Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors

IEC 60384-23:2015 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. This edition includes the following significant technical changes with respect to the previous edition:
a) Revised all parts of the document based on the ISO/IEC Directives, Part 2:2011 (sixth edition) and harmonization between other similar kinds of documents.
b) Revised tables and Clause 4 so as to prevent duplications and contradictions.

Condensateurs fixes utilisés dans les équipements électroniques - Partie 23: Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polynaphtalate d'éthylène métallisé

L'IEC 60384-23:2015 s'applique aux condensateurs fixes pour courant continu à électrodes métallisées et à diélectrique en polynaphtalate d'éthylène destinés aux équipements électroniques. Ces condensateurs sont équipés de contacts de connexion métallisés ou de bandes de brasure et sont destinés à être montés directement sur des substrats pour circuits hybrides ou sur des cartes imprimées. Ces condensateurs peuvent avoir des propriétés d'autorégénération en fonction des conditions d'utilisation. Ils sont principalement destinés à des applications dans lesquelles la composante alternative est petite par rapport à la tension assignée. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) Révision de toutes les parties du document en se basant sur les Directives ISO/IEC, Partie 2:2011 (sixième édition) et sur l'harmonisation d'autres types de documents similaires.
b) Révision des tableaux et de l'Article 4 pour éviter les duplications et les contradictions.

General Information

Status
Published
Publication Date
28-Apr-2015
Current Stage
PPUB - Publication issued
Start Date
29-Apr-2015
Completion Date
29-Apr-2015
Ref Project

Buy Standard

Standard
IEC 60384-23:2015 - Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors
English and French language
61 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

IEC 60384-23
Edition 2.0 2015-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fixed capacitors for use in electronic equipment –

Part 23: Sectional specification – Fixed metallized polyethylene naphthalate film

dielectric surface mount d.c. capacitors
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 23: Spécification intermédiaire – Condensateurs fixes pour montage en
surface pour courant continu à diélectrique en film de polynaphtalate d'éthylène
métallisé
IEC 60384-23:2015-04(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2015 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite

ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org

The stand-alone application for consulting the entire The world's leading online dictionary of electronic and

bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and

Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15

documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International

iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary

The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in

variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions

committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries

and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc

details all new publications released. Available online and If you wish to give us your feedback on this publication or

also once a month by email. need further assistance, please contact the Customer Service

Centre: csc@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 60 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC

en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et

comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus

projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just

Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette

Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:

csc@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60384-23
Edition 2.0 2015-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fixed capacitors for use in electronic equipment –

Part 23: Sectional specification – Fixed metallized polyethylene naphthalate film

dielectric surface mount d.c. capacitors
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 23: Spécification intermédiaire – Condensateurs fixes pour montage en
surface pour courant continu à diélectrique en film de polynaphtalate d'éthylène
métallisé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.10 ISBN 978-2-8322-2647-6

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– 2 – IEC 60384-23:2015  IEC 2015
CONTENTS

FOREWORD ........................................................................................................................... 5

1 General ........................................................................................................................... 7

1.1 Scope ..................................................................................................................... 7

1.2 Object ..................................................................................................................... 7

1.3 Normative references .............................................................................................. 7

1.4 Information to be given in a detail specification ....................................................... 7

1.4.1 General ........................................................................................................... 7

1.4.2 Outline drawing and dimensions ...................................................................... 8

1.4.3 Mounting ......................................................................................................... 8

1.4.4 Ratings and characteristics .............................................................................. 8

1.4.5 Marking ........................................................................................................... 9

1.5 Terms and definitions .............................................................................................. 9

1.6 Marking ................................................................................................................... 9

1.6.1 General ........................................................................................................... 9

1.6.2 Information for marking .................................................................................... 9

1.6.3 Marking of capacitors ...................................................................................... 9

1.6.4 Marking on packaging .................................................................................... 10

2 Preferred ratings and characteristics ............................................................................. 10

2.1 Preferred characteristics ....................................................................................... 10

2.1.1 Preferred climatic categories ......................................................................... 10

2.2 Preferred values of ratings .................................................................................... 10

2.2.1 Nominal capacitance (C ) ............................................................................. 10

2.2.2 Tolerance on nominal capacitance ................................................................. 10

2.2.3 Rated voltage (U ) ........................................................................................ 10

2.2.4 Category voltage (U ) ................................................................................... 11

2.2.5 Rated temperature ......................................................................................... 11

3 Quality assessment procedures ..................................................................................... 11

3.1 Primary stage of manufacture ............................................................................... 11

3.2 Structurally similar components ............................................................................ 11

3.3 Certified test records of released lots .................................................................... 11

3.4 Qualification approval procedures ......................................................................... 11

3.4.1 General ......................................................................................................... 11

