapping de technologies porte essentiellement sur la mise en œuvre des composants Client FDI® et Plugiciel d'interface utilisateur (UIP, User Interface Plug-in) à l'aide de l'environnement d'exécution HTML5. [1] FDI est une marque déposée de l’organisation à but non lucratif Fieldbus Foundation, Inc. Cette information est donnée à l'intention des utilisateurs du présent document et ne signifie nullement que l'IEC approuve le détenteur de la marque ou l'emploi de ses produits. La conformité n'exige pas l'utilisation de la marque. L'utilisation de la marque exige l'autorisation du détenteur de la marque.

Integracija procesne naprave (FDI®) - 6-200. del: Preslikava tehnologije - HTML5 (IEC 62769-6-200:2023)

Ta del standarda IEC 62769 določa preslikavo tehnologije za koncepte, opisane v standardu za integracijo procesne naprave (FDI® 1).
Preslikava tehnologije se osredotoča na izvajanje v zvezi z odjemalcem FDI® in vtičnikom uporabniškega vmesnika (UIP) za čas izvajanja .HTML5.

General Information

• Status: Published
• Publication Date: 01-Jun-2023
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 02-Jun-2023
• Due Date: 28-Oct-2022
• Completion Date: 02-Jun-2023
• Ref Project: SIST EN IEC 62769-6-200:2023 - Field Device Integration (FDI®) - Part 6-200: Technology Mapping - HTML5 (IEC 62769-6-200:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Integracija procesne naprave (FDI®) - 6-200. del: Preslikava tehnologije - HTML5
(IEC 62769-6-200:2023)
Field Device Integration (FDI®) - Part 6-200: Technology Mapping - HTML5 (IEC 62769-
6-200:2023)
Feldgeräteintegration (FDI®) - Teil 6-200: FDI-Technologieabbildungen - HTML5 (IEC
62769-6-200:2023)
Intégration des appareils de terrain (FDI®) - Partie 6-200: Mapping de technologies -
HTML5 (IEC 62769-6-200:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-6-200:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-6-200

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 25.040.40; 35.100.05
English Version
Field Device Integration (FDI®) - Part 6-200: Technology
Mapping - HTML5
(IEC 62769-6-200:2023)
Intégration des appareils de terrain (FDI®) - Partie 6-200: Feldgeräteintegration (FDI®) - Teil 6-200: FDI-
Mapping de technologies - HTML5 Technologieabbildungen - HTML5
(IEC 62769-6-200:2023) (IEC 62769-6-200:2023)
This European Standard was approved by CENELEC on 2023-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-6-200:2023 E

European foreword
The text of document 65E/870/CDV, future edition 1 of IEC 62769-6-200, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-6-200:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-6-200:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
FCG TS10099 - Field Device Integration (FDI®) – - -
Technology Management
IEC 62769-1 2021 Field Device Integration (FDI) - Part 1: EN IEC 62769-1 2021
Overview
IEC 62769-2 2021 Field Device Integration (FDI) - Part 2: FDI EN IEC 62769-2 2021
Client
IEC 62769-4 - Field Device Integration (FDI®) - Part 4: FDI - -
Packages
IEC 62769-6-100 - Field Device Integration (FDI®) - Part 6-100: - -
Technology Mapping - .Net
W3C HTML5.0 - W3C Recommendation HTML5 - - -
A vocabulary and associated APIs for HTML
and XHTML
IEC 62769-6-200 ®
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside ®
Field Device Integration (FDI ) –
Part 6-200: Technology Mapping – HTML5 ®
Intégration des appareils de terrain (FDI ) –
Partie 6-200: Mapping de technologies – HTML5
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-6820-9
– 2 – IEC 62769-6-200:2023 © IEC 2023
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms, acronyms and conventions . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms and acronyms . 7
3.3 Conventions . 7
4 Technical concepts . 7
4.1 General . 7
4.1.1 Overview . 7 ®
4.1.2 FDI Type Library . 7
4.2 UIP representation . 9
4.2.1 Self containment . 9
4.2.2 External libraries and supplementary files . 10
4.3 UIP compatibility rules . 10
4.3.1 Overview . 10 ®
4.3.2 FDI Type Library Compatibility Strategy . 10
4.3.3 Runtime compatibility strategy . 10
4.3.4 UIP executable compatibility rules . 11
4.4 UIP Deployment . 11
4.5 UIP Life-cycle . 11
4.5.1 General . 11
4.5.2 UIP activation steps . 12
4.5.3 UIP deactivation . 13
4.5.4 General rules for UIP activation and deactivation . 13 ®
4.6 Interaction between an FDI Client and a UIP . 14
4.6.1 Handling of standard UI elements . 14
4.6.2 Non-blocking service execution . 14
4.6.3 Threading . 16
4.6.4 Timeout . 17
4.6.5 Exception handling . 17
4.6.6 Type safe interfaces . 18
4.6.7 Globalization and localization . 18
4.7 Security . 19
4.7.1 General . 19
4.7.2 Access permissions . 19
5 Interface definition . 20
Bibliography . 25
®
Figure 1 – FDI Type Library structure . 8 ®
Figure 2 – Relationship between FDI Type Library, host specific and UIP specific
implementation of the interfaces . 8
Figure 3 – Examples of UIP supplementary data files include javascript files, css files,

and images . 9
Figure 4 – Compatibility strategy to host UIPs built for different Runtime Versions . 11

IEC 62769-6-200:2023 © IEC 2023 – 3 –
Figure 5 – UIP Life-cycle. 12
Figure 6 – UIP activation process . 13 ®
Figure 7 – Asynchronous service execution example (FDI Client) . 15 ®
Figure 8 – Cancelled asynchronous service execution example (FDI Client) . 15
Figure 9 – Asynchronous service execution example (UIP) . 16
Figure 10 – Simplified code sample to illustrate the described function implementation . 16
Figure 11 – Component interaction . 18

Table 1 – Base Property Services . 20
Table 2 – Device Model Services . 21
Table 3 – Access Control Services . 21
Table 4 – Direct Access Services . 21
Table 5 – Hosting Services . 22
Table 6 – UIP Services . 23
Table 7 – Base Data Types . 23
Table 8 – Special Types . 24
Table 9 – Parameter Types . 24

– 4 – IEC 62769-6-200:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________ ®
FIELD DEVICE INTEGRATION (FDI ) –

Part 6-200: Technology Mapping – HTML5

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referr
...