IEC 60384-4-1:2007

Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ

IEC 60384-4-1:2007 is a blank detail specification and is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. This third edition cancels and replaces the second edition published in 2000 and constitutes a minor revision related to tables, figures and references. This bilingual version, published in 2008, corresponds to the English version.

Condensateurs fixes utilisés dans les équipements électroniques - Partie 4-1: Spécification particulière cadre - Condensateurs fixes électrolytiques à l'aluminium, à électrolyte non solide - Niveau d'assurance EZ

La CEI 60384-4-1:2007 est une spécification particulière cadre et est un document annexe à la spécification intermédiaire qui contient des exigences pour le modèle, la disposition et le contenu minimum des spécifications particulières. Les spécifications particulières qui ne satisfont pas aux exigences peuvent ne pas être considérées comme conformes aux spécifications de la CEI et ne doivent pas être décrites comme telles. Cette troisième édition annule et remplace la deuxième édition publiée en 2000. Elle constitue une révision mineure des tableaux, valeurs et références. La présente version bilingue, publiée en 2008, correspond à la version anglaise.

General Information

• Status: Published
• Publication Date: 11-Mar-2007
• ICS: 31.060.50 - Aluminium electrolytic capacitors
• Technical Committee: TC 40 - Capacitors and resistors for electronic equipment
• Current Stage: PPUB - Publication issued
• Start Date: 12-Mar-2007
• Completion Date: 15-Apr-2007

Relations

• Revises: IEC 60384-4-1:2000 - Fixed capacitors for use in electronic equipment - Part 4: Blank detail specification - Aluminium electrolytic capacitors with non-solid electrolyte - Assessment level E
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60384-4-1
QC 300301
Third edition
2007-03
Fixed capacitors for use in electronic equipment –
Part 4-1:
Blank detail specification –
Fixed aluminium electrolytic
capacitors with non-solid electrolyte –
Assessment level EZ
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 60384-4-1
QC 300301
Third edition
2007-03
Fixed capacitors for use in electronic equipment –
Part 4-1:
Blank detail specification –
Fixed aluminium electrolytic
capacitors with non-solid electrolyte –
Assessment level EZ
© IEC 2007 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale P
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60384-4-1 © IEC:2007(E)
CONTENTS
FOREWORD.3

1 General data .7

1.1 Recommended method(s) of mounting (to be inserted).7

1.2 Dimensions .7

1.3 Ratings and characteristics .7

1.4 Normative references .8

1.5 Marking .8
1.6 Ordering information.8
1.7 Certified records of released lots.8
1.8 Additional information (not for inspection purposes) .8
1.9 Additional or increased severities or requirements to those specified in the
generic and/or sectional specification .8
2 Inspection requirements .9
2.1 Procedures.9

Table 1 – Case size reference and dimensions .7
Table 2 – Values of capacitance and of voltage related to case sizes .7
Table 3 – Tangent of loss angle, impedance and rated ripple current.8
Table 4 – Other characteristics .8
Table 5 – Test schedule for qualification conformance inspection .9

60384-4-1 © IEC:2007(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 4-1: Blank detail specification –

Fixed aluminium electrolytic capacitors with non-solid electrolyte –

Assessment level EZ
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60384-4-1 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This third edition cancels and replaces the second edition published in 2000 and constitutes a
minor revision related to tables, figures and references.
The text of this standard is based on the following documents:
CDV Report on voting
40/1762/CDV 40/1820/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 60384-4-1 © IEC:2007(E)
The QC number that appears on the front cover of this publication is the specification number

in the IEC Quality Assessment System for Electronic Components (IECQ).

The list of all parts of the IEC 60384 series, under the general title Fixed capacitors for use in

electronic equipment, can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in

the data related to the specific publication. At this date, the publication will be

• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

60384-4-1 © IEC:2007(E) – 5 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 4-1: Blank detail specification –

Fixed aluminium electrolytic capacitors with non-solid electrolyte –

Assessment level EZ
Blank detail specification
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style and layout and minimum content of detail specifications. Detail
specifications not complying with these requirements may not be considered as being in
accordance with IEC specifications nor shall they be so described.
In the preparation of detail specifications, the contents of 1.4 of the sectional specification
shall be taken into account.
The numbers between brackets on the first page correspond to the following information
which shall be inserted in the position indicated.
Identification of the detail specification
[1] The International Electrotechnical Commission or the National Standards Organization
under whose authority the detail specification is drafted.
[2] The IEC or National Standards number of the detail specification, data of issue and any
further information required by the national system.
[3] The number and issue number of the IEC or national generic specification.
[4] The IEC number of the blank detail specification.
Identification of the capacitor
[5] A short description of the type of capacitor.
[6] Information on typical construction (when applicable).
NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in the
detail specification in this position.

