EN 140401-802:2007
(Main)Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2
Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2
2021: CLC legacy converted by DCLab NISOSTS
Bauartspezifikation: SMD Schicht-Festwiderstände niedriger Belastbarkeit - Rechteckig - Stabilitätsklassen 1; 2
Spécification particulière: Résistances couche fixes à faible dissipation CMS - Rectangulaires - Classes de stabilité 1; 2
Podrobna specifikacija: Fiksni folijski upori majhnih moči za površinsko montažo - Pravokotni - Razreda stabilnosti 1; 2
Različni parametri te komponente so natančno določeni v tej specifikaciji. Nedoločeni parametri se lahko razlikujejo med komponentami.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2Spécification particuliere: Résistances couche fixes a faible dissipation CMS - Rectangulaires - Catégories de stabilité 1; 2Bauartspezifikation: SMD Schicht-Festwiderstände niedriger Belastbarkeit - Rechteckig - Stabilitätsklassen 1; 2Ta slovenski standard je istoveten z:EN 140401-802:2007SIST EN 140401-802:2008en31.040.10Fiksni uporFixed resistorsICS:SIST EN 140401-802:2003/A1:2004SIST EN 140401-802:20031DGRPHãþDSLOVENSKI
STANDARDSIST EN 140401-802:200801-januar-2008
EUROPEAN STANDARD EN 140401-802 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 140401-802:2007 E
ICS 31.040.10 Supersedes EN 140401-802:2002 + A1:2004
English version
Detail specification:
Fixed low power film SMD resistors -
Rectangular -
Stability classes 1; 2
Spécification particulière:
Résistances couche fixes
à faible dissipation CMS -
Rectangulaires -
Catégories de stabilité 1; 2
Bauartspezifikation:
SMD Schicht-Festwiderstände
niedriger Belastbarkeit -
Rechteckig -
Stabilitätsklassen 1; 2
This European Standard was approved by CENELEC on 2007-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 140401-802:2007 – 2 – Foreword This European Standard was prepared by the Technical Committee CENELEC TC 40XB, Resistors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 140401-802 on 2007-05-01. This European Standard supersedes EN 140401-802:2002 + A1:2004. Preceding documents on the subject covered by this specification have been – CECC 40 401-802:1998, only on resistors without established reliability, now version A – CECC 40 401-002:1993, – CECC 40 401-004:1984; 1985; 1990; 1992, – CECC 40 401-007:1989; 1990; 1992, only on resistors with established reliability, now version E – CECC 40 401-006:1989; 1991; 1993. Compared to the superseded standard, the following changes have been implemented: – modification of the title; – introduction of a test on the resistance to electrostatic discharge in 1.6 and Annex A; – introduction of description and test methods for lead-free soldering in 1.8, 1.10.3 and Annex A; – introduction of the code letters for temperature coefficient as given in EN 60062; – revision of the ordering information in 1.9.4; – revised information on pulse load capability in 1.10.6; – revised information on resistance value drift in 1.10.7; – revised information on current noise in 1.10.9; – adoption of the IECQ rules of procedure, QC 001002-3; – revision of the sample quantities and the sequence of tests in Annex A; – editorial revision. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-05-01 This specification is part of four documents describing fixed resistors for surface mount technology as follows: EN 60115-1 Fixed resistors for use in electronic equipment - Part 1: Generic specification
(IEC 60115-1, mod.) EN 140400 Sectional specification: Fixed low power surface mount (SMD) resistors EN 140401 Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors EN 140401-802 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes
1; 2 __________
– 3 – EN 140401-802:2007 Table of contents 1 Characteristics and ratings.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.