IEC 60879:1986
(Main)Performance and construction of electric circulating fans and regulators
Performance and construction of electric circulating fans and regulators
Applies to fans for household and similar purposes and to fans for use in ships of electric motor directly driven fans and their associated regulators intended for use on single-phase a.c. and d.c. circuits not exceeding 250 V. This publication supersedes IEC 60174, 60175, 60176, 60307, 60385 and 60385A. The contents of the corrigendum of January 1992 have been included in this copy.
Aptitude à la fonction et construction des ventilateurs électriques de circulation et leurs régulateurs de vitesse
S'applique aux ventilateurs pour applications domestiques et analogues et aux ventilateurs destinés à être utilisés à bord des navires entraînés directement par un moteur électrique avec régulateur de vitesse, destinés à être utilisés sur des circuits alimentés en courant alternatif monophasé ou en courant continu, à des tensions inférieures ou égales à 250 V. Remplace les CEI 60174, 60175, 60176, 60307, 60385 et 60385A. Le contenu du corrigendum de janvier 1992 a été pris en considération dans cet exemplaire.
General Information
Relations
Standards Content (Sample)
IEC Publication 879
Publication 879 de la CEI
(First edition - 1986)
(Première édition - 1986)
Aptitude à la fonction et construction Performance and construction
of electric circulating fans and
des ventilateurs électriques de circulation
et leurs régulateurs de vitesse regulators
C O R R I G E N D U M 1
Page 21
Page 20
9.6 Measurement of power factor (for
9.6 Mesure du facteur de puissance
a.c. fans only) and power input
(uniquement pour les ventilate
...
This May Also Interest You
IEC 60704-2-7:2020 is available as IEC 60704-2-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60704-2-7:2020 applies to electrical fans (including their accessories and their component parts) for household and similar use, designed for AC or DC supply. The motor, the impeller and their housing, if any, form a single unit. These particular requirements apply to:
– conventional fans,
– table fans,
– pedestal fans,
– ceiling fans,
– bladeless fans,
– wall bracket fans,
– ceiling bracket fans,
– louver fans,
– tower fans,
– ventilating and partition ventilating fans.
This standard does not apply to:
– fans that are part of a ventilation system,
– fans designed exclusively for industrial purposes,
– fans that are part of an appliance (for example cooling fans),
– fans with additional functions (for example heating, humidifying).
Limitations for the use of this test code are given in the scope of IEC 60704-1.
This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision.
This edition includes the following significant changes with respect to the previous edition:
a) it includes additional fan categories as defined in IEC 60879:2019 and IEC 60665:2018;
b) it includes standard deviations of sound power levels in 1.3;
c) a comparison method has been added;
d) the normative references have been updated (ISO 3744:2010 and ISO 3743-1:2010);
e) it has been adjusted with regard to IEC 60704-1:2010.
This International Standard is to be used in conjunction with IEC 60704 1:2010, Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 1: General requirements. This Part 2-7 supplements or modifies the corresponding clauses in IEC 60704-1:2010, so as to establish the test code for fans.
- Standard47 pagesEnglish languagesale 15% off
- Standard30 pagesEnglish and French languagesale 15% off
IEC 60879:2019 specifies the performance-measuring methods of comfort fans and regulators for household and similar purposes, including conventional fans, tower fans and bladeless fans, their rated voltage being not more than 250 V for single-phase fans and 480 V for other fans, and their rated power input being less than 125 W.
According to the testing method, the comfort fans are classified into two groups:
– pedestal fans, table fans, wall fans, louvre fans, tower fans, bladeless fans;
– ceiling fans.
Wherever applicable, the term "fan" used in this document includes its associated regulator, if any.
This document does not apply to:
– safety of electric fans for household and similar purposes (IEC 60335-2-80);
– performance of ventilating fans (IEC 60665);
– electromagnetic compatibility of fans (CISPR 14-1 and CISPR 14-2, IEC 61000-3-2, IEC 61000-3-3).