[7] Outline drawing with main dimensions which are of importance for interchangeability
and/or reference to the national or international documents for outlines. Alternatively, this
drawing may be given in an annex to the detail specification.
[8] Application or group of applications covered and/or assessment level.
NOTE The assessment level(s) to be used in a detail specification are selected from 3.5.4 of the sectional
specification. This implies that one blank detail specification may be used in combination with several
assessment levels, provided the grouping of the tests does not change.
[9] Reference data on the most important properties, to allow comparison between the
various capacitor types.
– 6 – 60384-4-1 © IEC:2007(E)
[1] IEC 60384-4-1-XXX [2]
QC 300301-XXX
ELECTRONIC COMPONENTS OF ASSESSED IEC 60384-4-1 [4]

QUALITY IN ACCORDANCE WITH:
QC 300301
IEC 60384-1
FIXED ALUMINIUM ELECTROLYTIC [5]
IEC 60384-4
CAPACITORS WITH
NON-SOLID ELECTROLYTE
[3]
Outline drawing: (see Table 1)
(. angle projection)
[7]
[6]
(Other shapes are permitted within Assessment level(s): EZ [8]
the dimensions given.)
Performance grade:
Information on the availability of components qualified to this
detail specification is given in the IEC QC 001005.
[9]
60384-4-1 © IEC:2007(E) – 7 –
1 General data
1.1 Recommended method(s) of mounting (to be inserted)

See 1.4.2 of IEC 60384-4.
1.2 Dimensions
Table 1 – Case size reference and dimensions

Dimensions
mm
Case size reference
∅ L H d .
NOTE 1 When there is no case size reference, Table 1 may be omitted and the dimensions given in Table 2,
which then becomes Table 1.
NOTE 2 The dimensions are given as maximum dimensions or as nominal dimensions with a tolerance.

1.3 Ratings and characteristics
Capacitance range (see Table 2)
Tolerance on rated capacitance
Rated voltage (see Table 2)
Category voltage (if applicable) (see Table 2)
Climatic category
Rated temperature
Rated ripple current (see Table 3)
Tangent of loss angle (see Table 3)
NOTE Instead of the tangent of loss angle (tan δ), the equivalent series resistance ESR may be specified in
accordance with 4.3.3.2d) of IEC 60384-4.
Leakage current
Impedance (if applicable) (see Table 3)

Reverse voltage (if required)
Insulation resistance (if applicable)
Table 2 – Values of capacitance and of voltage related to case sizes
Rated voltage
a
Category voltage
Case size Case size Case size Case size
Rated capacitance
μF
a
If different from the rated voltage.

– 8 – 60384-4-1 © IEC:2007(E)
Table 3 – Tangent of loss angle, impedance and rated ripple current

U C Tangent of loss angle Impedance at. °C, Rated ripple current
R R
at. °C,. Hz . Hz (if applicable) at. °C,. Hz

V A
μF Ω
1.4 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60384-1, Fixed capacitors for use in electronic equipment – Part 1: Generic specification
IEC 60384-4, Fixed capacitors for use in electronic equipment – Part 4: Sectional
specification – Aluminium electrolytic capacitors with solid (MnO ) and non-solid electrolyte
IEC 60410, Sampling plans and procedures for inspection by attributes
1.5 Marking
The marking of the capacitor and the package shall be in accordance with the requirements of
1.6 of IEC 60384-4.
The details of the marking of the component and package are given in full in the detail
specification.
1.6 Ordering information
Orders for capacitors covered by this specification shall conta
...

IEC 60384-4-1
Edition 3.0 2007-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
QC 300301
Fixed capacitors for use in electronic equipment –
Part 4-1: Blank detail specification – Fixed aluminium electrolytic capacitors with
non-solid electrolyte – Assessment level EZ

Condensateurs fixes utilisés dans les équipements électroniques –
Partie 4-1: Spécification particulière cadre – Condensateurs fixes électrolytiques
à l’aluminium, à électrolyte non solide – Niveau d’assurance EZ

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60384-4-1
Edition 3.0 2007-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
QC 300301
Fixed capacitors for use in electronic equipment –
Part 4-1: Blank detail specification – Fixed aluminium electrolytic capacitors
with non-solid electrolyte – Assessment level EZ

Condensateurs fixes utilisés dans les équipements électroniques –
Partie 4-1: Spécification particulière cadre – Condensateurs fixes électrolytiques
à l’aluminium, à électrolyte non solide – Niveau d’assurance EZ

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
Q
CODE PRIX
ICS 31.060.50 ISBN 2-8318-9903-6
– 2 – 60384-4-1 © IEC:2007
CONTENTS
FOREWORD.3
1 General data .7
1.1 Recommended method(s) of mounting (to be inserted).7
1.2 Dimensions .7
1.3 Ratings and characteristics .7
1.4 Normative references .8
1.5 Marking .8
1.6 Ordering information.8
1.7 Certified records of released lots.8
1.8 Additional information (not for inspection purposes) .8
1.9 Additional or increased severities or requirements to those specified in the
generic and/or sectional specification .8
2 Inspection requirements .9
2.1 Procedures.9

