iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60336:2021/AC:2022-07

(Corrigendum)

Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics

Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics

IEC Corrected version

Medizinische elektrische Geräte - Röntgenstrahler für medizinische Diagnostik - Abmessungen von Brennflecken und zugehörige Kennwerte

Appareils électromédicaux - Gaines équipées pour diagnostic médical - Dimensions des foyers et caractéristiques connexes

Medicinska električna oprema - Rentgenske naprave za medicinsko diagnostiko - Mere žariščnih točk in s tem povezane značilnosti - Popravek AC (IEC 60336:2020/COR1:2022)

Popravek k standardu SIST EN IEC 60336:2021.
Standard IEC 60336:2020 se uporablja za ŽARIŠČNE TOČKE v RENTGENSKIH NAPRAVAH za medicinsko diagnostiko, ki delujejo pri NAPETOSTIH RENTGENSKE CEVI do vključno 150 kV.
Ta dokument opisuje preskusne metode z uporabo digitalnih detektorjev za določanje:
a) mer ŽARIŠČNIH TOČK v smislu NOMINALNIH VREDNOSTI ŽARIŠČNIH TOČK, v razponu od 0,1 do 3,0;
b) FUNKCIJ LINIJSKE RAZPRŠITVE;
c) enodimenzionalnih FUNKCIJ PRENOSA MODULACIJE;
d) TOČKASTIH RADIOGRAMOV ŽARIŠČNE TOČKE;
ter sredstva za potrjevanje skladnosti.
V informativnih dodatkih sta opisana slikanje z ZVEZDASTIM VZORCEM in VRŠNA VREDNOST.
Standard IEC 60336:2020 razveljavlja in nadomešča četrto izdajo, objavljeno leta 2005. Ta izdaja je tehnično popravljena izdaja.
Pomembne spremembe pete izdaje glede na predhodno različico so navedene v točki E.6. Te spremembe so:
a) vključitev digitalnih detektorjev in napak diskretizacije;
b) manj normativnih zahtev;
c) podpora tako za TRAKOVNO KAMERO kot KAMERO S TOČKASTO ODPRTINO;
d) ponovna vključitev popačene (izkrivljene) ŽARIŠČNE TOČKE;
e) ohranitev ZVEZDASTIH VZORCEV in VRŠNE VREDNOSTI za informativne namene.

General Information

Status
Published
Publication Date
14-Jul-2022
ICS
11.040.50 - Radiographic equipment
Technical Committee
CLC/TC 62 - Electrical equipment in medical practice
Drafting Committee
CLC/TC 62 - Electrical equipment in medical practice
Current Stage
6060 - Document made available - Publishing
Start Date
15-Jul-2022
Completion Date
15-Jul-2022
Ref Project
SIST EN IEC 60336:2021/AC:2022 - Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics (IEC 60336:2020/COR1:2022)

Relations

Corrects
EN IEC 60336:2021 - Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics
Effective Date
12-Jul-2022

Buy Standard

EN IEC 60336:2021/AC:2022EN IEC 60336:2021/AC:2022
PreviousNext
Corrigendum
EN IEC 60336:2021/AC:2022
English and French language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60336:2021/AC:2022
01-oktober-2022
Medicinska električna oprema - Rentgenske naprave za medicinsko diagnostiko -
Mere žariščnih točk in s tem povezane značilnosti - Popravek AC (IEC
60336:2020/COR1:2022)
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot
dimensions and related characteristics (IEC 60336:2020/COR1:2022)
Medizinische elektrische Geräte - Röntgenstrahler für medizinische Diagnostik -
Kennwerte von Brennflecken (IEC 60336:2020/COR1:2022)
Appareils électromédicaux - Gaines équipées pour diagnostic médical - Dimensions des
foyers et caractéristiques connexes (IEC 60336:2020/COR1:2022)
Ta slovenski standard je istoveten z: EN IEC 60336:2021/AC:2022-07
ICS:
11.040.50 Radiografska oprema Radiographic equipment
SIST EN IEC 60336:2021/AC:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60336:2021/AC:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60336:2021/AC:2022


EUROPEAN STANDARD EN IEC 60336:2021/AC:2022-
07
NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2022

