ISO/IEC 29145-3:2014
(Main)Information technology - Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless home network services - Part 3: NWK layer
Information technology - Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless home network services - Part 3: NWK layer
ISO/IEC 29145-3:2014(E) specifies the network layer (NWK) of the WiBEEM (Wireless Beacon-enabled Energy Efficient Mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.
General Information
Standards Content (Sample)
ISO/IEC 29145-3
Edition 1.0 2014-03
INTERNATIONAL
STANDARD
Information technology – Wireless beacon-enabled energy efficient mesh
network (WiBEEM) for wireless home network services –
Part 3: NWK layer
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
ISO/IEC 29145-3
Edition 1.0 2014-03
INTERNATIONAL
STANDARD
Information technology – Wireless beacon-enabled energy efficient mesh
network (WiBEEM) for wireless home network services –
Part 3: NWK layer
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
P
ICS 35.200 ISBN 978-2-8322-1450-3
– 2 – ISO/IEC 29145-3 © ISO/IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Abbreviations . 7
3.3 Conventions . 8
4 Conformance . 8
5 Overview of the WiBEEM technology . 8
6 NWK layer specifications . 8
6.1 General . 8
6.2 NWK layer service specifications . 8
6.2.1 Overview . 8
6.2.2 NWK data service . 9
6.2.3 NWK management service . 12
6.2.4 Network formation . 14
6.2.5 Allowing devices to join . 16
6.2.6 Begin as a router . 18
6.2.7 Joining a network . 19
6.2.8 Joining a device directly to a network . 22
6.2.9 Leaving a network . 24
6.2.10 Resetting a device . 26
6.2.11 Receiver synchronisation . 27
6.2.12 Information base maintenance . 30
Bibliography . 34
Figure 1 – NWK layer structure . 9
Figure 2 – Message sequence chart for resetting the network layer . 27
Figure 3 – Message sequence chart for synchronising in a non-beaconing network . 30
Table 1 – NLDE-DATA.request parameters . 10
Table 2 – NLDE-DATA.confirm parameters . 11
Table 3 – NLDE-DATA.indication parameters . 12
Table 4 – Summary of primitives used by NWK layer . 12
Table 5 – NLME-NETWORK-DISCOVERY.request parameters . 13
Table 6 – NLME-WiBEEM-DISCOVERY.confirm paramters . 14
Table 7 – Network descriptor information fields . 14
Table 8 – NLME-WRC-OPERATING.request parameters . 15
Table 9 – NLME-NETWORK-FORMATION.confirm parameters . 16
Table 10 – NLME-ALLOW-JOINING.request . 17
Table 11 – NLME-ALLOW-JOINING.confirm parameters . 17
ISO/IEC 29145-3 © ISO/IEC 2014 – 3 –
Table 12 – NLME-SET-SUPERFRAME.request parameters . 18
Table 13 – NLME-SET-SUPERFRAME.confirm parameters . 19
Table 14 – NLME-JOIN.request parameters . 20
Table 15 – NLME-JOIN.indication parameters . 21
Table 16 – NLME-JOIN.confirm parameters . 22
Table 17 – NLME-DETERMINED-JOIN.request parameters . 22
Table 18 – Capability information parameter format . 23
Table 19 – NLME-DETERMINED-JOIN.confirm parameters . 23
Table 20 – NLME-LEAVE.request parameters . 24
Table 21 – NLME-LEAVE.indication parameters . 25
Table 22 – NLME-LEAVE.confirm parameters . 25
Table 23 – NLME-RESET.confirm parameters . 27
Table 24 – NLME-SYNC.request parameters . 28
Table 25 – NLME-SYNC.confirm parameters . 29
Table 26 – NLME-READ-NIB.request parameters . 30
Table 27 – NLME-READ-NIB.confirm parameters . 31
Table 28 – NLME-WRITE-NIB.request parameters . 32
Table 29 – NLME-WRITE-NIB.confirm parameters . 33
– 4 – ISO/IEC 29145-3 © ISO/IEC 2014
INFORMATION TECHNOLOGY –
WIRELESS BEACON-ENABLED ENERGY EFFICIENT MESH
NETWORK (WIBEEM) FOR WIRELESS HOME NETWORK SERVICES –
Part 3: NWK layer
FOREWORD
1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form the
specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in
the development of International Standards. Their preparation is entrusted to technical committees; any ISO and
IEC member body interested in the subject dealt with may participate in this preparatory work. International
governmental and non-governmental organizations liaising with ISO and IEC also participate in this preparation.
2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
3) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO member bodies.
4) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted
by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the
technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held responsible for
the way in which they are used or for any misinterpretation by any end user.
5) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and
ISO/IEC publications transparently to the maximum extent possible in their national and regional publications.
Any divergence between any ISO/IEC publication and the corresponding national or regional publication
should be clearly indicated in the latter.
6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for
any equipment declared to be in conformity with an ISO/IEC publication.
7) All users should ensure that they have the latest edition of this publication.
8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts
and members of their technical committees and IEC or ISO member bodies for any personal injury, property
damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees)
and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or any other IEC,
ISO or ISO/IEC publications.
9) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
10) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 29145-3 was prepared by subcommittee 25: Interconnection
of information technology equipment, of ISO/IEC joint technical committee 1: Information
technology.
The list of all currently available parts of the ISO/IEC 29145 series, under the general title
Information technology – Wireless beacon-enabled energy efficient mesh network (WiBEEM)
for wireless home network services, can be found on the IEC web site.
This International Standard has been approved by vote of the member bodies, and the voting
results may be obtained from the address given on the second title page.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
ISO/IEC 29145-3 © ISO/IEC 2014 – 5 –
INTRODUCTION
This International Standard specifies the WiBEEM (Wireless Beacon-enabled Energy Efficient
Mesh network) protocol, which provides low-power-consuming mesh network functions by
enabling the “beacon mode operation”. WiBEEM is based on the IEEE 802.15.4 standard with
additional upper layer protocols and a specific usage of the MAC layer prot
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.