Table 1 – Case size reference and dimensions .7
Table 2 – Values of capacitance and of voltage related to case sizes .7
Table 3 – Tangent of loss angle, impedance and rated ripple current.8
Table 4 – Other characteristics .8
Table 5 – Test schedule for qualification conformance inspection .9

60384-4-1 © IEC:2007 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 4-1: Blank detail specification –
Fixed aluminium electrolytic capacitors with non-solid electrolyte –
Assessment level EZ
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-4-1 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This third edition cancels and replaces the second edition published in 2000 and constitutes a
minor revision related to tables, figures and references.
This bilingual version, published in 2008, corresponds to the English version.

– 4 – 60384-4-1 © IEC:2007
The text of this standard is based on the following documents:
CDV Report on voting
40/1762/CDV 40/1820/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The French version of this standard has not been voted upon.
The QC number that appears on the front cover of this publication is the specification number
in the IEC Quality Assessment System for Electronic Components (IECQ).
The list of all parts of the IEC 60384 series, under the general title Fixed capacitors for use in
electronic equipment, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60384-4-1 © IEC:2007 – 5 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 4-1: Blank detail specification –
Fixed aluminium electrolytic capacitors with non-solid electrolyte –
Assessment level EZ
Blank detail specification
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style and layout and minimum content of detail specifications. Detail
specifications not complying with these requirements may not be considered as being in
accordance with IEC specifications nor shall they be so described.
In the preparation of detail specifications, the contents of 1.4 of the sectional specification
shall be taken into account.
The numbers between brackets on the first page correspond to the following information
which shall be inserted in the position indicated.
Identification of the detail specification
[1] The International Electrotechnical Commission or the National Standards Organization
under whose authority the detail specification is drafted.
[2] The IEC or National Standards number of the detail specification, data of issue and any
further information required by the national system.
[3] The number and issue number of the IEC or national generic specification.
[4] The IEC number of the blank detail specification.
Identification of the capacitor
[5] A short description of the type of capacitor.
[6] Information on typical construction (when applicable).
NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in the
detail specification in this position.
[7] Outline drawing with main dimensions which are of importance for interchangeability
and/or reference to the national or international documents for outlines. Alternatively, this
drawing may be given in an annex to the detail specification.
[8] Application or group of applications covered and/or assessment level.
NOTE The assessment level(s) to be used in a detail specification are selected from 3.5.4 of the sectional
specification. This implies that one blank detail specification may be used in combination with several
assessment levels, provided the grouping of the tests does not change.
[9] Reference data on the most important properties, to allow comparison between the
various capacitor types.
– 6 – 60384-4-1 © IEC:2007
[1] IEC 60384-4-1-XXX [2]
QC 300301-XXX
ELECTRONIC COMPONENTS OF ASSESSED IEC 60384-4-1 [4]
QUALITY IN ACCORDANCE WITH:
QC 300301
IEC 60384-1
FIXED ALUMINIUM ELECTROLYTIC [5]
IEC 60384-4
CAPACITORS WITH
NON-SOLID ELECTROLYTE
[3]
Outline drawing: (see Table 1)
(. angle projection)
[7]
[6]
(Other shapes are permitted within Assessment level(s): EZ [8]
the dimensions given.)
Performance grade:
Information on the availability of components qualified to this
detail specification is given in the IEC QC 001005.
[9]
60384-4-1 © IEC:2007 – 7 –
1 General data
1.1 Recommended method(s) of mounting (to be inserted)
See 1.4.2 of IEC 60384-4.
1.2 Dimensions
Table 1 – Case size reference and dimensions
Dimensions
mm
Case size reference
∅ L H d .
NOTE 1 When there is no case size reference, Table 1 may be omitted and the dimensions given in Table 2,
which then becomes Table 1.
NOTE 2 The dimensions are given as maximum dimensions or as nominal dimensions with a tolerance.

1.3 Ratings and characteristics
Capacitance range (see Table 2)
Tolerance on rated capacitance
Rated voltage (see Table 2)
Category voltage (if applicable) (see Table 2)
Climatic category
Rated temperature
Rated ripple current (see Table 3)
Tangent of loss angle (see Table 3)
NOTE Instead of the tangent of loss angle (tan δ), the equivalent series resistance ESR may be specified in
accordance with 4.3.3.2 of IEC 60384-4.
Leakage current
Impedance (if applicable) (see Table 3)
Reverse voltage (if required)
Insulation resistance (if applicable)
Table 2 – Values of capacitance and of voltage related to case sizes
Rated voltage
a
Category voltage
Case size Case size Case size Case size
Rated capacitance
μF
a
If different from the rated voltage.