3.4.2 Qualification approval on the basis of the fixed sample size procedure .......... 12

3.5 Quality conformance inspection ............................................................................ 19

3.5.1 Formation of inspection lots ........................................................................... 19

3.5.2 Test schedule ................................................................................................ 20

3.5.3 Delayed delivery ............................................................................................ 20

3.5.4 Assessment levels ......................................................................................... 20

4 Test and measurement procedures ................................................................................ 21

4.1 Mounting ............................................................................................................... 21

4.2 Visual examination and check of dimensions ........................................................ 21

4.2.1 General ......................................................................................................... 21

4.2.2 Visual examination and check of dimensions ................................................. 21

4.2.3 Requirements ................................................................................................ 21

4.3 Electrical tests ...................................................................................................... 21

4.3.1 Voltage proof ................................................................................................. 21

---------------------- Page: 4 ----------------------
IEC 60384-23:2015  IEC 2015 – 3 –

4.3.2 Capacitance .................................................................................................. 22

4.3.3 Tangent of loss angle (tan δ) ......................................................................... 22

4.3.4 Insulation resistance ...................................................................................... 23

4.4 Shear test ............................................................................................................. 24

4.5 Substrate bending test .......................................................................................... 24

4.5.1 General ......................................................................................................... 24

4.5.2 Initial measurement ....................................................................................... 24

4.5.3 Final inspections and requirements ................................................................ 24

4.6 Resistance to soldering heat ................................................................................. 25

4.6.1 General ......................................................................................................... 25

4.6.2 Initial inspections ........................................................................................... 25

4.6.3 Test conditions .............................................................................................. 25

4.6.4 Recovery ....................................................................................................... 25

4.6.5 Final inspections and requirements ................................................................ 25

4.7 Solderability .......................................................................................................... 25

4.7.1 General ......................................................................................................... 25

4.7.2 Test conditions .............................................................................................. 25

4.7.3 Final inspections and requirements ................................................................ 25

4.8 Rapid change of temperature ................................................................................ 25

4.8.1 General ......................................................................................................... 25

4.8.2 Initial inspections ........................................................................................... 26

4.8.3 Test conditions .............................................................................................. 26

4.8.4 Final inspections and requirements ................................................................ 26

4.9 Climatic sequence................................................................................................. 26

4.9.1 General ......................................................................................................... 26

4.9.2 Initial measurements ..................................................................................... 26

4.9.3 Dry heat ........................................................................................................ 26

4.9.4 Damp heat, cyclic, Test Db, first cycle ........................................................... 26

4.9.5 Cold............................................................................................................... 26

4.9.6 Damp heat, cyclic, Test Db, remaining cycles ................................................ 26

4.9.7 Recovery ....................................................................................................... 26

4.9.8 Final inspections and requirements ................................................................ 27

4.10 Damp heat, steady state ....................................................................................... 27

4.10.1 General ......................................................................................................... 27

4.10.2 Initial inspections ........................................................................................... 27

4.10.3 Test conditions .............................................................................................. 27

4.10.4 Recovery ....................................................................................................... 27

4.10.5 Final inspections and requirements ................................................................ 27

4.11 Endurance ............................................................................................................ 27

4.11.1 General ......................................................................................................... 27

4.11.2 Initial inspections ........................................................................................... 27

4.11.3 Test conditions .............................................................................................. 27

4.11.4 Final inspections and requirements ................................................................ 28

4.12 Charge and discharge ........................................................................................... 28

4.12.1 General ......................................................................................................... 28

4.12.2 Initial inspections ........................................................................................... 28

4.12.3 Test conditions .............................................................................................. 28

4.12.4 Recovery ....................................................................................................... 29

4.12.5 Final inspections and requirements ................................................................ 29

---------------------- Page: 5 ----------------------
– 4 – IEC 60384-23:2015  IEC 2015

4.13 Component solvent resistance (if required) ........................................................... 29

4.14 Solvent resistance of marking (if required) ............................................................ 29

Bibliography .......................................................................................................................... 30

Table 1 – Percentage limit of the rated voltage at a.c. voltage frequency .............................. 11

Table 2 – Test and sampling plan for qualification approval Assessment level EZ ................. 13

Table 3 – Test schedule for qualification approval ................................................................. 14

Table 4 – Lot-by-lot inspection .............................................................................................. 20

