EN 61753-022-2:2003
(Main)Fibre optic interconnecting devices and passive components performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
Fibre optic interconnecting devices and passive components performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
Provides the minimum requirements and severities which a fibre optic connector terminated on multimode fibre must satisfy in order to be considered as meeting the IEC standard category C - controlled environment, as defined in annex A of IEC 61753-1-1.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 022-2: Lichtwellenleiter-Steckverbinder zum Anschluss an Mehrmodenfasern der Kategorie C - Geregelte Umgebung
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 022-2: Connecteurs à fibres optiques raccordés à une fibre multimode pour la catégorie C - Environnement contrôlé
Izvedbeni standard povezovalnih naprav in pasivnih komponent optičnih vlaken – 022-2. del: Konektorji optičnih vlaken, ki se zaključujejo na več-rodnih vlaknih kategorije C; kontrolirano okolje (IEC 61753-022-2:2003)*
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61753-022-2:2004
STANDARD
september 2004
Izvedbeni standard povezovalnih naprav in pasivnih komponent optičnih
vlaken – 022-2. del: Konektorji optičnih vlaken, ki se zaključujejo na več-
rodnih vlaknih kategorije C; kontrolirano okolje (IEC 61753-022-2:2003)*
Fibre optic interconnecting devices and passive components performance
standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for
category C - Controlled environment (IEC 61753-022-2:2003)
ICS 33.180.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61753-022-2
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003
ICS 33.180.20
English version
Fibre optic interconnecting devices
and passive components performance standard
Part 022-2: Fibre optic connectors terminated on multimode fibre
for category C - Controlled environment
(IEC 61753-022-2:2003)
Norme de qualité de fonctionnement Lichtwellenleiter-Verbindungselemente
des dispositifs d'interconnexion und passive Bauteile -
et composants passifs à fibres optiques Betriebsverhalten
Partie 022-2: Connecteurs à fibres Teil 022-2: Lichtwellenleiter-
optiques raccordés à une fibre multimode Steckverbinder zum Anschluss
pour la catégorie C - an Mehrmodenfasern der Kategorie C -
Environnement contrôlé Geregelte Umgebung
(CEI 61753-022-2:2003) (IEC 61753-022-2:2003)
This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-022-2:2003 E
Foreword
The text of document 86B/1776/FDIS, future edition 1 of IEC 61753-022-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-022-2 on 2003-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-03-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A, B and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-022-2:2003 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61753-022-2:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793-2 1998 Optical fibres - -
Part 2: Product specifications
IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
1)
IEC 61300-2-1 1995 Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 1997
2)
IEC 61300-2-2 1995 Part 2-2: Tests - Mating durability EN 61300-2-2 1997
IEC 61300-2-4 1995 Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 1997
IEC 61300-2-6 1995 Part 2-6: Tests - Tensile strength of EN 61300-2-6 1997
coupling mechanism
IEC 61300-2-12 1995 Part 2-12: Tests - Impact EN 61300-2-12 1997
3)
IEC 61300-2-17 1995 Part 2-17: Tests - Cold EN 61300-2-17 1997
IEC 61300-2-18 1995 Part 2-18: Tests - Dry heat - High EN 61300-2-18 1997
temperature endurance
IEC 61300-2-19 1995 Part 2-19: Tests - Damp heat EN 61300-2-19 1997
(steady state)
IEC 61300-2-22 1995 Part 2-22: Tests - Change of EN 61300-2-22 1997
temperature
IEC 61300-2-42 1998 Part 2-42: Tests - Static side load for EN 61300-2-42 1998
connectors
1)
EN 61300-2-1 is superseded by EN 61300-2-1:2003, which is based on IEC 61300-2-1:2003.
2)
EN 61300-2-2 is superseded by EN 61300-2-2:2003, which is based on IEC 61300-2-2:2003.
3)
EN 61300-2-17 is superseded by EN 61300-2-17:2003, which is based on IEC 61300-2-17:2003.