– 8 – 60384-4-1 © IEC:2007
Table 3 – Tangent of loss angle, impedance and rated ripple current
U C Tangent of loss angle Impedance at. °C, Rated ripple current
R R
at. °C,. Hz . Hz (if applicable) at. °C,. Hz

V A
μF Ω
1.4 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60384-1, Fixed capacitors for use in electronic equipment – Part 1: Generic specification
IEC 60384-4:2007, Fixed capacitors for use in electronic equipment – Part 4: Sectional
specification – Aluminium electrolytic capacitors with solid (MnO ) and non-solid electrolyte
IEC 60410:1973, Sampling plans and procedures for inspection by attributes
1.5 Marking
The marking of the capacitor and the package shall be in accordance with the requirements of
1.6 of IEC 60384-4.
The details of the marking of the component and package are given in full in the detail
specification.
1.6 Ordering information
Orders for capacitors covered by this specification shall contain, in clear or in coded form, the
following minimum information.
a) Rated capacitance.
b) Tolerance on rated capacitance.
c) Rated d.c. voltage.
d) Number and issue reference of the detail specification and style reference.
1.7 Certified records of released lots
Required/not required.
1.8 Additional information (not for inspection purposes)
1.9 Additional or increased severities or requirements to those specified in the
generic and/or sectional specification
NOTE Additions or increased requirements should be specified only when essential.
Table 4 – Other characteristics
This table is to be used for defining characteristics
which are additional to, or more severe than, those
given in the sectional specification.

60384-4-1 © IEC:2007 – 9 –
2 Inspection requirements
2.1 Procedures
2.1.1 For qualification approval, the procedures shall be in accordance with 3.4 of the
sectional specification, IEC 60384-4.
2.1.2 For quality conformance inspection, the test schedule (Table 5) includes sampling,
periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.1
of the sectional specification.
Table 5 – Test schedule for qualification conformance inspection
b b b b
Subclause number D Conditions IL n c Performance
a a a
and test or of test requirements

ND
Group A inspection
(lot-by-lot)
c c
Subgroup A1 ND 0
S-3
4.2 Visual examination   As in 4.2
Legible marking and as
specified in 1.5 of this
specification
4.2 Dimensions   As specified in Table 1 of
(gauging) this specification
c c
Subgroup A2 ND 0
S-3
4.3.1 Leakage   As in 4.3.1.2
Protective resistance:. Ω
4.3.2 Capacitance Frequency:. Hz  Within specified tolerance
4.3.3 Tangent of  Frequency:. Hz  As in 4.3.3.2
loss angle
4.3.4 Impedance  Frequency:. Hz  Within limit specified
(if applicable) in the detail specification
a
Subclause number of tests and performance requirements refer to IEC 60384-4 and Clause 1 of this
specification.
b
In this table,
IL = inspection level (IEC 60410)
n = sample size
c = permissible number of non-conforming items
p = periodicity in months
D = destructive
ND = non-destructive
c
Number to be tested: Sample size as directly allotted to the code letter for IL in Table II A of IEC 60410.

– 10 – 60384-4-1 © IEC:2007
Table 5 (continued)
b b b b
Subclause number D Conditions IL n c Performance
a a a e
and test or of test requirements

ND
Group B inspection
(lot-by-lot)
c c
Subgroup B1 ND 0
S-3
d
4.6 Solderability Method:.  Good tinning as evidenced
by free flowing of the solder
with wetting of the
terminations or meet the
required parameter(s) in the
detail specification as
applicable
4.17.1 Initial measurement Capacitance
4.17 Storage at  Temperature:
high temperature Upper category temperature
(if required)
Duration: 96 h ± 4 h
Recovery: 16 h min.
4.17.3 Final measurements Visual examination  No visible damage and no
leakage of electrolyte
Leakage current
≤2 times the limits in 4.3.1
Capacitance  ΔC/C ≤10 % of value
measured in 4.17.1
Tangent of loss angle
≤1,2 times the limit in 4.3.3
c c
Subgroup B2 ND 0
S-3
4.19 Characteristics  The capacitors shall be
at high and low measured at each temperature
temperature step
Step 1: 20 °C
Impedance (at same frequency
as Step 2)
Step 2:
Lower category temperature
Impedance  Ratio with respect to value
in Step 1
Rated voltage Ratio of
V impedance
U ≤ 6,3
≤ 10
R
6,3 < U ≤ 16 ≤ 8
R
16 < U ≤ 160 ≤ 6
R
160 < U
≤ 10
R
a
Subclause number of tests and performance requirements refer to IEC 60384-4 and Clause 1 of this
specification.
b
In this table,
IL = inspection level (IEC 60410)
n = sample size
c = permissible number of non-conforming items
p = periodicity in months
D = destructive
ND = non- destructive
c
Number to be tested: Sample size as directly allotted to the code letter for IL in Table II A of IEC 60410.
d
Not applicable to capacitors with screw terminations or other terminations not designed to be soldered, as stated
in the detail specifications.
e
The tests in subgroup B1 are considered non-destructive provided that the (optional) high-temperature storage
test is not applied. If the storage at high-temperature test is carried out, the capacitors are re-aged and
submitted for inspection as part of a subsequent lot.

