iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

ISO/IEC 14908-4:2012

(Main)

Information technology -- Control network protocol -- Part 4: IP communication

Information technology -- Control network protocol -- Part 4: IP communication

ISO/IEC 14908-4:2011 specifies the transporting of the Control Network Protocol (CNP) packets for commercial local area control networks over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of ISO/IEC 14908-4:2011 is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP.

General Information

Status
Published
Publication Date
13-Feb-2012
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
35.200 - Interface and interconnection equipment
35.240.99 - IT applications in other fields
Technical Committee
ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
Current Stage
CAN - Draft cancelled
Start Date
15-Dec-2011
Completion Date
22-Nov-2011
Ref Project

Buy Standard

ISO/IEC 14908-4:2012 - Information technology -- Control network protocol -- Part 4: IP communicationISO/IEC 14908-4:2012 - Information technology -- Control network protocol -- Part 4: IP communication
PreviousNext
Standard
ISO/IEC 14908-4:2012 - Information technology -- Control network protocol -- Part 4: IP communication
English language
52 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 14908-4
First edition
2012-02-15


Information technology — Control
network protocol —
Part 4:
IP communication
Technologies de l'information — Protocole de réseau de contrôle —
Partie 4: Communication IP





Reference number
ISO/IEC 14908-4:2012(E)
©
ISO/IEC 2012

---------------------- Page: 1 ----------------------
ISO/IEC 14908-4:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 — All rights reserved

---------------------- Page: 2 ----------------------
- 2 - 14908-4 © ISO/IEC:201 (E)
Contents
Page
FOREWORD .4
Introduction.5
1 Scope.7
2 Normative references .8
3 Terms, definitions and abbreviations.8
3.1 Terms and definitions.8
3.2 Abbreviations.9
4 Requirements.9
5 CNP/IP device specification .10
5.1 IP Related device specifications.10
5.2 CNP related device specifications.10
6 IP channel.11
6.1 Specification.11
6.2 IP transport mechanisms .13
7 CNP/IP device.14
7.1 Configuration of a CNP/IP device .14
7.2 Configuration parameters .14
7.3 Configuration techniques.16
8 CNP/IP messages.17
8.1 Definition of CNP/IP messages and modes of operation.17
8.2 Common message header .18
8.3 Packet segmentation .19
8.4 Data packet exchange .22
8.5 Configuration server interactions.24
8.6 Miscellaneous Status Messages.32
8.7 Vendor Specific Messages.36
8.8 Authentication of CNP Packets.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
ISO/IEC 14908-1:2012(Main)
Information technology -- Control network protocol -- Part 1: Protocol stack

ISO/IEC 14908-1:2012 specifies a communication protocol for local area control networks. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. ISO/IEC 14908-1:2012 describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the Medium Access Control (MAC) sublayer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in ISO/IEC 14908-1:2012 supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    420 pages
    English language
    sale 15% off
IEC
ISO/IEC 14908-3:2012(Main)
Information technology -- Control network protocol -- Part 3: Power line channel specification

ISO/IEC 14908-3:2011 specifies the control network Power Line (PL) channel and serves as a companion document to ISO/IEC 14908-1. It presents the information necessary for the development of a PL physical network and nodes to communicate and share information over that network.
ISO/IEC 14908-3:2011 covers the complete physical layer (OSI layer 1) including the interface to the Medium Access Control (MAC) sublayer and the interface to the medium. It includes parameters specific to the PL channel type, even though the parameters may be controlled at an OSI layer other than layer 1. ISO/IEC 14908-3:2011 also provides a set of guideline physical and electrical specifications for the power line environment as an aid in developing products for that environment.