ICS 11.040.50
English Version
Medical electrical equipment - X-ray tube assemblies for medical
diagnosis - Focal spot dimensions and related characteristics
(IEC 60336:2020/COR1:2022)
Appareils électromédicaux - Gaines équipées pour Medizinische elektrische Geräte - Röntgenstrahler für
diagnostic médical - Dimensions des foyers et medizinische Diagnostik - Kennwerte von Brennflecken
caractéristiques connexes (IEC 60336:2020/COR1:2022)
(IEC 60336:2020/COR1:2022)
This corrigendum becomes effective on 15 July 2022 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60336:2021/AC:2022-07 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60336:2021/AC:2022
EN IEC 60336:2021/AC:2022-07



Endorsement notice

The text of the corrigendum IEC 60336:2020/COR1:2022 was approved by CENELEC as EN IEC 60336:2021/AC:2022-07 without any
modification.

---------------------- Page: 4 ----------------------
SIST EN IEC 60336:2021/AC:2022
IEC 60336:2020/COR1:2022 – 1 –
 IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________

IEC 60336 IEC 60336
Edition 5.0  2020-12 Édition 5.0  2020-12


Medical electrical equipment – X-ray tube Appareils électromédicaux – Gaines équipées
assemblies for medical diagnosis – pour diagnostic médical –
Focal spot
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61676:2023/AC:2024-02(Corrigendum)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of x-ray tube voltage in diagnostic radiology
SIST EN IEC 61676:2023/AC:2024
  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62220-2-1:2023(Main)
Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging
SIST EN IEC 62220-2-1:2024

IEC 62220-2-1:2023 describes the performance metrics associated with DUAL-ENERGY IMAGING capable DIGITAL X-RAY IMAGING DEVICES meant for medical applications and specifies the methods for their determination. These metrics can be used to analyse TISSUE-SUBTRACTED IMAGES and to evaluate dose performance, noise characteristics, and tissue-subtraction efficacy of DIGITAL X-RAY IMAGING DEVICES. The described methods indicate the procedures to obtain MULTI-SPECTRAL PRIMARY DATA and to compute their derived TISSUE-SUBTRACTED IMAGES. The intended users of this document are MANUFACTURERS and well-equipped test laboratories. This document is restricted to DIGITAL X-RAY IMAGING DEVICES that are used for single or multiple exposure dual-energy radiographic imaging based on, for example, CR systems, direct and indirect flat panel-detector based systems. This document excludes and is not applicable to: – DIGITAL X-RAY IMAGING DEVICES intended to be used in mammography or in dental RADIOGRAPHY; – slot scanning DIGITAL X-RAY IMAGING DEVICES; – COMPUTED TOMOGRAPHY or CONE-BEAM COMPUTED TOMOGRAPHY; – photon-energy discriminating devices such as photon counting X-RAY IMAGING DEVICES; – devices for dynamic imaging (where series of images are acquired, as in fluoroscopy or cardiac imaging). – DIGITAL X-RAY IMAGING DEVICES intended to be used with RADIOTHERAPY beams.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61676:2023(Main)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
SIST EN IEC 61676:2023

IEC 61676:2023 is available as IEC 61676:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61676:2023 specifies the performance requirements of instruments as used in the non-invasive measurement of X-RAY tube voltage up to 150 kV and the relevant compliance tests. This document also describes the method for calibration and gives guidance for estimating the uncertainty in measurements performed under conditions different from those during calibration. Applications for such measurement are found in diagnostic radiology including mammography, computed tomography (CT), dental radiology and radioscopy. This document is not concerned with the safety aspect of such instruments. The requirements for electrical safety applying to them are contained in IEC 61010-1. IEC 61676:2023 cancels and replaces first edition published in 2002, Amendment 1:2008. This edition constitutes a technical revision. It includes an assessment of the combined standard uncertainty for the performance of a hypothetical instrument for the non-invasive measurement of the tube high voltage (in Annex A) which replaces Annex A of the edition 1.1 titled "Recommended performance criteria for the invasive divider".