60384-4-1 © IEC:2007 – 11 –
Table 5 (continued)
Subclause number D Conditions Sample size and Performance
a a a
and test or of test criterion of requirements
c
ND acceptability
p n c
Group C inspection
(periodic)
Subgroup C1A D 6 9 0
Part of sample of
subgroup C1
4.2 Dimensions    See detail specification
(detail)
4.4.1 Initial measurement Capacitance
4.4 Robustness of Visual examination   No visible damage
terminations Method:.
Severity:.
4.5 Resistance to  No pre-drying
soldering heat* Method:.
4.5.2 Final measurements Visual examination   No visible damage
Legible marking
Capacitance
ΔC/C ≤5 % of value
measured in 4.4.1
Subgroup C1B D 6 18 0
Other part of sample
of group C1
4.7.1 Initial measurement Capacitance
T = lower category
A
4.7 Rapid change
temperature
of temperature
T = upper category
B
temperature
Five cycles
Duration t = 30 min or 3 h
Recovery: 16 h
4.7.3 Final measurements Visual examination   No visible damage and no
leakage of electrolyte
4.8 Vibration Method of mounting: see 1.1
of this specification
Frequency range:
..... Hz to..... Hz
Amplitude:. mm or
acceleration:. m/s
(whichever is the less severe)
Total duration:. h
4.8.2 Final measurements Visual examination   No visible damage and
no leakage of electrolyte.
Legible marking
Capacitance
ΔC/C ≤5 % of value
measured in 4.7.1, unless
otherwise specified in the
detail specification
* Not applicable to capacitors with screw terminations or other terminations not designed to be soldered, as stated
in the detail specification.
– 12 – 60384-4-1 © IEC:2007
Table 5 (continued)
Subclause number D Conditions Sample size and Performance
a a a
and test or of test criterion of requirements
c
ND acceptability
p n c
Subgroup C1B (concluded)
4.9 Bump (or shock, Method of mounting: see 1.1
see 4.10) of this specification
Number of bumps:.
Acceleration: 400 m/s
Duration of pulse: 6 ms
4.10 Shock (or bump, Method of mounting: see 1.1
see 4.9) of this specification

Acceleration:. m/s
Duration of pulse:. ms
4.9.2 or 4.10.2 Final Visual examination   No visible damage and no
measurements leakage of electrolyte
Capacitance
ΔC/C ≤5 % of value
measured in 4.7.1, unless
otherwise specified in the
detail specification
Subgroup C1 D 6 27 0
Combined sample of
specimens of subgroups
C1A and C1B
4.11 Climatic sequence
4.11.1 Dry heat Temperature:
upper category temperature
Duration: 16 h
4.11.2 Damp heat, cyclic,
test Db, first cycle
4.11.3 Cold Temperature:
lower category temperature
Duration: 2 h
4.11.4 Low air pressure  Air pressure:
(if required by the 8 kPa
detail specification)
4.11.4.3 Intermediate Visual examination  No breakdown, flashover or
measurement harmful deformation
of the case
4.11.5 Damp heat, cyclic,
Test Db, remaining
cycles
4.11.6 Sealing (if required Method:.
by the detail
specification)
4.11.7 Final measurements Visual examination  No visible damage and no
leakage of electrolyte
Legible marking
Leakage current  As in 4.3.1
Capacitance  ΔC/C ≤10 % of value
measured in 4.5.2, 4.9.2
or 4.10.2 as applicable
Tangent of loss angle
≤1,2 times limit in 4.3.3
60384-4-1 © IEC:2007 – 13 –
Table 5 (continued)
Subclause number D Conditions Sample size Performance
a a a
and test or of test and criterion requirements
c
ND of acceptability
p n c
Subgroup C2 D 6 9 0
4.12 Damp heat,
steady state
4.12.1 Initial measurement Capacitance
4.12.2 Final measurements Visual examination  No visible damage and no
leakage of electrolyte
Legible marking
Leakage current  As in 4.3.1
Capacitance
ΔC/C for
Long-life grade:
≤10 %
General-purpose grade:
≤20 % of value measured
in 4.12.1
Tangent of loss angle
≤1,2 times limit in 4.3.3
Impedance
≤1,2 times limit in the
detail specification
Insulation resistance
≥100 MΩ
of the external insulation
(if applicable)
Voltage proof of the external  No breakdown or flashover
insulation (if applicable)
Subgroup C3 D 3 21 0
4.13 Endurance Duration:
Long-life grade:: … h
General-purpose grade:: … h
Temperature:
upper category temperature
Applied voltage:. V
Recovery: 16 h min.
4.13.1 Initial measurement Capacitance
4.13.3 Final measurements Visual examination  No visible damage and
d
no leakage of electrolyte
Leakage current  As in 4.3.1
Capacitance
ΔC/C compared to values
measured in 4.13.1
Long-life grade:
Rated voltage ΔC/C
V
%
+ 15 to – 30
U ≤6,3
R
± 20
6,3 R
160 R
General-purpose grade:
Rated voltage
ΔC/C
V
%
U ≤6,3 + 25 to – 40
R
6,3 < U ≤160 ± 30
R
160 < U
± 15
R
– 14 – 60384-4-1 © IEC:2007
Table 5 (continued)
Subclause number D Conditions Sample size and Performance
a a a
and test or of test criterion of requirements
c
ND acceptability
p n c
Subgroup C3 (concluded) Tangent of loss angle  Long-life grade:
≤1,5 times the limit in 4.3.3
General-purpose grade:
≤2 times the limit in 4.3.3 or
≤0,4 whichever is
the greater
Impedance  Long-life grade:
≤2 times limit in
detail specification
General purpose grade:
≤4 times the limit in
detail specification
Insulation resistance
≥100 MΩ
of the external insulation
(if applicable)
Voltage proof of the external  No breakdown or flashover
insulation (if applicable)
Subgroup C4A D 12 6 0
4.14 Surge Number of cycles: 1 000
Temperature:. °C
Charge voltage:
1,15 U or 1,15 U
R C
for U ≤315 V
R
or
1,10 U or 1,10 U
R C
for U > 315 V
R
Duration of charge: 30 s
Duration of non-load:
5 min 30 s
4.14.1 Initial measurement Capacitance
4.14.3 Final measurements Visual examination   No visible damage and
d
no leakage of electrolyte
Leakage current   As in 4.3.1
Capacitance
ΔC/C ≤15 % of value
measured in 4.14.1
Tangent of loss angle   As in 4.3.3
Subgroup C4B D 12 6 0 0
4.15 Reverse voltage Duration: 125 h, at upper
(if required) category temperature with
a direct voltage of 1 V d.c.
in reverse polarity direction,
unless otherwise specified
in the detail specification,
followed by 125 h at upper
category temperature with
category voltage in forward
polarity direction
4.15.1 Initial measurement Capacitance
4.15.3 Final measurements Leakage current   As in 4.3.1
Capacitance   ΔC/C ≤. % of value
measured in 4.15.1
Tangent of loss angle   As in 4.3.3
4.16 Pressure relief  Test method:.   Device shall open without
(if required) danger of explosion or fire

