EN IEC 62561-6:2023
(Main)Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSCs)
Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSCs)
This part of IEC 62561 specifies the requirements and tests for devices intended to count the number of lightning strikes based on the current flowing in a conductor. This conductor may be part of a lightning protection system (LPS) or connected to an SPD installation or other conductors, which are not intended to conduct a significant portion of lightning currents. LSCs for use in hazardous atmospheres, extra requirements for the components may be necessary to be taken. NOTE In CENELEC countries, testing requirements of components for explosive atmosphere are specified in CLC/TS 50703-2.
Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzähler (LSC)
Composants des systèmes de protection contre la foudre (CSPF) - Partie 6: Exigences pour les compteurs de coups de foudre (LSC)
IEC 62561-6:2023 est disponible sous forme de IEC 62561-6:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62561-6:2023 spécifie les exigences et les essais applicables aux dispositifs destinés à compter le nombre de coups de foudre à partir du courant qui circule dans un conducteur. Ce conducteur peut faire partie d'un système de protection contre la foudre (SPF) ou être relié à une installation de parafoudre ou à d'autres conducteurs, qui ne sont pas destinés à conduire une partie significative des courants de foudre. Cette troisième édition annule et remplace la deuxième édition parue en 2018. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) ajout d'une nouvelle classification en fonction du circuit interne des LSC; b) mise à jour du logigramme des essais de l'Annexe C pour refléter la nouvelle classification; c) ajout de l'applicabilité d'essais précédents (Annexe D).
Elementi za zaščito pred strelo (LPSC) - 6. del: Zahteve za števce udarov strele (LSC) (IEC 62561-6:2023)
Ta del standarda IEC 62561 določa zahteve in preskuse za naprave, predvidene za štetje števila udarov strele na podlagi pretakanja toka v prevodniku. Ta prevodnik je lahko del sistema za zaščito pred strelo (LPS) ali povezan z inštalacijo SPD ali drugimi prevodniki, ki niso predvideni za prevajanje bistvenega deleža tokov strele.
Pri števcih udarov strele za uporabo v nevarnih atmosferah morda veljajo dodatne zahteve za komponente.
OPOMBA: V državah CENELEC so zahteve za preskušanje komponent za eksplozivne atmosfere določene v dokumentu CLC/TS 50703-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62561-6:2023
01-september-2023
Elementi za zaščito pred strelo (LPSC) - 6. del: Zahteve za števce udarov strele
(LSC) (IEC 62561-6:2023)
Lightning protection system components (LPSC) - Part 6: Requirements for lightning
strike counters (LSC) (IEC 62561-6:2023)
Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzähler (LSC) (IEC
62561-6:2023)
Composants des systèmes de protection contre la foudre (CSPF) - Partie 6: Exigences
pour les compteurs de coups de foudre (LSC) (IEC 62561-6:2023)
Ta slovenski standard je istoveten z: EN IEC 62561-6:2023
ICS:
91.120.40 Zaščita pred strelo Lightning protection
SIST EN IEC 62561-6:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62561-6:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62561-6:2023
EUROPEAN STANDARD EN IEC 62561-6
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 29.020; 91.120.40 Supersedes EN IEC 62561-6:2018; EN IEC 62561-
6:2018/AC:2018-04
English Version
Lightning protection system components (LPSC) - Part 6:
Requirements for lightning strike counters (LSCs)
(IEC 62561-6:2023)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen
(CSPF) - Partie 6: Exigences pour les compteurs de coups an Blitzzähler (LSC)
de foudre (LSC) (IEC 62561-6:2023)
(IEC 62561-6:2023)
This European Standard was approved by CENELEC on 2023-06-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62561-6:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62561-6:2023
EN IEC 62561-6:2023 (E)
European foreword
The text of document 81/723/FDIS, future edition 3 of IEC 62561-6, prepared by IEC/TC 81 "Lightning
protection" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62561-6:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-03-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-19
document have to be withdrawn
This document supersedes EN IEC 62561-6:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62561-6:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61180 NOTE Approved as EN 61180
IEC 62305 (series) NOTE Approved as EN 62305 (series)
IEC 62475 NOTE Approved as EN 62475
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62561-6:2023
EN IEC 62561-6:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.