EN IEC 61784-1-5:2023

Industrial networks - Profiles - Part 1-5: Fieldbus profiles - Communication Profile Family 5

IEC 61784-1-5:2023 defines Communication Profile Family 5 (CPF 5). CPF 5 specifies a set of protocol specific communication profiles (CPs) based on the IEC 61158 series (Type 7) and other standards, to be used in the design of devices involved in communications in factory manufacturing and process control. NOTE All CPs are based on standards or draft standards or International Standards published by the IEC or on standards or International Standards established by other standards bodies or open standards processes. Each CP selects an appropriate consistent and compatible subset of services and protocols from the relevant set that is defined and modelled in the IEC 61158 series. For the selected subset of services and protocols, the profile also describes any possible or necessary constraints in parameter values.

Industrielle Kommunikationsnetze - Profile - Teil 1-5: Feldbusprofile - Kommunikationsprofilfamilie (CPF) 5

Réseaux industriels – Profils – Partie 1-5: Profils de bus de terrain – Famille de profils de communication 5

L’IEC 61784-1-5:2023 définit la famille de profils de communication 5 (CPF 5). La CPF 5 définit un jeu de profils de communication (CP) spécifiques au protocole, fondé sur la série IEC 61158 (type 7) et d’autres normes, à utiliser pour la conception d’appareils employés en communication dans le cadre de la production industrielle et de la commande de processus. NOTE Tous les CP sont fondés sur des normes, des projets de normes ou des Normes internationales publiées par l’IEC, ou bien sur des normes ou des Normes internationales établies par d’autres organismes de normalisation, ou encore sur des processus de normes ouvertes. Chaque CP sélectionne un sous-ensemble de services et de protocoles approprié, cohérent et compatible, à partir de l’ensemble du jeu disponible défini et modélisé dans la série IEC 61158. Le profil décrit également, pour le sous-ensemble sélectionné de services et de protocoles, toute contrainte possible ou nécessaire au niveau des valeurs des paramètres.

Industrijska omrežja - Profili - 1-5. del: Profili procesnih vodil - Komunikacijski profil skupine 5 (IEC 61784-1-5:2023)

Standard IEC 61784-1-5:2023 določa družino komunikacijskih profilov 5 (CPF 5). Družina komunikacijskih profilov 5 določa sklop komunikacijskih profilov (CP), specifičnih za protokol, na osnovi skupine standardov IEC 61158 (tip 7) in drugih standardov, za uporabo pri oblikovanju naprav, vključenih v postopkih komunikacije v tovarniški proizvodnji in kontroli procesa.
OPOMBA: Vsi komunikacijski profili temeljijo na standardih ali osnutkih standardov ali mednarodnih standardih, ki jih je objavila komisija IEC, oziroma na standardih ali mednarodnih standardih, ki so jih določili drugi organi za standarde ali procesi odprtih standardov.
Vsak komunikacijski profil izbere skladno in združljivo podskupino opravil ter protokolov iz ustreznega sklopa, ki je definiran in modeliran v skupini standardov IEC 61158. Za izbrane podskupine opravil in protokolov profil opisuje tudi morebitne potrebne ali nujne omejitve vrednosti parametrov.

General Information

• Status: Published
• Publication Date: 27-Apr-2023
• ICS: 35.100.20 - Data link layer
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Apr-2023
• Completion Date: 28-Apr-2023
• Ref Project: SIST EN IEC 61784-1-5:2023 - Industrial networks - Profiles - Part 1-5: Fieldbus profiles - Communication Profile Family 5 (IEC 61784-1-5:2023)

Relations

• Splited From: EN IEC 61784-1:2019 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
• Effective Date: 18-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Industrijska omrežja - Profili - 1-5. del: Profili procesnih vodil - Komunikacijski
profil skupine 5 (IEC 61784-1-5:2023)
Industrial networks - Profiles - Part 1-5: Fieldbus profiles - Communication Profile Family
5 (IEC 61784-1-5:2023)
Industrielle Kommunikationsnetze - Profile - Teil 1-5: Feldbusprofile –
Kommunikationsprofilfamilie (CPF) 5 (IEC 61784-1-5:2023)
Réseaux industriels - Profils - Partie 1-5: Profils de bus de terrain - Famille de profils de
communication 5 (IEC 61784-1-5:2023)
Ta slovenski standard je istoveten z: EN IEC 61784-1-5:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61784-1-5

NORME EUROPÉENNE
EUROPÄISCHE NORM April 2023
ICS 35.100.20; 35.240.50 Supersedes EN IEC 61784-1:2019 (partially)
English Version
Industrial networks - Profiles - Part 1-5: Fieldbus profiles -
Communication Profile Family 5
(IEC 61784-1-5:2023)
Réseaux industriels - Profils - Partie 1-5: Profils de bus de Industrielle Kommunikationsnetze - Profile - Teil 1-5:
terrain - Famille de profils de communication 5 Feldbusprofile – Kommunikationsprofilfamilie (CPF) 5
(IEC 61784-1-5:2023) (IEC 61784-1-5:2023)
This European Standard was approved by CENELEC on 2023-04-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-1-5:2023 E