60384-4-1 © IEC:2007 – 15 –
Table 5 (continued)
Subclause number D Conditions Sample size and Performance
a a a
and test or of test criterion of requirements
c
ND acceptability
p n c
Subgroup C5A ND 6 12 0
4.17 Storage at high Temperature:
temperature* upper category temperature
Duration: 96 h ± 4 h
Recovery: 16 h min.
4.17.1 Initial measurement Capacitance
4.17.3 Final measurements Visual examination  No visible damage and
d
no leakage of electrolyte
Leakage current
≤2 times the limit in 4.3.1
Capacitance  ΔC/C ≤10 % of value
measured in 4.17.1
Tangent of loss angle  ≤1,2 times the limit in 4.3.3

4.22 Voltage transient
overload (if
required) ****
4.22.1 Initial measurement Capacitance
4.22.2 Final measurements Visual examination  See detail specification

Capacitance See detail specification
Leakage current See detail specification
Tangent of loss angle See detail specification
Other parameters See detail specification
Subgroup C5B** ND 12 6 0
4.18 Storage at low Duration: 16 h, or 4 h after
temperature thermal stability has been
reached (whichever is
the shorter)
Temperature: –40 °C
Recovery: 16 h min.
4.18.1 Initial measurement Capacitance
4.18.2 Final measurements Visual examination  No visible damage and
no leakage of electrolyte
Legible marking
Leakage current  As in 4.3.1
Capacitance
ΔC/C ≤10 % of value
measured in 4.18.1
Tangent of loss angle  As in 4.3.3

Subgroup C6 D 6 15 0
4.19 Characteristics The capacitors shall be
at high and low measured at each
temperature temperature step
Step 1: 20 °C  For use as reference value
Capacitance***
Tangent of loss angle***  For use as reference value
Impedance (at same
frequency as Step 2)
* Not applicable if test is made in subgroup B1.
** This subgroup only applies to capacitors with a lower category temperature of –25 °C and –10 °C.
*** If applicable.
**** This test is applicable for only non-solid electrolyte capacitors and if required in the detail specification.