  • Standard
    13 pages
    English language
    sale 15% off
IEC
ISO/IEC 14908-2:2012(Main)
Information technology -- Control network protocol -- Part 2: Twisted pair communication

ISO/IEC 14908-2:2011 specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in local area control networks and is used in conjunction with ISO/IEC 14908-1. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply and application electronics.
ISO/IEC 14908-2:2011 covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sublayer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    16 pages
    English language
    sale 15% off
IEC
ISO/IEC 14908-1:2012(Main)
Information technology -- Control network protocol -- Part 1: Protocol stack

ISO/IEC 14908-1:2012 specifies a communication protocol for local area control networks. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. ISO/IEC 14908-1:2012 describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the Medium Access Control (MAC) sublayer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in ISO/IEC 14908-1:2012 supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    420 pages
    English language
    sale 15% off
IEC
ISO/IEC 14908-3:2012(Main)
Information technology -- Control network protocol -- Part 3: Power line channel specification

ISO/IEC 14908-3:2011 specifies the control network Power Line (PL) channel and serves as a companion document to ISO/IEC 14908-1. It presents the information necessary for the development of a PL physical network and nodes to communicate and share information over that network.
ISO/IEC 14908-3:2011 covers the complete physical layer (OSI layer 1) including the interface to the Medium Access Control (MAC) sublayer and the interface to the medium. It includes parameters specific to the PL channel type, even though the parameters may be controlled at an OSI layer other than layer 1. ISO/IEC 14908-3:2011 also provides a set of guideline physical and electrical specifications for the power line environment as an aid in developing products for that environment.

  • Standard
    13 pages
    English language
    sale 15% off
IEC
ISO/IEC 14908-2:2012(Main)
Information technology -- Control network protocol -- Part 2: Twisted pair communication

ISO/IEC 14908-2:2011 specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in local area control networks and is used in conjunction with ISO/IEC 14908-1. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply and application electronics.
ISO/IEC 14908-2:2011 covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sublayer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    16 pages
    English language
    sale 15% off
IEC
ISO/IEC TR 29107-1:2010(Main)
Information technology - Intelligent homes - Taxonomy of specifications - Part 1: Taxonomy method

The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) website.
ISO/IEC 29107-1:2010 specifies the concept for a taxonomy of standards and other related specifications applicable to intelligent homes. It is intended for the classification of specifications from ISO, IEC, ISO/IEC JTC 1, ITU and from organizations with liaison status with any of these. It is intended to the various standardisation bodies that are contributing to the intelligent home. With the help of the concept described in this report they should be able to classify their specifications. This will benefit the standardisation bodies to determine if there are overlapping specifications or areas for which specifications are missing.

  • Technical report
    31 pages
    English language
    sale 15% off
IEC
ISO/IEC 15045-1:2004(Main)
Information technology - Home electronic system (HES) gateway - Part 1: A residential gateway model for HES

The Residential Gateway (RG) is a device of the Home Electronic System (HES) that connects home network domains to network domains outside the house. It supports communications among devices within the premises, and among systems, service providers, operators and users outside the premises. The RG enables service and content providers to deliver services such as entertainment, video and broadband digital streams, monitoring for health care, security and occupancy, home appliance control and preventive maintenance, remote metering, and energy management. The RG specified by this standard does not imply the use of any particular protocol such as IP and it is recognised that many forms of the RG will exist using many types of data such as analogue video and broadband digital streams.

  • Standard
    29 pages
    English language
    sale 15% off
IEC
IEC 62286:2003(Main)
Service diagnostic interface for consumer electronics products and networks - Implementation for IEEE 1394

specifies the requirements that have to be implemented in future products that incorporate a digital interface, and service diagnostic software developed for these products. The Service Diagnostic Interface (SDI) requires the use of a PC (desktop or laptop) into which service diagnostic software can be loaded. A part of this PC software has to be standardised while another part of this PC software is manufacturer/product related.

  • Standard
    19 pages
    English language
    sale 15% off
IEC
IEC 62386-104:2019/AMD1:2023(Amendment)
Amendment 1 - Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components
  • Standard
    6 pages
    English and French language
    sale 15% off