IEC 61754-4:2013/COR1:2014
(Corrigendum)Corrigendum 1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
Corrigendum 1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
General Information
Relations
Standards Content (Sample)
IEC 61754-4
(Second edition – 2013)
Fibre optic interconnecting devices and passive components –
Fibre optic connector interfaces –
Part 4: Type SC connector family
CORRIGENDUM 1
Replace the existing Figures 1 and 2 by the following new figures:
January 2014
Mechanical
datum target
Optical
datum target
Ferrule
View from C direction
Coupling sleev
...
This May Also Interest You
IEC 61300-2-22:2024 describes a procedure to determine the suitability of a fibre optic interconnecting device and a passive component to withstand the effects of a change of temperature or a succession of changes of temperature.
- Standard32 pagesEnglish languagesale 15% off
- Standard20 pagesEnglish and French languagesale 15% off
IEC 61300-2-34:2024 is for testing the resistance to solvents and contaminating fluids on fibre optic interconnecting devices, passive components and protective housings, and their functionality.
- Standard36 pagesEnglish languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
IEC 61754-13:2024 defines the standard interface dimensions for the type FC-PC family of connectors. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revising normative reference reflecting the latest documents;
b) addition of intermateability in 5.2;
c) changes of dimensions of the plug connector interface in Table 2 and Table 3;
d) addition of Grade Am, Bm and Cm in Table 3.
- Standard50 pagesEnglish languagesale 15% off
- Standard29 pagesEnglish and French languagesale 15% off
IEC 61300-2-27:2024 determines the effects of dust on fibre optic interconnecting devices or passive components. This second edition cancels and replaces the first edition published in 1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) the relative humidity requirement during the test has been modified;
c) the procedure description has been modified;
d) Figure 1 showing possible test configurations has been added;
e) the severity of the test has been updated according to the component and performance category;
f) Clause 8 has been added, listing details to be specified and reported.
- Standard21 pagesEnglish and French languagesale 15% off
IEC 61300-1:2022 is available as IEC 61300-1:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61300-1:2022 provides general information and guidance for the basic test and measurement procedures defined in IEC 61300-2 (all parts) and IEC 61300-3 (all parts) for interconnecting devices, passive components, mechanical splices, fusion splice protectors, fibre management systems and protective housings. This document is used in combination with the relevant specification which defines the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this document and the relevant specification, the latter takes precedence. This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of the information of measurement uncertainties in 4.2.1;
- change of the requirements for attenuation variation in 4.2.2;
- addition of the multimode launch conditions of other fibres than A1-OM2, A1-OM3, A1-OM4, A1-OM5 and A3e in 10.4;
- addition of the multimode launch conditions of the planer waveguide in 10.6;
- splitting Annex A for EF and Annex B for EAF;
- correction of errors in the definitions of encircled flux and encircled angular flux.
- Standard68 pagesEnglish languagesale 15% off
- Standard70 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish and French languagesale 15% off
IEC 61300-1: 2024 Amendment 1
- Standard32 pagesEnglish and French languagesale 15% off
IEC 60875-1:2024 is available as IEC 60875-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60875-1:2024 applies to non-wavelength-selective fibre optic branching devices, all exhibiting the following features:
- they are passive, in that they contain no optoelectronic or other transducing elements;
- they have three or more ports for either the entry or exit, or both, of optical power, and share optical power among these ports in a predetermined fashion;
- the ports are optical fibres, or optical fibre connectors.
This document establishes uniform requirements for the optical, mechanical and environmental properties. This seventh edition cancels and replaces the sixth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) removal of variant and reference extensions in clause classification
b) removal of specification system in clause documentation
c) removal of interface standards, reliability standards and interlinking in clause standardization system
- Standard54 pagesEnglish languagesale 15% off
- Standard29 pagesEnglish and French languagesale 15% off
IEC 61755-3-2:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules polished at an 8° angle to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-2. Ferrules made from the material specified in this standard are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) The introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key".
The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key";
c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and are fully backwards compatible to IEC 61755-3-2:2006;
d) The addition of Grade B and Grade C interface requirements for both variants;
f) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability;
g) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug;
h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.
- Standard47 pagesEnglish and French languagesale 15% off
IEC 61755-3-1:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-1. Ferrules made from the material specified in this document are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards.
This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) the introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key". The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key";
c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and backwards compatible to IEC 61755-3-1:2006;
d) The addition of Grade B and Grade C interface requirements for both variants;
e) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability;
f) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug;
g) A new informative Annex C to give guidance related to the simulation of optical interface attenuation;
h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.
- Standard49 pagesEnglish and French languagesale 15% off
IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres.
An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation.
Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.
- Standard64 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard25 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.