– 16 – 60384-4-1 © IEC:2007
Table 5 (continued)
Subclause number D Conditions Sample size and Performance
a a a
and test or of test criterion of requirements
c
ND acceptability
p n c
Subgroup C6 (continued) Step 2:
Lower category temperature
Impedance  Ratio with respect to values
in Step 1:
Rated voltage Ratio of
V impedance
U ≤6,3 ≤ 10
R
6,3 R
16 R
160 ≤ 10
R
Step 3:
Upper category temperature
Leakage current
At 125 °C: ≤0 times
the limit of 4.3.1
At 105 °C: ≤8 times
the limit of 4.3.1
At 100 °C: ≤8 times
the limit of 4.3.1
At 85 °C: ≤5 times
the limit of 4.3.1*
Capacitance*  See detail specification
Tangent of loss angle*  See detail specification
4.20 Charge and Temperature: 20 °C
discharge Number of cycles:
(if required) U ≤ 160 V: 10
R
U > 160 V:
R
under consideration
Duration of charge: 0,5 s
Duration of discharge: 0,5 s
4.20.1 Initial measurement Capacitance
4.20.3 Final measurements Visual examination  No visible damage and
no leakage of electrolyte
Capacitance
ΔC/C ≤10 % of value
measured in 4.20.1
* If applicable
a
Subclause numbers of tests and performance requirements refer to IEC 60384-4 and Clause 1 of this
specification.
b
Inspection levels are selected from IEC 60410.
c
In this table,
p is the periodicity (in months);
n is the sample size;
c is the acceptance criterion (permitted number of non conforming items);
D is destructive
ND is non-destructive;
IL is the inspection level (IEC 60410).
d
When the detail specification indicates that a repetitive pressure-relief device is applied at the capacitor, the
effects of the intended operation of the pressure-relief device (for example, slight colouring or discolouring,
slight wetting, etc.) is not considered as leakage and/or visible damage. Seepage, however, is not permitted.
___________
– 18 – 60384-4-1 © CEI:2007
SOMMAIRE
AVANT-PROPOS.19
1 Données générales .23
1.1 Méthode(s) de montage recommandée(s) (à insérer).23
1.2 Dimensions .23
1.3 Caractéristiques et valeurs nominales .23
1.4 Références normatives.24
1.5 Marquage.24
1.6 Informations pour les commandes .24
1.7 Enregistrements certifiés de lots livrés .24
1.8 Informations supplémentaires (non destinées à l’inspection) .24
1.9 Sévérités ou exigences supplémentaires ou plus élevées que celles
spécifiées dans la spécification générique et/ou intermédiaire.24
2 Exigences d’inspection .25
2.1 Procédures.25

Tableau 1 – Référence de taille de boîtier et dimensions .23
Tableau 2 – Valeurs de capacité et de tension en fonction des tailles des boîtiers.23
Tableau 3 – Tangente de l’angle de perte, impédance et courant d’ondulation nominal.24
Tableau 4 – Autres caractéristiques .24
Tableau 5 – Plan d’essai pour le contrôle de conformité de la qualification .25

60384-4-1 © CEI:2007 – 19 –
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
CONDENSATEURS FIXES UTILISÉS
DANS LES ÉQUIPEMENTS ÉLECTRONIQUES –

Partie 4-1: Spécification particulière cadre –
Condensateurs fixes électrolytiques
à l’aluminium, à électrolyte non solide –
Niveau d’assurance EZ
AVANT-PROPOS
1) La Commission Électrotechnique Internationale (CEI) est une organisation mondiale de normalisation
composée de l’ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a
pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les
domaines de l’électricité et de l’électronique. A cet effet, la CEI – entre autres activités – publie des Normes
internationales, des Spécifications techniques, des Rapports techniques, des Spécifications accessibles au
public (PAS) et des Guides (ci-après dénommés "Publication(s) de la CEI"). Leur élaboration est confiée à des
comités d’études, aux travaux desquels tout Comité national intéressé par le sujet traité peut participer. Les
organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent
également aux travaux. La CEI collabore étroitement avec l’Organisation Internationale de Normalisation (ISO),
selon des conditions fixées par accord entre les deux organisations.
2) Les décisions ou accords officiels de la CEI concernant les questions techniques représentent, dans la mesure
du possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux de la CEI
intéressés sont représentés dans chaque comité d’études.
3) Les Publications de la CEI se présentent sous la forme de recommandations internationales et sont agréées
comme telles par les Comités nationaux de la CEI. Tous les efforts raisonnables sont entrepris afin que la CEI
s’assure de l’exactitude du contenu technique de ses publications; la CEI ne peut pas être tenue responsable
de l’éventuelle mauvaise utilisation ou interprétation qui en est faite par un quelconque utilisateur final.
4) Dans le but d’encourager l’uniformité internationale, les Comités nationaux de la CEI s’engagent, dans toute la
mesure possible, à appliquer de façon transparente les Publications de la CEI dans leurs publications
nationales et régionales. Toutes divergences entre toutes Publications de la CEI et toutes publications
nationales ou régionales correspondantes doivent être indiquées en termes clairs dans ces dernières.
5) La CEI n’a prévu aucune procédure de marquage valant indication d’approbation et n’engage pas sa
responsabilité pour les équipements déclarés conformes à une de ses Publications.
6) Tous les utilisateurs doivent s’assurer qu’ils sont en possession de la dernière édition de cette publication.
7) Aucune responsabilité ne doit être imputée à la CEI, à ses administrateurs, employés, auxiliaires ou
mandataires, y compris ses experts particuliers et les membres de ses comités d’études et des Comités
nationaux de la CEI, pour tout préjudice causé en cas de dommages corporels et matériels, ou de tout autre
dommage de quelque nature que ce soit, directe ou indirecte, ou pour supporter les coûts (y compris les frais
de justice) et les dépenses découlant de la publication ou de l’utilisation de cette Publication de la CEI ou de
toute autre Publication de la CEI, ou au crédit qui lui est accordé.
8) L’attention est attirée sur les références normatives citées dans cette publication. L’utilisation de publications
référencées est obligatoire pour une application correcte de la présente publication.
9) L’attention est attirée sur le fait que certains des éléments de la présente Publication de la CEI peuvent faire
l’objet de droits de propriété intellectuelle ou de droits analogues. La CEI ne saurait être tenue pour
responsable de ne pas avoir identifié de tels droits de propriété et de ne pas avoir signalé leur existence.
La Norme internationale CEI 60384-4-1 a été établie par le comité d’études 40 de la CEI:
Condensateurs et résistances pour équipements électroniques.
Cette troisième édition annule et remplace la deuxième édition publiée en 2000. Elle constitue
une révision mineure des tableaux, valeurs et références.
La présente version bilingue, publiée en 2008, correspond à la version anglaise.