Publication Year Title EN/HD Year
4)
IEC 61300-3-3 1997 Part 3-3: Examinations and EN 61300-3-3 1997
measurements - Monitoring change in
attenuation and in return loss (multiple
paths)
IEC 61300-3-4 2001 Part 3-4: Examinations and EN 61300-3-4 2001
measurements - Attenuation
5)
IEC 61300-3-6 1997 Part 3-6: Examinations and EN 61300-3-6 1997
measurements - Return loss
IEC 61300-3-28 2002 Part 3-28: Examinations and EN 61300-3-28 2002
measurements - Transient loss
IEC 61300-3-34 2001 Part 3-34: Examinations and EN 61300-3-34 2002
measurements - Attenuation of random
mated connectors
IEC 61753-1-1 2000 Fibre optic interconnecting devices and EN 61753-1-1 2001
passive components performance
standard
Part 1-1: General and guidance -
Interconnecting devices (connectors)
4)
EN 61300-3-3 is superseded by EN 61300-3-3:2003, which is based on IEC 61300-3-3:2003.
5)
EN 61300-3-6 is superseded by EN 61300-3-6:2003, which is based on IEC 61300-3-6:2003.
INTERNATIONAL IEC
STANDARD 61753-022-2
First edition
2003-02
Fibre optic interconnecting devices and
passive components performance standard –
Part 022-2:
Fibre optic connectors terminated on multimode fibre
for category C – Controlled environment
Norme de qualité de fonctionnement des dispositifs
d’interconnexion et composants passifs à fibres optiques –
Partie 022-2:
Connecteurs à fibres optiques raccordés à une fibre multimode
pour la catégorie C – Environnement contrôlé
© IEC 2003 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale L
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue
’���’ � !"�������� ©����#����$�%
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS PERFORMANCE STANDARD –
Part 022-2: Fibre optic connectors terminated
on multimode fibre for category C –
Controlled environment
����*���
% �5������$������8����8;��;��������5���8;�����������%����8�<��;�<������=8��>8�����������8��8���>8��������?�����=
8;;� �8����8;� �;��������5���8;� ����������� $���� �8����8;� ����������%K� �5�� ��M���� ��� �5�� ���� ��� ��� ?������
������8����8;�����?��8��������8;;�Q������������������=���8��8���>8���������5���;������8;�8����;������������;��K���
�5��� ���� 8��� ��� 8�������� ��� ��5��� 8���U�����X� �5�� ���� ?��;��5��� ������8����8;� ��8��8���K� �5���� ?��?8�8����� ��
���������� ��� ���5���8;� ����������Y� 8�Z� ���� �8����8;� ���������� ����������� ��� �5�� ���M���� ��8;�� <��5� �8Z
?8�����?8��� ��� �5��� ?��?8�8���Z� <��[K� ������8����8;X� =�U�������8;� 8��� ����=�U�������8;� ��=8��>8������ ;�8����=
<��5��5������8;���?8�����?8�������5���?��?8�8����K��5��������;;8���8�����;���;Z�<��5��5��������8����8;���=8��>8����
���� ��8��8���>8����� $���%� ��� 8�����8���� <��5� ����������� ����������� �Z� 8=�������� ���<���� �5�� �<�
��=8��>8�����K
�% �5�� ����8;� ���������� ��� 8=��������� ��� �5�� ���� ��� ���5���8;� �8������ �\?����X� 8�� ��8�;Z� 8�� ?�����;�X� 8�
������8����8;���������������?����������5����;�U8������M������������8�5����5���8;�����������58����?������8����
�����8;;�������������8����8;�����������K
�% �5������������?��������58U���5�������������������8����������������8����8;�����8���8���?��;��5�������5������
��� ��8��8���X� ���5���8;� �?������8�����X� ���5���8;� ��?����� ��� =������ 8��� �5�Z� 8��� 8���?���� �Z� �5�� �8����8;
���������������58�������K
]%�� ��� ������ ��� ?������� ������8����8;� ������8����X� ���� �8����8;� ����������� ������8[�� ��� 8??;Z� ���� ������8����8;
��8��8���� ��8��?8����;Z� ��� �5�� �8\����� �\����� ?�����;�� ��� �5���� �8����8;� 8��� ��=���8;� ��8��8���K� ��Z
��U��=����� ���<���� �5�� ���� ��8��8��� 8��� �5�� ������?�����=� �8����8;� ��� ��=���8;� ��8��8��� �58;;� ��� �;�8�;Z
