EN 62561-3:2017
(Main)Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
IEC 62561-3:2017(E) specifies the requirements and tests for isolating spark gaps (ISG) for lightning protection systems. ISGs can be used to indirectly bond a lightning protection system to other nearby metalwork where a direct bond is not permissible for functional reasons. This second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. - a new classification has been added related to ISGs location installation; - an updated flow chart of tests has been developed.
Blitzschutzsystembauteile (LPSC) - Teil 3: Anforderungen an Trennfunkenstrecken
Composants des systèmes de protection contre la foudre (CSPF) - Partie 3: Exigences pour les éclateurs d'isolement
L'IEC 62561-3:2017 spécifie les exigences et les essais à appliquer aux éclateurs d'isolement liés à un système de protection contre la foudre. Les éclateurs d'isolement peuvent être utilisés pour raccorder indirectement un système de protection contre la foudre à une partie métallique proche, lorsqu'un raccordement direct n'est pas admissible pour des raisons fonctionnelles. La présente version bilingue (2018-11) correspond à la version anglaise monolingue publiée en 2017-06. Cette deuxième édition annule et remplace la première édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - une nouvelle classification a été ajoutée concernant l'emplacement de l'installation des éclateurs d'isolement; - un logigramme d'essais mis à jour a été développé. La version française de cette norme n'a pas été soumise au vote
Elementi za zaščito pred strelo (LPSC) - 3. del: Zahteve za izolacijska iskrišča
Ta del standarda IEC 62561 določa zahteve in preskuse za izolacijska iskrišča (ISG) sistemov za zaščito pred strelo.
Izolacijska iskrišča se lahko uporabljajo za posredno povezovanje sistema za zaščito pred strelo z drugimi bližnjimi kovinskimi konstrukcijami, kjer neposredna povezava ni dovoljena zaradi funkcionalnih razlogov.
Običajna uporaba vključuje povezavo z naslednjimi sistemi:
• ozemljitveni sistemi električnih inštalacij,
• ozemljitveni sistemi telekomunikacijskih sistemov,
• pomožna ozemljila zemljekostičnih odklopnikov pod napetostjo,
• železniško ozemljilo izmeničnih in enosmernih železnic,
• merilna ozemljila za laboratorije,
• inštalacije s sistemi katodne zaščite in blodečih tokov,
• servisni vhodni stebri za nizkonapetostne nadzemne kable,
• obvodne izolirane prirobnice in izolirani spojniki cevovodov.
Ta standard ne obravnava področij uporabe, kjer nastajajo sledilni tokovi.
OPOMBA: Elementi za zaščito pred strelo (LPSC) so lahko primerni tudi za uporabo v nevarnih razmerah, na primer v primeru požara ali v eksplozivnem ozračju. Pri namestitvi elementov v takih razmerah je treba poskrbeti, da so izpolnjene dodatne zahteve.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
1DGRPHãþD
SIST EN 62561-3:2012
(OHPHQWL]D]DãþLWRSUHGVWUHOR /36& GHO =DKWHYH]DL]RODFLMVNDLVNULãþD
Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating
spark gaps
Blitzschutzsystembauteile (LPSC) - Teil 3: Anforderungen an Trennfunkenstrecken
Composants des systèmes de protection contre la foudre (CSPF) - Partie 3: Exigences
pour les éclateurs d'isolement
Ta slovenski standard je istoveten z: EN 62561-3:2017
ICS:
29.080.99 Drugi standardi v zvezi z Other standards related to
izolacijo insulation
91.120.40 =DãþLWDSUHGVWUHOR Lightning protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62561-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2017
ICS 29.020; 91.120.40 Supersedes EN 62561-3:2012
English Version
Lightning Protection System Components (LPSC) - Part 3:
Requirements for isolating spark gaps (ISG)
(IEC 62561-3:2017)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 3: Anforderungen
(CSPF) - Partie 3: Exigences pour les éclateurs d'isolement an Trennfunkenstrecken
(IEC 62561-3:2017) (IEC 62561-3:2017)
This European Standard was approved by CENELEC on 2017-07-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62561-3:2017 E
European foreword
The text of document 81/561/FDIS, future edition 2 of IEC 62561-3, prepared by IEC/TC 81, "Lightning
protection", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
– latest date by which this document has to be (dop) 2018-04-20
implemented at national level
by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2020-07-20
with this document have to be withdrawn
This document supersedes EN 62561-3:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62561-3:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60529 NOTE Harmonized as EN 60529.