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 80601-2-59:2019/A1:2023(Amendment)
Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
SIST EN IEC 80601-2-59:2019/A1:2023

20211012-JO-Link to 93/42/EEC and M/295 removed

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60601-2-43:2023(Main)
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
SIST EN IEC 60601-2-43:2023

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of both FIXED and MOBILE X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES, hereafter referred to as INTERVENTIONAL X-RAY EQUIPMENT. Its scope excludes, in particular: - equipment for RADIOTHERAPY; - equipment for COMPUTED TOMOGRAPHY; - ACCESSORIES intended to be introduced into the PATIENT; - mammographic X-RAY EQUIPMENT; - dental X-RAY EQUIPMENT. NOTE 1 Examples of RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES, for which the use of INTERVENTIONAL X-RAY EQUIPMENT complying with this standard is recommended, are given in Annex AA. NOTE 2 Specific requirements for magnetic navigation devices, and for the use of INTERVENTIONAL X-RAY EQUIPMENT in an operating room environment were not considered in this particular standard; therefore no specific requirements have been developed for these devices or uses. In any case, such devices or uses remain under the general clause requirements. NOTE 3 INTERVENTIONAL X-RAY EQUIPMENT, when used for cone-beam CT mode, is covered by this standard and not by IEC 60601-2-44 [2]2. No additional requirements for operation in cone-beam CT mode were identified for this standard (see also Note 4 in 203.6.4.5). INTERVENTIONAL X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES, which does not include a PATIENT SUPPORT as part of the system, is exempt from the PATIENT SUPPORT provisions of this standard. If a clause or subclause is specifically intended to be applicable to INTERVENTIONAL X-RAY EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to INTERVENTIONAL X-RAY EQUIPMENT and to ME SYSTEMS, as relevant. NOTE 4 See also 4.2 of the general standard. The subclauses of this standard supersede IEC 60601-2-54 subclauses. IEC 60601-2-54 applies only with regards to the cited subclauses; non-cited subclauses of IEC 60601-2-54 do not apply.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60806:2023(Main)
Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis
SIST EN IEC 60806:2023

This International Standard is applicable to X-RAY SOURCE ASSEMBLIES and X-RAY TUBE ASSEMBLIES, for use in MEDICAL DIAGNOSTIC RADIOLOGY for techniques in which the X-RAY PATTERN will be received simultaneously in all points of the IMAGE RECEPTION AREA. This standard specifies a method for the determination of the greatest geometrically symmetrical RADIATION FIELD at a specified distance from the FOCAL SPOT for which the percentage AIR KERMA RATE along the major axes of the RADIATION FIELD does not fall below a permitted value. NOTE 1 AIR KERMA or AIR KERMA RATE are the only practical verifiable physical quantities for X-RAY SOURCES. X-RAY SOURCES must be tested independently from MEDICAL ELECTRICAL SYSTEMS. Conversion to the characteristics of the X-RAY IMAGE RECEPTOR used in a MEDICAL ELECTRICAL SYSTEM may be done in addition. In case multiple FOCAL SPOTS are not super-imposed, each focal spot has its own REFERENCE AXIS. Then the maximum RADIATION FIELD may be given for each FOCAL SPOT separately NOTE 2 The maximum symmetrical RADIATION FIELD may change from its initial value as the X-RAY TUBE ages through use. NOTE 3 If, for certain MEDICAL ELECTRICAL SYSTEMs the scope of IEC 60806 does not fit, then the special RADIATION FIELD requirements could be incorporated in the MEDICAL ELECTRICAL SYSTEM particular standard. However, a statement on the RADIATION FIELD while referring IEC 60806 is then no longer possible.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60731:2012/A1:2022(Amendment)
Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy
SIST EN 60731:2012/A1:2022

NEXT ACTION: PUBLICATION EXPECTED BY 2019-10-31
2019-07-04 IP: BT decision D163/C033 - remove link to MDD  
NEXT ACTION: TB Action by 21-22 May 2019 i.e. Next CLC TC 62 Plenary Meeting
2019-01-24: JO - In contact with CLC TC 62 secretary to know if an annex ZZ is expected or if a CIB will be launched to decouple this standard from the harmonization process.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62985:2019/AC:2022-07(Corrigendum)
Methods for calculating size specific dose estimates (SSDE) for computed tomography
SIST EN IEC 62985:2020/AC:2022

IEC Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61223-3-5:2019/AC:2022-07(Corrigendum)
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance and constancy tests - Imaging performance of computed tomography X-ray equipment
SIST EN IEC 61223-3-5:2020/AC:2022

IEC Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61675-1:2022(Main)
Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
SIST EN IEC 61675-1:2022

IEC 61675-1:2022 specifies terminology and test methods for declaring the characteristics of POSITRON EMISSION TOMOGRAPHS. POSITRON EMISSION TOMOGRAPHS detect the ANNIHILATION RADIATION of positron emitting RADIONUCLIDES by COINCIDENCE DETECTION.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day