prEN IEC 60413:2024
(Main)Test procedures for determining physical properties of brush materials for electrical machines
Test procedures for determining physical properties of brush materials for electrical machines
Méthodes d'essai pour la mesure des propriétés physiques des matières de balais pour machines électriques
Testni postopki za določanje fizikalnih lastnosti krtačnih materialov za električne stroje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60413:2024
01-april-2024
Testni postopki za določanje fizikalnih lastnosti krtačnih materialov za električne
stroje
Test procedures for determining physical properties of brush materials for electrical
machines
Méthodes d'essai pour la mesure des propriétés physiques des matières de balais pour
machines électriques
Ta slovenski standard je istoveten z: prEN IEC 60413:2024
ICS:
29.160.10 Sestavni deli rotacijskih Components for rotating
strojev machines
oSIST prEN IEC 60413:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60413:2024
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60413:2024
2/2175/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60413 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-09 2024-05-03
SUPERSEDES DOCUMENTS:
2/2121/CD, 2/2151A/CC
IEC TC 2 : ROTATING MACHINERY
SECRETARIAT: SECRETARY:
United Kingdom Mr Charles Whitlock
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Test procedures for determining physical properties of brush materials for electrical machines
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60413:2024
2/2175/CDV – 2 – IEC CDV 60413 © IEC:2024
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and symbols . 11
4 Test specimen . 18
4.1 General . 18
4.2 Types of test specimen . 18
4.2.1 General . 18
4.2.2 Type A . 19
4.2.3 Type B . 19
4.2.4 Type C . 20
4.2.5 Type D . 20
4.3 Preparation of test specimens . 20
4.3.1 General . 20
4.3.2 Relation between dimensions and grain direction . 20
4.3.3 Requirements on test specimens .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.