This second edition cancels and replaces the first edition published in 1986. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the definitions of fans have been revised;
b) the test methods for the different types of fans have been revised to allow modern test instrumentation to be used;
c) acoustic noise measurement and standby power measurement methods have been introduced.
- Standard39 pagesEnglish and French languagesale 15% off
IEC 60665:2018 specifies the performance and the corresponding methods of test of AC ventilating fans for household and similar purposes intended for air forcing and exhaust, driven by single-phase AC motors having a power consumption of less than 125 W (including any associated regulators) for use on single-phase AC circuits not exceeding 250 V.
This document applies to ventilating fans such as partition fans for walls and windows and duct fans.
This document does not apply to:
- the safety of electric fans for household and similar purposes (IEC 60335-2- 80);
- the performance of comfort fans (IEC 60879);
- range hoods and other cooking fume extractors (IEC 61591);
- airborne acoustic noise for fans (IEC 60704-2-7);
- electromagnetic compatibility of fans (CISPR 14-1 and CISPR 14-2, IEC 61000-3-2, IEC 61000-3-3).
This second edition cancels and replaces the first edition published in 1980. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the test chambers have been updated;
b) a test chamber for a type D fan is introduced.
- Standard33 pagesEnglish and French languagesale 15% off
Applies to electrical fans including their accessories and their component parts for household and similar use, designed for a.c. or d.c. supply. Motor, impeller and their housing, if any, form a single unit. Applies to table fans, pedestal fans, ceiling fans and partition fans
- Standard21 pagesEnglish and French languagesale 15% off
IEC 63086-2-1:2024 specifies test methods for measuring the performance of electrically powered household and similar air cleaners intended for the reduction of particulate pollutants.
- Standard70 pagesEnglish and French languagesale 15% off
IEC 60335-2-65:2023 deals with the safety of electric air-cleaning appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.
Appliances not intended for normal household use but that nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account:
- persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
- children playing with the appliance.
Attention is drawn to the fact that
- for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
- in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to
- air-cleaning appliances where harmful radiation is intentionally emitted from the appliance;
- appliances intended exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- air-cleaning systems incorporated in the building structure;
- appliances for medical purposes (IEC 60601 series).
This third edition cancels and replaces the second edition published in 2002, Amendment 1:2008 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 60335-1:2020;
b) deletion or conversion to normative text for some notes (Clause 1, 11.8, 16.101);
c) addition of temperature rise limits for accessible surface (Clause 11);
d) introduction of test probe 19 (8.1.1, 20.2, B.22.3, B.22.4);
e) modification of definition of air-cleaning appliance to include self-contained appliance having treatment system other than filter (3.5.101);
f) addition of symbol IEC 60417-6040 for UV radiation air-cleaning appliances in place of the substance of the marking (7.1, 7.6, 7.12);
g) clarifications on remote operation for air cleaning appliances (22.40, 22.49,22.51);
h) removal of requirements for UV-C resistant materials and UV exposure that are now covered by Part 1 (22.106, 23.101, 32.102, Annex AA).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
- Standard61 pagesEnglish languagesale 15% off
- Standard248 pagesEnglish languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 63086-1:2020 applies to electrically powered household and similar air cleaners intended for use on rated single-phase AC input voltage circuits not exceeding 250 V and DC input voltage circuits not exceeding 48 V.
If the test methods in this document are applied to combination products (air conditioners, humidifiers, dehumidifiers, heaters, etc.) with air cleaning function, they are only aimed at their air cleaning function when tested.
Battery-operated appliances are within the scope of this document. Dual-supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode.
This document is not applicable to:
- appliances intended exclusively for industrial purposes;
- appliances intended for use in medical treatment locations, such as surgical suites, laboratories, medical treatments rooms, etc.
- household range hoods or cooking fume extractors – see IEC 61591.
This first edition cancels and replaces IEC PAS 62587 published in 2008.
