ISO/IEC 14908-1:2012
(Main)Information technology -- Control network protocol -- Part 1: Protocol stack
Information technology -- Control network protocol -- Part 1: Protocol stack
ISO/IEC 14908-1:2012 specifies a communication protocol for local area control networks. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. ISO/IEC 14908-1:2012 describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the Medium Access Control (MAC) sublayer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in ISO/IEC 14908-1:2012 supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.
General Information
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14908-1
First edition
2012-11-01
Information technology — Control
network protocol —
Part 1:
Protocol stack
Technologies de l'information — Protocole de réseau de contrôle —
Partie 1: Pile de protocole
Reference number
ISO/IEC 14908-1:2012(E)
©
ISO/IEC 2012
---------------------- Page: 1 ----------------------
ISO/IEC 14908-1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2012 — All rights reserved
---------------------- Page: 2 ----------------------
- 1 - 14908-1 © ISO/IEC:2012 (E)
Contents page
Foreword . 7
Introduction . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 Symbols and abbreviations . 11
4.1 Symbols and graphical representations . 11
4.2 Abbreviations . 12
5 Overview of protocol layering . 13
6 MAC sublayer . 15
6.1 Service provided . 15
6.2 Interface to the link layer . 15
6.3 Interface to the physical layer . 16
6.4 MPDU format . 17
6.5 Predictive p-persistent CSMA — overview description . 17
6.6 Idle channel detection . 18
6.7 Randomising . 19
6.8 Backlog estimation . 19
6.9 Optional priority . 20
6.10 Optional collision detection . 21
6.11 Beta1, Beta2 and Preamble Timings . 21
7 Link layer . 23
7.1 Assumptions . 23
7.2 Service provided . 24
7.3 CRC . 24
7.4 Transmit algorithm . 25
8 Network layer . 26
8.1 Assumptions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.