EN IEC 62769-115-2:2020
(Main)Field device integration (FDI) - Part 115-2: Profiles - Modbus-RTU
Field device integration (FDI) - Part 115-2: Profiles - Modbus-RTU
IEC 62769-115-2:2020 defines the protocol-specific definitions (PSDs) as defined in IEC 62769-7 on generic protocol extensions for the Modbus® -RTU protocol in accordance with CPF 15 in IEC 61784 2.
Feldgeräteintegration (FDI) - Teil 115-2: Profile - Modbus-RTU
Intégration des appareils de terrain (FDI) - Partie 115-2: Profils - Modbus-RTU
L'IEC 62769-115-2:2020 spécifie les définitions spécifiques au protocole (PSD – Protocol Specific Definition) telles que définies dans l'IEC 62769-7 relative aux extensions de protocole générique pour le protocole Modbus® -RTU conformément au CPF 15 de l'IEC 61784-2.
Vključitev procesne terenske naprave (FDI) - 115-2. del: Profili - Modbus-RTU (IEC 62769-115-2:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62769-115-2:2021
01-februar-2021
Vključitev procesne terenske naprave (FDI) - 115-2. del: Profili - Modbus- RTU (IEC
62769-115-2:2020)
Field device integration (FDI) – Part 115-2: Profiles – Modbus-RTU (IEC 62769-115-
2:2020)
Feldgeräteintegration (FDI) - Teil 115-2: Profile - Modbus-RTU (IEC 62769-115-2:2020)
Intégration des appareils de terrain (FDI) - Partie 115-2: Profils - Modbus-RTU (IEC
62769-115-2:2020)
Ta slovenski standard je istoveten z: EN IEC 62769-115-2:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62769-115-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62769-115-2:2021
---------------------- Page: 2 ----------------------
SIST EN 62769-115-2:2021
EUROPEAN STANDARD EN IEC 62769-115-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 25.040.40; 35.100.05
English Version
Field device integration (FDI) - Part 115-2: Profiles - Modbus-
RTU
(IEC 62769-115-2:2020)
Intégration des appareils de terrain (FDI) - Partie 115-2: Feldgeräteintegration (FDI) - Teil 115-2: Profile - Modbus-
Profils - Modbus-RTU RTU
(IEC 62769-115-2:2020) (IEC 62769-115-2:2020)
This European Standard was approved by CENELEC on 2020-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-115-2:2020 E
---------------------- Page: 3 ----------------------
SIST EN 62769-115-2:2021
EN IEC 62769-115-2:2020 (E)
European foreword
The text of document 65E/740/FDIS, future edition 1 of IEC 62769-115-2, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-115-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-115-2:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61784-2 NOTE Harmonized as EN IEC 61784-2
IEC 61804 (series) NOTE Harmonized as EN IEC 61804 (series)
2
---------------------- Page: 4 ----------------------
SIST EN 62769-115-2:2021
EN IEC 62769-115-2:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD
...
SLOVENSKI STANDARD
SIST EN IEC 62769-115-2:2021
01-februar-2021
Vključitev procesne terenske naprave (FDI) - 115-2. del: Profili - Modbus-RTU (IEC
62769-115-2:2020)
Field device integration (FDI) – Part 115-2: Profiles – Modbus-RTU (IEC 62769-115-
2:2020)
Feldgeräteintegration (FDI) - Teil 115-2: Profile - Modbus-RTU (IEC 62769-115-2:2020)
Intégration des appareils de terrain (FDI) - Partie 115-2: Profils - Modbus-RTU (IEC
62769-115-2:2020)
Ta slovenski standard je istoveten z: EN IEC 62769-115-2:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62769-115-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62769-115-2:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 62769-115-2:2021
EUROPEAN STANDARD EN IEC 62769-115-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 25.040.40; 35.100.05
English Version
Field device integration (FDI) - Part 115-2: Profiles - Modbus-
RTU
(IEC 62769-115-2:2020)
Intégration des appareils de terrain (FDI) - Partie 115-2: Feldgeräteintegration (FDI) - Teil 115-2: Profile - Modbus-
Profils - Modbus-RTU RTU
(IEC 62769-115-2:2020) (IEC 62769-115-2:2020)
This European Standard was approved by CENELEC on 2020-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-115-2:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62769-115-2:2021
EN IEC 62769-115-2:2020 (E)
European foreword
The text of document 65E/740/FDIS, future edition 1 of IEC 62769-115-2, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-115-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-115-2:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61784-2 NOTE Harmonized as EN IEC 61784-2
IEC 61804 (series) NOTE Harmonized as EN IEC 61804 (series)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62769-115-2:2021
EN IEC 62769-115-2:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.