IEC 61788-11:2011

Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors

IEC 61788-11:2011 covers a test method for the determination of the residual resistance ratio (RRR) of Nb3Sn composite superconductors. This method is intended for use with superconductor specimens that have a monolithic structure with rectangular or round cross-section, RRR less than 350 and cross-sectional area less than 3 mm2, and have received a reaction heat-treatment. Ideally, it is intended that the specimens be as straight as possible; however, this is not always the case, thus care must be taken to measure the specimen in its as received condition. All measurements are done without an applied magnetic field. The method described in the body of this standard is the "reference" method and optional acquisition methods are outlined in Clause A.3. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main revisions are the addition of two new annexes, "Uncertainty considerations" (Annex B) and "Uncertainty evaluation in test method of RRR for Nb3Sn" (Annex C).

Supraconductivité - Partie 11: Mesure du rapport de résistance résiduelle - Rapport de résistance résiduelle des supraconducteurs composites de Nb3Sn

La CEI 61788-11:2011 spécifie une méthode d'essai pour la détermination du rapport de résistance résiduelle (RRR) des supraconducteurs composites de Nb3Sn. Cette méthode est destinée à être utilisée avec des éprouvettes de supraconducteurs présentant une structure monolithique avec une section rectangulaire ou circulaire, un rapport RRR inférieur à 350 et une surface de section inférieure à 3 mm2, et qui ont reçu un traitement thermique de réaction. Dans l'absolu, il est prévu que les éprouvettes soient aussi droites que possible; cependant, ce n'est pas toujours le cas, c'est pourquoi il faut s'assurer que la mesure est effectuée sur des éprouvettes en l'état de livraison. Toutes les mesures sont effectuées sans appliquer de champ magnétique. La méthode décrite dans le corps de texte de la présente norme est la méthode de "référence" et des méthodes d'acquisition facultatives sont présentées à l'Article A.3. Cette deuxième édition annule et remplace la première édition parue en 2003, dont elle constitue une révision technique. Les principales révisions sont l'ajout de deux nouvelles annexes, "Considérations relatives à l'incertitude" (Annexe B) et "Evaluation de l'incertitude de la méthode d'essai de RRR de Nb3Sn" (Annexe C).

General Information

• Status: Withdrawn
• Publication Date: 10-Jul-2011
• Withdrawal Date: 02-Feb-2016
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 29.050 - Superconductivity and conducting materials
• Technical Committee: TC 90 - Superconductivity
• Drafting Committee: WG 4 - TC 90/WG 4
• Current Stage: WPUB - Publication withdrawn
• Completion Date: 05-Feb-2016

Relations

• Revises: IEC 61788-11:2003 - Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61788-11 ®
Edition 2.0 2011-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Superconductivity –
Part 11: Residual resistance ratio measurement – Residual resistance ratio of
Nb Sn composite superconductors
Supraconductivité –
Partie 11: Mesure du rapport de résistance résiduelle – Rapport de résistance
résiduelle des supraconducteurs composites de Nb Sn
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61788-11 ®
Edition 2.0 2011-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Superconductivity –
Part 11: Residual resistance ratio measurement – Residual resistance ratio of
Nb Sn composite superconductors
Supraconductivité –
Partie 11: Mesure du rapport de résistance résiduelle – Rapport de résistance
résiduelle des supraconducteurs composites de Nb Sn
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX S
ICS 17.220; 29.050 ISBN 978-2-88912-581-4

– 2 – 61788-11  IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 7
5 Apparatus . 7
5.1 Material of measuring base plate . 7
5.2 Length of the measuring base plate . 7
5.3 Cryostat for the resistance, R , measurement . 7
6 Specimen preparation. 8
7 Data acquisition and analysis . 8
7.1 Resistance (R ) at room temperature . 8
7.2 Resistance (R ) just above the superconducting transition . 8
7.3 Residual resistance ratio (RRR) . 10
8 Uncertainty and stability of the test method . 11
8.1 Temperature . 11
8.2 Voltage measurement. 11
8.3 Current . 11
8.4 Dimension . 11
9 Test report. 11
9.1 RRR value . 11
9.2 Specimen . 11
9.3 Test conditions . 12
Annex A (informative) Additional information relating to the measurement of RRR . 13
Annex B (informative) Uncertainty considerations . 15
Annex C (informative) Uncertainty evaluation in test method of RRR for Nb Sn . 19
Figure 1 – Relationship between temperature and resistance  . 7
Figure 2 – Voltage (U) versus temperature (T) curves and definitions of each voltage . 9

Table B.1 – Output signals from two nominally identical extensometers . 16
Table B.2 – Mean values of two output signals . 16
Table B.3 – Experimental standard deviations of two output signals. 16
Table B.4 – Standard uncertainties of two output signals . 17
Table B.5 – Coefficient of variations of two output signals. 17
Table C.1 – Uncertainty of each measurement . 20
Table C.2 – Obtained values of R , R and RRR for three Nb Sn samples. 21
1 2 3
61788-11  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SUPERCONDUCTIVITY –
Part 11: Residual resistance ratio measurement –
Residual resistance ratio of Nb Sn composite superconductors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61788-11 has been prepared by IEC Technical Committee 90:
Superconductivity.
This second edition cancels and replaces the first edition published in 2003. It constitutes a
technical revision. The main revisions are the addition of two new annexes, "Uncertainty
considerations" (Annex B) and "Uncertainty evaluation in test method of RRR for Nb Sn"
(Annex C).
– 4 – 61788-11  IEC:2011
The text of this standard is based on the following documents:
FDIS Report on voting
90/268/FDIS 90/279/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61788 series, published under the general title Superconductivity,
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61788-11  IEC:2011 – 5 –
INTRODUC
...