Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units

IEC 61587-5:2013 specifies seismic test requirements for chassis, subracks, and plug-in units as defined in the IEC 60297 and IEC 60917 series. It applies in whole or in part, only to the mechanical structures of chassis, subracks, and plug-in units for electronic equipment, according to the IEC 60297 and IEC 60917 series, and does not apply to electronic components, equipment or systems within the mechanical structures. The object of this standard is to establish a level of physical integrity of chassis, subracks, and plug-in units according to IEC 60297 and IEC 60917 series that may provide a level of survivability that will preserve functionality during and after a seismic occurrence. It is intended to provide the user with a high level of confidence in the selection of an equipment practice to meet such needs. Since IEC 60297 and IEC 60917 series chassis, subracks, and plug-in units come in many sizes, weights and mechanical complexities, it is not possible to define a single minimum seismic test requirement for all weight categories. Therefore, overall mass categories are defined in this standard. However, the mass distribution inside a chassis and subrack is considered "application-specific" and herein defined as "intended use". Key words: chassis, subracks, plug-in units, seismic tests

Structures mécaniques pour équipement électronique - Essais pour la CEI 60917 et la CEI 60297 - Partie 5: Essais sismiques pour châssis, bacs et unités enfichables

L'IEC 61587-5:2013 spécifie les exigences d'essai sismique pour les châssis, les bacs et les unités enfichables tels que définis dans les séries CEI 60297 et CEI 60917. Elle s'applique, en tout ou en partie, seulement aux structures mécaniques des châssis, des bacs et des unités enfichables pour les équipements électroniques, conformément aux séries CEI 60297 et CEI 60917, et ne s'applique pas aux équipements ou systèmes électroniques, aux équipements ou aux systèmes qui se trouvent à l'intérieur de ces structures mécaniques. L'objet de la présente norme est d'établir un niveau d'intégrité physique des châssis, des bacs et des unités enfichables, conformément aux séries CEI 60297 et CEI 60917, qui peut fournir un niveau de pérennité qui protégera la fonctionnalité pendant et après une occurrence sismique. L'objectif est d'aider l'utilisateur à mieux choisir une structure appropriée pour satisfaire à ses besoins spécifiques. Les châssis, les bacs et les unités enfichables décrits dans les CEI 60297 et CEI 60917 ont diverses tailles, poids et complexités mécaniques; aussi, on ne peut pas définir une seule exigence d'essai sismique minimum pour toutes les catégories de poids. Des catégories de masse globales sont donc définies dans cette norme. La distribution de masse à l'intérieur d'un châssis et d'un bac, toutefois considérée comme "spécifique à l'application", est ici définie dans son "utilisation prévue". Mots clés: châssis, bacs, unités enfichables, essai sismique

General Information

Status
Published
Publication Date
09-Dec-2013
Current Stage
PPUB - Publication issued
Start Date
31-Dec-2013
Completion Date
10-Dec-2013
Ref Project

Buy Standard

Standard
IEC 61587-5:2013 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units
English and French language
49 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61587-5 ®
Edition 1.0 2013-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Mechanical structures for electronic equipment – Tests for IEC 60917
and IEC 60297 –
Part 5: Seismic tests for chassis, subracks and plug-in units

Structures mécaniques pour équipement électronique – Essais pour la
CEI 60917 et la CEI 60297 –
Partie 5: Essais sismiques pour châssis, bacs et unités enfichables
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61587-5 ®
Edition 1.0 2013-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Mechanical structures for electronic equipment – Tests for IEC 60917

and IEC 60297 –
Part 5: Seismic tests for chassis, subracks and plug-in units

Structures mécaniques pour équipement électronique – Essais pour la

CEI 60917 et la CEI 60297 –
Partie 5: Essais sismiques pour châssis, bacs et unités enfichables

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 31.240 ISBN 978-2-8322-1300-1

– 2 – 61587-5 © IEC:2013
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope and object . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Equipment test categories . 8
5 Test waveform and acceleration condition . 9
5.1 General . 9
5.2 General conditions . 9
5.3 Single-axis acceleration . 9
5.4 Tri-axial acceleration . 10
5.5 Specimen monitoring . 12
5.6 Seismic simulation . 13
6 Test setup and parts to be monitored . 13
6.1 General . 13
6.2 Category A – Plug-in units . 13
6.2.1 General . 13
6.2.2 Plug-in unit simulated load . 13
6.2.3 Plug-in unit test setup onto the test fixture . 15
6.2.4 Plug-in unit test fixture setup to the vibration table . 17
6.2.5 Plug-in unit mechanical parts under test . 18
6.2.6 Vibration response monitoring . 18
6.2.7 Plug-in unit measurements . 18
6.2.8 Test sequence . 19
6.2.9 Plug-in unit electrical parts test (free and fixed connector) . 19
6.2.10 Acceptance criteria . 19
6.3 Category B – Chassis or subracks . 19
6.3.1 General . 19
6.3.2 Chassis or subrack simulated load . 20
6.3.3 Chassis or subrack test setup onto the vibration table . 21
6.3.4 Chassis or subrack mechanical parts under test . 21
6.3.5 Vibration response monitoring . 21
6.3.6 Chassis or subrack measurements . 22
6.3.7 Test sequence . 22
6.3.8 Acceptance criteria . 22
Annex A (informative) Example of test setup reporting . 23
A.1 Subrack test setup reporting . 23
A.2 Plug-in unit test setup reporting . 23
Bibliography . 24

Figure 1 – RRS for the test wave (single-axis acceleration)(damping ratio 2,0 %) . 10
Figure 2 – Time history of the test wave (single-axis acceleration) . 10
Figure 3 – RRS for the test wave (tri-axial acceleration)(damping ratio 3 %) . 11
Figure 4 – Time history of the test wave for each axis (tri-axial acceleration) . 12

61587-5 © IEC:2013 – 3 –
Figure 5 – Plug-in unit intended use A load distribution (discrete) . 14
Figure 6 – Plug-in unit intended use B load distribution (compact) . 15
Figure 7 – Plug-in unit test setup – Subrack . 16
Figure 8 – Plug-in unit test setup – Chassis with integrated subrack . 17
Figure 9 – Block diagram of the plug-in unit test setup . 18
Figure 10 – Chassis or subrack test setup . 20
Figure 11 – Block diagram of the chassis or subrack test setup . 21

– 4 – 61587-5 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
TESTS FOR IEC 60917 AND IEC 60297 –

Part 5: Seismic tests for chassis, subracks and plug-in units

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.