- Standard37 pagesEnglish and French languagesale 15% off
- Standard74 pagesEnglish and French languagesale 15% off
IEC PAS 63086-3-1:2023 specifies a method to evaluate the capability of portable household air cleaners to reduce the concentration and viability of key experimentally generated bioaerosols in a specified chamber.
Indoor air free of harmful microbes is important to the health of occupants. This is particularly relevant with regard to increased time spent indoors.
Air cleaners are used to reduce the concentrations of microorganisms in indoor air.
The efficiency of such air cleaners to reduce airborne microorganisms can be assessed in test chambers at controlled air temperature and relative air humidity.
The test is applicable to portable air cleaners commonly used in single room spaces such as those based on mechanical filtration, ultraviolet (UV), ionizers, photocatalytic oxidation, and ozone generators in-unit technology.
If the air cleaner does not claim to have the function of reducing microorganisms, this document may not be applicable unless it is being used to simply evaluate the performance.
This document deals with measurement procedures regarding the reduction of the microbial contamination related to electrical air cleaner appliances for household and similar use.
This document does not apply to appliances intended to be used in medical, veterinary, or pharmaceutical applications.
This document does not address sanitization, disinfection, or sterilization measures.
This document does not support, by itself any health-related claims or conclusions about prevention or treatment of a disease or health improvement.
- Technical specification28 pagesEnglish languagesale 15% off
IEC 60335-2-40:2022 deals with the safety of electric heat pumps, sanitary hot water heat pumps and air conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units. Their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for multi-phase appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. The appliances referenced above can consist of one or more factory-made assemblies. If provided in more than one assembly, the separate assemblies are used together, and the requirements are based on the use of matched assemblies. This document does not take into account refrigerants other than group A1, A2L, A2 and A3 as defined by ISO 817. Flammable refrigerants are limited to those of a molar mass of more than or equal to 42 kg/kmol based on WCF (worst case formulation) as specified in ISO 817. As far as practical, this document deals with common hazards presented by appliances that are encountered in normal use and assumes that installation, servicing, decommissioning, and disposal are safely handled by competent persons and accidental release of refrigerants is avoided. However, it does not prescribe the criteria to ensure competence of persons during installation, servicing and disposal. Safety requirements during disposal are not specified in this standard. Supplementary heaters, or a provision for their separate installation, are within the scope of this standard, but only heaters which are designed as a part of the appliance package, the controls being incorporated in the appliance. Attention is drawn to the fact that
- for appliances intended to be used in vehicles or on-board ships or aircraft, additional requirements can be necessary;
- in many countries, additional requirements are specified, for example, by the national health authorities responsible for the protection of labour and the national authorities responsible for storage, transportation, building constructions and installations.
This document does not apply to
- humidifiers intended for use with heating and cooling equipment (IEC 60335-2-88);
- appliances designed exclusively for industrial processing;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This seventh edition cancels and replaces the sixth edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Clause 1: added thermoelectric heat pumps to the scope and increased maximum rated voltage to 300 V for single phase appliances;
- Clause 7: revised requirements for marking on the appliance and packaging, including a symbol for minimum floor area and modifying the symbol for flammable refrigerants to include the safety group per ISO 817;
- Clause 11 and Clause 19: restructured for alignment with Part 1 and added requirements for supplementary air heaters;
- Clause 13 and Clause 16: revised requirement for leakage current for stationary class I motor-operated appliances;
- Clause 21: added requirements for particle foam material and revised requirements for transport testing;
- Clause 22: removed limit on the sum of refrigerant charges for appliances with multiple refrigerating systems, and revised requirements for avoiding ignition sources, leak detection systems, safety shut-off valves, and particle foam material;
- Clause 23: added requirements to avoid contact between wires and refrigerant piping;
- Clause 24
- Standard511 pagesEnglish languagesale 15% off
- Standard633 pagesEnglish languagesale 15% off
- Standard322 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.