European foreword
The text of document 65C/1207/FDIS, future edition 1 of IEC 61784-1-5, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-1-5:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-25
document have to be withdrawn
This document, together with other parts of the same series, partially supersedes EN IEC 61784-
1:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-1-5:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60793 (series) NOTE Approved as EN IEC 60793 (series)
IEC 61158-1 NOTE Approved as EN IEC 61158-1
IEC 61158-3 (series) NOTE Approved as EN 61158-3 (series)
IEC 61158-4 (series) NOTE Approved as EN 61158-4 (series)
IEC 61158-5 (series) NOTE Approved as EN 61158-5 (series)
IEC 61158-6 (series) NOTE Approved as EN 61158-6 (series)
IEC 61784-1 (series) NOTE Approved as EN IEC 61784-1 (series)
IEC 61784-2 (series) NOTE Approved as EN IEC 61784-2 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61158 series Industrial communication networks - EN IEC 61158 series
Fieldbus specifications
IEC 61158-2 2023 Industrial communication networks - EN IEC 61158-2 2023
Fieldbus specifications - Part 2: Physical
layer specification and service definition
IEC 61158-3-7 2007 Industrial communication networks - EN 61158-3-7 2008
Fieldbus specifications - Part 3-7: Data-link
layer service definition - Type 7 elements
IEC 61158-4-7 2007 Industrial communication networks - EN 61158-4-7 2008
Fieldbus specifications - Part 4-7: Data-link
layer protocol specification - Type 7
elements
IEC 61158-5-7 2007 Industrial communication networks - EN 61158-5-7 2008
Fieldbus specifications - Part 5-7:
Application layer service definition - Type 7
elements
IEC 61158-6-7 2007 Industrial communication networks - EN 61158-6-7 2008
Fieldbus specifications - Part 6-7:
Application layer protocol specification -
Type 7 elements
IEC 61784-1-0 2023 Industrial networks - Profiles - Part 1-0: EN IEC 61784-1-0 2023
Fieldbus profiles - General concepts and
terminology
IEC 61784-1-1 2023 Industrial networks - Profiles - Part 1-1: EN IEC 61784-1-1 2023
Fieldbus profiles - Communication Profile
Family 1
IETF RFC 791 1981 Internet Protocol - -
IETF RFC 793 1981 Transmission Control Protocol - -

IEC 61784-1-5 ®
Edition 1.0 2023-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –

Part 1-5: Fieldbus profiles – Communication Profile Family 5

Réseaux industriels – Profils –

Partie 1-5: Profils de bus de terrain – Famille de profils de communication 5

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 35.100.20; 35.240.50 ISBN 978-2-8322-6589-5

– 2 – IEC 61784-1-5:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviated terms, symbols, and conventions . 8
3.1 Terms and definitions . 8
3.2 Abbreviations and symbols . 8
3.2.1 Common abbreviations and symbols . 8
3.2.2 Other abbreviations and symbols . 8
3.3 Conventions . 8
4 CPF 5 (WorldFIP®) . 8
4.1 General overview . 8
4.2 CP 5/1 (WorldFIP) . 9
4.2.1 Physical layer . 9
4.2.2 Data-link layer . 11
4.2.3 Application layer . 14
4.3 CP 5/2 (WorldFIP) . 20
4.3.1 Physical layer . 20
4.3.2 Data-link layer . 20
4.3.3 Application layer . 20
4.4 CP 5/3 (WorldFIP) . 26
4.4.1 Physical layer . 26
4.4.2 Data-link layer . 26
4.4.3 Application layer . 26
Annex A (informative) CPF 5 (WorldFIP) communication concepts . 28
A.1 Physical layer characteristics . 28
A.2 Data-link layer characteristics . 28
A.3 Application layer characteristics . 28
Bibliography . 29

Table 1 – CPF 5: overview of profile sets . 9
Table 2 – CPF 5: PhL selection . 10
Table 3 – CPF 5: DLL service selection . 11
Table 4 – CPF 5: DLL service selection of Clause 4 . 12
Table 5 – CPF 5: DLL protocol selection . 12
Table 6 – CPF 5: DLL protocol selection of variables and resources . 13
Table 7 – CPF 5: DLL protocol selection of DLPDUs . 13
Table 8 – CP 5/1: AL service selection . 14
Table 9 – CP 5/1: AL service selection of ASEs . 14
Table 10 – CPF 5: AL service selection of MPS ASEs . 14
Table 11 – CPF 5: AL service selection of variable elements . 15
Table 12 – CPF 5: AL service selection of produced variable elements . 15
Table 13 – CPF 5: AL service selection of consumed variable elements . 15
Table 14 – CP 5/1: AL service selection of MPS services . 16

IEC 61784-1-5:2023 © IEC 2023 – 3 –
Table 15 – CP 5/1, 5/2: AL service selection of A_Readloc service parameters . 16
Table 16 – CP 5/1, 5/2: AL service selection of A_Readfar service parameters . 16
Table 17 – CP 5/1, 5/2: AL service selection of A_Read service parameters . 17
Table 18 – CP 5/1: AL service selection of MCS service classes . 17
Table 19 – CP 5/1: AL service selection of QoS . 17
Table 20 – CP 5/1: AL service selection of MCS services . 17
Table 21 – CP 5/1, 5/2: AL service selection of A_Data parameters . 18
Table 22 – CP 5/1: AL protocol selection . 18
Table 23 – CPF 5/1: AL protocol selection of MPS data types . 18
Table 24 – CPF 5/1: AL protocol selection of MPS PDUs .
...