IEC 62319-1:2005

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification

IEC 62319-1:2005(E) prescribes terms and methods of test for polymeric positive temperature coefficient thermistors, insulated and non-insulated types, typically intended for use in current limiting and overcurrent protection applications. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components. The contents of the corrigendum of March 2009 have been included in this copy.

General Information

• Status: Published
• Publication Date: 14-Feb-2005
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 31.040.30 - Thermistors
• Technical Committee: TC 40 - Capacitors and resistors for electronic equipment
• Current Stage: PPUB - Publication issued
• Start Date: 15-Apr-2005
• Completion Date: 15-Feb-2005

Standards Content (Sample)

INTERNATIONAL IEC


STANDARD 62319-1



First edition
2005-02

Polymeric thermistors –
Directly heated positive step function
temperature coefficient –
Part 1:
Generic specification
Reference number
IEC 62319-1:2005(E)

---------------------- Page: 1 ----------------------
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]

---------------------- Page: 2 ----------------------
INTERNATIONAL IEC


STANDARD 62319-1





First edition
2005-02


Polymeric thermistors –
Directly heated positive step function
temperature coefficient –
Part 1:
Generic specification

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
V
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

---------------------- Page: 3 ----------------------
– 2 – 62319-1  IEC:2005(E)
CONTENTS
FOREWORD.4

1 General .6
1.1 Scope.6
1.2 Normative references .6
2 Technical data.7
2.1 Units and symbols .7
2.2 Terms and definitions.7
2.3 Preferred values .10
2.4 Marking .11
3 Quality assessment procedures .11
3.1 General .11
3.2 Primary stage of manufacture .11
3.3 Subcontracting .12
3.4 Structurally similar components .12
3.5 Qualification approval procedures .
...