EN 50377-3-1:2001

Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2 category A1a and A1b multimode fibre

Superseded by EN 50377-3-1:2008

Steckverbinder zur Verwendung in Lichtwellenleiter-Kommunikationssystemen - Produktnormen - Teil 3-1: Bauart SG zum Anschluß von Mehrmodenfasern nach IEC 60793-2, Kategorie A1a und A1b

Jeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produit - Partie 3-1: Type SG câblés sur fibres multimodales de catégorie A1a et A1b de la CEI 60793-2

Konektorski pribor in povezovalne komponente za uporabo v komunikacijskih sistemih s pomočjo optičnih vlaken – Specifikacije izdelka – 3-1. del: Tip SG zaključen na več-rodnemvlaknu kategorij A1 in A1b po IEC 60 793-2*

General Information

• Status: Withdrawn
• Publication Date: 29-Aug-2001
• Withdrawal Date: 31-Mar-2003
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Dec-2010
• Completion Date: 01-Dec-2010
• Ref Project: SIST EN 50377-3-1:2004 - Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications -- Part 3-1: Type SG terminated on IEC 60793-2 category A1a and A1b multimode fibre

Relations

• Replaced By: EN 50377-3-1:2008 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50377-3-1:2004
01-september-2004
.RQHNWRUVNLSULERULQSRYH]RYDOQHNRPSRQHQWH]DXSRUDERYNRPXQLNDFLMVNLK
VLVWHPLKVSRPRþMRRSWLþQLKYODNHQ±6SHFLILNDFLMHL]GHOND±GHO7LS6*
]DNOMXþHQQDYHþURGQHPYODNQXNDWHJRULM$LQ$ESR,(&
Connector sets and Interconnect components to be used in optical fibre communication
systems - Product specifications -- Part 3-1: Type SG terminated on IEC 60793-2
category A1a and A1b multimode fibre
Steckverbinder zur Verwendung in Lichtwellenleiter-Kommunikationssystemen -
Produktnormen -- Teil 3-1: Bauart SG zum Anschlu von Mehrmodenfasern nach IEC
60793-2, Kategorie A1a und A1b
Jeux de connecteurs et composants d'interconnexion utiliser dans les systmes de
communication par fibres optiques - Spcifications de produit -- Partie 3-1: Type SG cbls
sur fibres multimodales de catgorie A1a et A1b de la CEI 60793-2
Ta slovenski standard je istoveten z: EN 50377-3-1:2001
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 50377-3-1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50377-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 33.180.20
English version
Connector sets and Interconnect components
to be used in optical fibre communication systems -
Product specifications
Part 3-1: Type SG terminated on IEC 60793-2
category A1a and A1b multimode fibre
Jeux de connecteurs et composants Steckverbinder zur Verwendung in
d'interconnexion à utiliser dans les Lichtwellenleiter-Kommunikations-
systèmes de communication par fibres systemen -
optiques - Produktnormen
Spécifications de produit Teil 3-1: Bauart SG zum Anschluß von
Partie 3-1: Type SG câblés sur fibres Mehrmodenfasern nach IEC 60793-2,
multimodales de catégorie A1a et A1b de Kategorie A1a und A1b
la CEI 60793-2
This European Standard was approved by CENELEC on 2000-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50377-3-1:2001 E

---------------------- Page: 2 ----------------------

EN 50377-3-1:2001 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic connectors.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
EN 186540 on 2000-04-01. According to the new numbering scheme accepted by the 107th Technical Board of
CENELEC, the standard was renamed EN 50377-3-1.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-03-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-04-01
__________

---------------------- Page: 3 ----------------------

- 3 - EN 50377-3-1:2001
PRODUCT SPECIFICATION FOR CONNECTOR SET TO BE USED IN
MULTIMODE OPTICAL FIBRE COMMUNICATION SYSTEMS
Type: SG terminated on IEC 60793-2 Category A1a, A1b or equivalent fibre
Description Performance
Coupling mechanism: latched push-pull Application: For use in an IEC Category C
Environment
Configuration: plug/socket Attenuation Grade: M: ≤0,75dB
(Random Mate) 95% ≤0,5dB
Fibre Category: IEC 60793-2 type
A1a and A1b
see para 3 Return Loss Grade:
R: ≥20dB
(Random Mate)
Cable Type see table 2
Related documents:
EN 186000 Generic Specification for Optical Fibre Connectors
EN 61300- Basic Test and Measurement Procedures
EN 50173 Information Technology - Generic Cabling Systems
IEC 60793-2 Optical Fibres - Part 2 Product Specifications
IEC 61753 Performance Standard - Part 1 General and Guidance
IEC 61753-3-3 Performance Standard - Part 2
...