Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - non-angled, ferrule-less, bore alignment connectors

IEC 61755-3-10: 2016 defines certain dimensional limits of a 125 mm diameter single mode silica fibre optical interface and an alignment bore to meet specific requirements for non-angled fibre-to-fibre interconnection as defined in IEC 61755-2-1. The silica fibre materials specified in this document are suitable for use in categories C, U, E and O as defined in IEC 61753-1.

Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces optiques de connecteurs - Partie 3-10: Paramètres de connecteurs pour fibres unimodales à dispersion non décalée, en contact physique - Connecteurs à alignement par alésage sans férule, sans angle

IEC 61755-3-10:2016 définit certaines limites dimensionnelles d'une interface optique et d'un alésage d'alignement de fibre unimodale en silice d'un diamètre de 125 mm pour satisfaire aux exigences spécifiques pour les interconnexions fibre à fibre sans angle telles qu'elles sont définies dans l'IEC 61755-2-1. Les matériaux des fibres en silice spécifiés dans ce document sont adaptés à une utilisation dans les catégories C, U, E et O comme définies dans l'IEC 61753-1.

General Information

Status
Published
Publication Date
07-Dec-2016
Current Stage
PPUB - Publication issued
Completion Date
08-Dec-2016
Ref Project

Buy Standard

Standard
IEC 61755-3-10:2016 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - non-angled, ferrule-less, bore alignment connectors
English and French language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

IEC 61755-3-10
Edition 1.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Connector
optical interfaces –
Part 3-10: Connector parameters of non-dispersion shifted single mode
physically contacting fibres – Non-angled, ferrule-less, bore alignment
connectors
DIspositifs d’interconnexion et composants passifs a fibres optiques –
Interfaces optiques de connecteurs –
Partie 3-10: Paramètres de connecteurs pour fibres unimodales à dispersion non
décalée, en contact physique – Connecteurs à alignement par alésage sans
férule, sans angle
IEC 61755-3-10:2016-12(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite

ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org

The stand-alone application for consulting the entire The world's leading online dictionary of electronic and

bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in

Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional

documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical

iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary

The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and

variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of

committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been

and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc

details all new publications released. Available online and If you wish to give us your feedback on this publication or

also once a month by email. need further assistance, please contact the Customer Service

Centre: csc@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
65 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC

en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des

comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées

projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just

Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette

Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:

csc@iec.ch.
---------------------- Page: 2 ----------------------
IEC 61755-3-10
Edition 1.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Connector
optical interfaces –
Part 3-10: Connector parameters of non-dispersion shifted single mode
physically contacting fibres – Non-angled, ferrule-less, bore alignment
connectors
DIspositifs d’interconnexion et composants passifs a fibres optiques –
Interfaces optiques de connecteurs –
Partie 3-10: Paramètres de connecteurs pour fibres unimodales à dispersion
non décalée, en contact physique – Connecteurs à alignement par alésage sans
férule, sans angle
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-5155-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– 2 – IEC 61755-3-10:2016 © IEC 2016
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 5

4 Description ...................................................................................................................... 5

5 Interface parameters ....................................................................................................... 6

Bibliography ............................................................................................................................ 9

Figure 1 – Fibre end face dimensions ..................................................................................... 7

Figure 2 – Alignment bore dimensions .................................................................................... 8

Table 1 – Optical interface parameter values for a 125 µm diameter optical fibre and

an alignment bore ................................................................................................................... 8

---------------------- Page: 4 ----------------------
IEC 61755-3-10:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS – CONNECTOR OPTICAL INTERFACES –
Part 3-10: Connector parameters of non-dispersion shifted
single mode physically contacting fibres – Non-angled,
ferrule-less, bore alignment connectors
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 61755-3-10 has been prepared by sub-committee 86B: Fibre optic

interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.

This bilingual version (2017-12) corresponds to the monolingual English version, published in

2016-12.
The text of this standard is based on the following documents:
CDV Report on voting
86B/3990A/CDV 86B/4032/RVC
---------------------- Page: 5 ----------------------
– 4 – IEC 61755-3-10:2016 © IEC 2016

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.
The French version of this standard has not been voted upon.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts in the IEC 61755 series, published under the general title Fibre optic

interconnecting devices and passive components – Connector optical interfaces, can be found

on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 6 ----------------------
IEC 61755-3-10:2016 © IEC 2016 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS – CONNECTOR OPTICAL INTERFACES –
Part 3-10: Connector parameters of non-dispersion shifted
single mode physically contacting fibres – Non-angled,
ferrule-less, bore alignment connectors
1 Scope

This part of IEC 61755 defines certain dimensional limits of a 125 µm diameter single mode

silica fibre optical interface and an alignment bore to meet specific requirements for

non-angled fibre-to-fibre interconnection as defined in IEC 61755-2-1. The silica fibre

materials specified in this document are suitable for use in categories C, U, E and O as

defined in IEC 61753-1.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies.

IEC 61753-1, Fibre optic interconnecting devices and passive components – Part 1: General

and guidance for performance standard

IEC 61755-2-1:2006, Fibre optic connector optical interfaces – Part 2-1: Optical interface

standard single mode non-angled physically contacting fibres
3 Terms and definitions
No terms and definitions are listed in this document.

ISO and IEC maintain terminological databases for use in standardization at the following

addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Description

The performance of a ferrule-less optical interface is determined by the accuracy with which

the optical datum targets of two mating fibres are aligned with each other. There are three

conditions affecting the alignment of two optical datum targets: lateral offset, angular offset

and longitudinal offset.

Parameters influencing the lateral and angular offset of the optical fibre axes of this interface

include the following:
• fibre cladding diameter;
• alignment bore diameter;
---------------------- Page: 7 ----------------------
– 6 – IEC 61755-3-10:2016 © IEC 2016
• length of the bore;
• fibre core location relative to the fibre cladding diameter centerline.

Parameters influencing the optical fibre end face deformation requirements to maintain the

physical contact of two mated connectors to which this interface applies:
• end face spherical radius;
• end face angle;
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.