– 20 – 60384-4-1 © CEI:2007
Le texte anglais de cette norme est issu des documents 40/1762/CDV et 40/1820/RVC.
Le rapport de vote 40/1820/RVC donne toute information sur le vote ayant abouti à
l’approbation de cette norme.
La version française de cette norme n’a pas été soumise au vote.
La présente publication a été rédigée selon les Directives ISO/CEI, Partie 2.
Le numéro QC qui figure sur la page de couverture de la présente publication est le numéro
de spécification dans le système d'assurance de la qualité des composants électroniques de
la CEI (IECQ).
La liste de toutes les parties de la série CEI 60384, présentée sous le titre général
Condensateurs fixes utilisés dans les équipements électroniques, est disponible sur site web
de la CEI.
Le comité a décidé que le contenu de cette publication ne sera pas modifié avant la date de
maintenance indiquée sur le site web de la CEI sous "http://webstore.iec.ch" dans les
données relatives à la publication recherchée. A cette date, la publication sera
• reconduite,
• supprimée,
• remplacée par une édition révisée, ou
• amendée.
60384-4-1 © CEI:2007 – 21 –
CONDENSATEURS FIXES UTILISÉS
DANS LES ÉQUIPEMENTS ÉLECTRONIQUES –

Partie 4-1: Spécification particulière cadre –
Condensateurs fixes électrolytiques
à l’aluminium, à électrolyte non solide –
Niveau d’assurance EZ
Spécification particulière cadre
Une spécification particulière cadre est un document annexe à la spécification intermédiaire
qui contient des exigences pour le modèle, la disposition et le contenu minimum des
spécifications particulières. Les spécifications particulières qui ne satisfont pas aux exigences
peuvent ne pas être considérées comme conformes aux spécifications de la CEI et ne doivent
pas être décrites comme telles.
Dans la préparation des spécifications particulières, le contenu de 1.4 de la spécification
intermédiaire doit être pris en compte.
Les numéros entre crochets de la première page correspondent aux informations suivantes
qui doivent être insérées à l’emplacement indiqué.
Identification de la spécification particulière
[1] La Commission Electrotechnique Internationale (CEI) ou l'organisation nationale de
normalisation sous l'autorité de laquelle la spécification particulière est rédigée.
[2] Le numéro de la spécification particulière des normes nationales ou des normes CEI, la
date d’édition et toute autre information requise par le système national.
[3] Le numéro et le numéro d’édition de la spécification générique nationale ou de la CEI.
[4] Le numéro CEI de la spécification particulière cadre.
Identification du condensateur
[5] Une courte description du type de condensateur.
[6] Les informations sur la construction typique (le cas échéant).
NOTE Lorsque le condensateur n’est pas destiné à des applications sur des cartes imprimées, la
spécification particulière l’indique clairement à cet endroit.
[7] Un schéma de présentation avec les principales dimensions nécessaires à
l'interchangeabilité et/ou une référence aux documents nationaux ou internationaux
relatifs à l’encombrement. En variante, ce schéma peut être annexé à la spécification
particulière.
[8] L’application ou le groupe d’applications couvertes et/ou le niveau d’assurance.
NOTE Les niveaux d’assurance à utiliser dans une spécification particulière sont sélectionnés au
Paragraphe 3.5.4 de la spécification
...