IEC 62305-3 NOTE Harmonized as EN 62305-3.
IEC 62305-4 NOTE Harmonized as EN 62305-4.
IEC 61643-11 NOTE Harmonized as EN 61643-11.
IEC 62305-1 NOTE Harmonized as EN 62305-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-52 1996 Environmental testing -- Part 2-52: Tests - EN 60068-2-52 1996
Test Kb: Salt mist, cyclic (sodium chloride
solution)
IEC 60068-2-75 1997 Environmental testing -- Part 2-75: Tests - EN 60068-2-75 1997
Test Eh: Hammer tests
IEC 62561-1 - Lightning protection system components EN 62561-1 -
(LPSC) – Part 1: Requirements for
connection components
ISO 4892-2 2006 Plastics - Methods of exposure to - -
laboratory light sources - Part-2: Xenon-arc
lamps
ISO 4892-3 2006 Plastics - Methods of exposure to- -
laboratory light sources - Part 3:
Fluorescent UV lamps
ISO 4892-4 - Plastics - Methods of exposure to - -
laboratory light sources – Part 4: Open-
flame carbon-arc lamps
ISO 6957 - Copper alloys -- Ammonia test for stress - -
corrosion resistance
ISO 6988 1985 Metallic and other non-organic coatings - EN ISO 6988 1994
Sulfur dioxide test with general
condensation of moisture
IEC 62561-3 ®
Edition 2.0 2017-06
INTERNATIONAL
STANDARD
Lightning protection system components (LPSC) –
Part 3: Requirements for isolating spark gaps (ISG)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 91.120.40 ISBN 978-2-8322-4455-5
– 2 – IEC 62561-3:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Classification . 9
4.1 According to ISGs capability to withstand lightning current . 9
4.2 According to ISGs location installation . 9
5 Requirements . 10
5.1 General . 10
5.2 Environmental requirements . 10
5.3 Installation instructions . 10
5.4 Lightning current carrying capability . 10
5.5 Rated impulse sparkover voltage . 10
5.6 Rated withstand voltage . 10
5.6.1 Rated DC withstand voltage . 10
5.6.2 Rated power frequency withstand voltage . 10
5.7 Isolation resistance . 10
5.8 Marking . 11
5.9 UV (ultraviolet) resistance . 11
6 Tests . 11
6.1 General conditions for tests . 11
6.2 UV (ultraviolet) light test . 12
6.3 Resistance tests to corrosion . 12
6.4 Mechanical tests . 12
6.5 Electrical tests . 14
6.5.1 Isolation resistance . 14
6.5.2 Withstand voltage . 14
6.5.3 Rated impulse sparkover voltage . 15
6.5.4 Lightning current . 15
6.6 Installation instructions . 16
6.6.1 General conditions for tests . 16
6.6.2 Acceptance criteria . 16
6.7 Marking test . 16
6.7.1 General conditions for tests . 16
6.7.2 Acceptance criteria . 16
7 Electromagnetic compatibility (EMC) . 16
8 Structure and content of the test report . 16
8.1 General . 16
8.2 Report identification . 17
8.3 Specimen description . 17
8.4 Standards and references . 17
8.5 Test procedure . 17
8.6 Testing equipment description . 18
8.7 Measuring instruments description . 18
8.8 Results and parameters recorded . 18
IEC 62561-3:2017 © IEC 2017 – 3 –
8.9 Statement of pass/fail . 18
Annex A (normative) Flow chart of tests . 19
Annex B (normative) Environmental test for isolating spark gaps . 21
B.1 General . 21
B.2 Salt mist treatment . 21
B.3 Humid sulphurous atmosphere treatment . 21
B.4 Ammonia atmosphere treatment. 21
Annex C (normative) Environmental test for outdoor isolating spark gaps –
Resistance to ultraviolet light . 22
C.1 General . 22
C.2 The tests . 22
C.3 First alternative test to C.2 . 22
C.4 Second alternative test to C.2 . 22
Bibliography . 23
Figure 1 – Pendulum hammer test apparatus . 13
Figure A.1 – Flow chart of the sequence of tests for ISGs . 20
Table 1 – Lightning impulse current (I ) parameters . 15
imp
– 4 – IEC 62561-3:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
________
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.