Table 5 – Periodic tests ........................................................................................................ 21

Table 6 – Test voltages ......................................................................................................... 22

Table 7 – Tangent of loss angle limits ................................................................................... 23

Table 8 – Requirements regarding insulation resistance ....................................................... 24

Table 9 – Correction factor dependent on test temperature ................................................... 24

Table 10 – Endurance test Grade 1 and Grade 2 capacitors ................................................. 28

Table 11 – Endurance test Grade 3 capacitors ...................................................................... 28

---------------------- Page: 6 ----------------------
IEC 60384-23:2015  IEC 2015 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23: Sectional specification – Fixed metallized polyethylene
naphthalate film dielectric surface mount d.c. capacitors
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60384-23 has been prepared by IEC technical committee 40:

Capacitors and resistors for electronic equipment.

This second edition cancels and replaces the first edition published in 2005 and constitutes a

technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:

a) Revised all parts of the document based on the ISO/IEC Directives, Part 2:2011 (sixth

edition) and harmonization between other similar kinds of documents.
b) Revised tables and Clause 4 so as to prevent duplications and contradictions.
---------------------- Page: 7 ----------------------
– 6 – IEC 60384-23:2015  IEC 2015
The text of this standard is based on the following documents:
FDIS Report on voting
40/2349/FDIS 40/2376/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

The list of all parts of the IEC 60384 series, under the (new) general title Fixed capacitors for

use in electronic equipment, can be found on the IEC web site.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 8 ----------------------
IEC 60384-23:2015  IEC 2015 – 7 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23: Sectional specification – Fixed metallized polyethylene
naphthalate film dielectric surface mount d.c. capacitors
1 General
1.1 Scope

This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with

metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment.

These capacitors have metallized connecting pads or soldering strips and are intended to be

mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors

may have "self-healing properties" depending on conditions of use. They are primarily

intended for applications where the a.c. component is small with respect to the rated voltage.

Capacitors for radio interference suppression are not included, they are covered by

IEC 60384-14.
1.2 Object

The object of this standard is to prescribe preferred ratings and characteristics and to select

from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring

methods and to give general performance requirements for this type of capacitor. Test

severities and requirements prescribed in detail specifications referring to this sectional

specification shall be of equal or higher performance level, lower performance levels are not

permitted.
1.3 Normative references

The following documents, in whole or in part, are normatively referenced in this document and

are indispensable for its application. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60062, Marking codes for resistors and capacitors
IEC 60063, Preferred number series for resistors and capacitors
IEC 60068-1:2013, Environmental testing – Part 1: General and guidance

IEC 60384-1:2008, Fixed capacitors for use in electronic equipment – Part 1: Generic

specification

IEC 61193-2:2007, Quality assessment systems – Part 2: Selection and use of sampling

plans for inspection of electronic components and packages
ISO 3, Preferred numbers – Series of preferred numbers
1.4 Information to be given in a detail specification
1.4.1 General

Detail specifications shall be derived from the relevant blank detail specification.

---------------------- Page: 9 ----------------------
– 8 – IEC 60384-23:2015  IEC 2015

Detail specifications shall not specify requirements inferior to those of the generic, sectional

or blank detail specification. When more severe requirements are included, they shall be

listed in 1.9 of the detail specification and indicated in the test schedules, for example by an

asterisk.

The information given in 1.4.2 may, for convenience, be presented in tabular form.

The following information shall be given in each detail specification and the values quoted

shall preferably be selected from those given in the appropriate clause of this sectional

specification.
1.4.2 Outline drawing and dimensions

There shall be an illustration of the capacitor as an aid to easy recognition and for comparison

of the capacitor with others. Dimensions and their associated tolerances, which affect

interchangeability and mounting, shall be given in the detail specification. All dimensions shall

preferably be stated in millimetres, however, when the original dimensions are given in inches,

the converted metric dimensions in millimetres shall be added.
The numerical values of the body shall be given as follows:
– width, length and height.
The numerical values of the terminals shall be given as follows:
– width, length and spacing.

When necessary, for example when a number of items (sizes and capacitance/voltage ranges)

is covered by a detail specification, the dimensions and their associated tolerances shall be

placed in a table below the drawing.

When the configuration is other than described above, the detail specification shall state such

dimensional information as will adequately describe the capacitor.
1.4.3 Mounting

The detail specification shall give guidance on methods of mounting for normal use. Mounting

for test and measurement purposes (when required) shall be in accordance with 4.1.

1.4.4 Ratings
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.