�����8��������5��;8����K
"%�� �5�� ���� ?��U����� ��� �8�[��=� ?��������� ��� �����8��� ���� 8??��U8;� 8��� �8����� ��� ��������� ���?�����;�� ���� 8�Z
�Q��?��������;8����������������������Z�<��5��������������8��8���K
�%�� ���������������8<������5��?������;��Z��58�����������5���;�����������5���������8����8;���8��8����8Z�����5�����M���
���?8�������=5��K��5�������58;;��������5�;�����?�����;�������������Z��=�8�Z����8;;����5�?8�������=5��K
������8����8;���8��8�������� !"��������58�������?��?8�����Z���������������^�‘#��������?���
��������������=���U�����8���?8���U�����?������X�����������5���8;�����������^�#��������?����K
�5����\������5�����8��8�������8��������5����;;�<��=����������#
���� ��?�������U����=
^�‘{ !!�{���� ^�‘{ ^��{�|�
��;;�������8���������5��U����=������5��8??��U8;�����5�����8��8��� �8�� ��� ������ ��� �5�� ��?���� ��
U����=������8��������5��8��U���8�;�K
�5���?��;��8�����58���������8��������8�����8����<��5��5�����{�����������U��X�}8����K
�5������������58�����������58���5���������������5���?��;��8�����<�;;����8������58�=�������;�����K
����5����8��X��5��?��;��8�����<�;;���
~ �����������Y
~ <��5��8<�Y
~ ��?;8�����Z�8���U������������X���
~ 8������K
����;��=�8;�U�����������5���?��;��8������8Z�����������8��8�;8�����8��K
� !"�������� ©����#����$�% ’���’
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS PERFORMANCE STANDARD –
Part 022-2: Fibre optic connectors terminated
on multimode fibre for category C –
Controlled environment
1 Scope
�5���?8����������� !"������8�����5������������Q����������8�����U��������<5��5�8��������?���
����������������8���������;�������������������8����Z�����������������8��=�������8��������=��5�
������8��8����8��=��Z���’�������;;�����U��������X�8�������������8���\����������� !"�� � K
2 Normative references
�5����;;�<��=����������������������8��������?���8�;�������5��8??;��8���������5�����������K����
�8���� ����������X� ��;Z� �5�� �������� ������ 8??;���K� ���� ���8���� ����������X� �5�� ;8����� �������� ��
�5����������������������$���;����=�8�Z�8���������%�8??;���K
��!����# ��^X� Optical fibres – Part 2: Product specifications
� ����$8;;�?8���%X� Fibre optic interconnecting devices and passive components
� ������ # ��"X� Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
� �������# ��"X� Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-2: Tests – Mating durability
� ������]# ��"X� Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre/cable retention
� �������# ��" , Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-6: Tests – Tensile strength of coupling mechanism
� ������ �# ��"X� Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-12: Tests – Impact
� ������ !# ��"X� Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-17: Tests – Cold
� ������ ^# ��"X� Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-18: Tests – Dry heat – High temperature endurance
� ������ �# ��"X� Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-19: Tests – Damp heat (steady state)
� ��������# ��"X� Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-22: Tests – Change of temperature
’�]�’ � !"�������� ©����#����$�%
� ������]�# ��^X� Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-42: Tests – Static side load for connectors
� �������# ��!X� Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-3: Examinations and measurements – Monitoring change in
attenuation and in return loss (multiple paths)
� ������]#��� X� Fibre optic interconnecting devices and passive components – Basic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.