EN 50164-4:2008

Lightning Protection Components (LPC) - Part 4: Requirements for conductor fasteners

This European standard specifies requirements and tests for: − metallic and non-metallic conductor fasteners that are used in conjunction with the air termination system and down conductors; − fixing of fasteners to the fabric / membrane / gravel roofing of structures is not covered by this standard due to the vast number and types used in modern day construction. LPC may also be suitable for use in hazardous atmospheres. Regard should then be taken of the extra requirements necessary for the components to be installed in such conditions.

Blitzschutzbauteile - Teil 4: Anforderungen an Halter

Diese Europäische Norm legt die Anforderungen und Prüfungen für: – metallische und nichtmetallische Leitungshalter (im Folgenden als Halter bezeichnet) fest, die in Verbindung mit Fangleitungen und Ableitungen verwendet werden; – die Befestigung von Haltern auf Bauwerken mit Dachpappe-, Membran- und Kiesbedachung wird in der vorliegenden Norm wegen der Unmenge und Arten, die bei den neuzeitlichen Bauten zum Einsatz kommen, nicht behandelt. Blitzschutzbauteile können auch für die Verwendung in explosionsfähigen Atmosphären geeignet sein. Dann sollten jedoch die besonderen Anforderungen berücksichtigt werden, die für die unter derartigen Bedingungen zu installierenden Bauteile erforderlich sind.

Composants de protection contre la foudre (CPF) - Partie 4: Prescriptions pour les fixations de conducteur

Cette Norme Européenne spécifie les exigences et les essais pour: − Les supports métalliques et non métalliques de conducteur qui sont employés avec des dispositifs de capture et des conducteurs de descente; − La fixation des supports sur les structures d'édifice / membrane / toiture gravillonnée, n’est pas traitée par cette norme, en raison des nombreuses solutions modernes de construction. Les CPF peuvent aussi être employés dans des atmosphères dangereuses. Dans ce cas, il convient de veiller à ce que les caractéristiques des composants soient en adéquation avec ces conditions.

Elementi za zaščito pred strelo (LPC) - 4. del: Zahteve za pritrdilne elemente

General Information

• Status: Withdrawn
• Publication Date: 06-Aug-2008
• Withdrawal Date: 31-Mar-2011
• ICS: 91.120.40 - Lightning protection
• Technical Committee: CLC/TC 81X - Lightning protection
• Drafting Committee: IEC/TC 81 - IEC_TC_81
• Parallel Committee: IEC/TC 81 - IEC_TC_81
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 21-Feb-2014
• Completion Date: 21-Feb-2014
• Ref Project: SIST EN 50164-4:2008 - Lightning Protection Components (LPC) -- Part 4: Requirements for conductor fasteners

Relations

• Replaced By: EN 62561-4:2011 - Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50164-4:2008
01-december-2008
(OHPHQWL]D]DãþLWRSUHGVWUHOR/3&GHO=DKWHYH]DSULWUGLOQHHOHPHQWH
Lightning Protection Components (LPC) -- Part 4: Requirements for conductor fasteners
Blitzschutzbauteile -- Teil 4: Anforderungen an Halter
Composants de protection contre la foudre (CPF) -- Partie 4: Prescriptions pour les
fixations de conducteur
Ta slovenski standard je istoveten z: EN 50164-4:2008
ICS:
91.120.40 =DãþLWDSUHGVWUHOR Lightning protection
SIST EN 50164-4:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50164-4:2008

---------------------- Page: 2 ----------------------

SIST EN 50164-4:2008

EUROPEAN STANDARD
EN 50164-4

NORME EUROPÉENNE
August 2008
EUROPÄISCHE NORM

ICS 91.120.40


English version


Lightning Protection Components (LPC) -
Part 4: Requirements for conductor fasteners



Composants de protection  Blitzschutzbauteile -
contre la foudre (CPF) - Teil 4: Anforderungen an Halter
Partie 4: Prescriptions
pour les fixations de conducteur




This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50164-4:2008 E

---------------------- Page: 3 ----------------------

SIST EN 50164-4:2008
EN 50164-4:2008 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 81X, Lightning protection.
The text of the draft was submitted to the Unique Acceptance procedure and was approved by CENELEC as
EN 50164-4 on 2008-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-04-01
EN 50164 is a family standard and consists of the following parts under the generic title “Lightning Protection
Components (LPC)”:
Part 1 Requirements for connection components
Part 2 Requirements for conductors and earth electrodes
Part 3 Requirements for isolating spark gaps
Part 4 Requirements for conductor fasteners
1)
Part 5 Requirements for earth electrode inspection housings and earth electrode seals
1)
Part 6 Requirements for lightning strike counters
Part 7 Requirements for earthing enhancing compounds
__________

1)
In preparation.

---------------------- Page: 4 ----------------------

SIST EN 50164-4:2008
- 3 - EN 50164-4:2008
Contents
1 Scope . 4
2 Normative references . 4
3 Definitions . 4
4 Classification . 4
4.1 According to the material composition . 4
4.2 According to fixing arrangement of the conductor within the fastener . 4
4.3 According to conductor clamping
...