iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60893-3-3:1993

(Main)

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins

Gives the requirements for industrial rigid laminated sheets for electrical purposes based on melamine resins and different reinforcements (woven glass cloth and woven cotten cloth). The contents of the corrigenda of September 1995 and December 1997 have been included in this copy.

Spécification pour les stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 3: Prescriptions pour les stratifiés rigides en planches à base de résine mélamine

Donne les prescriptions pour les stratifiés industriels rigides en planches à usages électriques, à base de résine mélamine et de différents renforts (tissu de verre et tissu de coton). Le contenu des corrigendas de septembre 1995 et décembre 1997 a été pris en considération dans cet exemplaire.

General Information

Status
Published
Publication Date
14-Dec-1997
ICS
29.035.01 - Insulating materials in general
Technical Committee
TC 15 - Solid electrical insulating materials
Drafting Committee
WG 6 - TC 15/WG 6
Current Stage
DELPUB - Deleted Publication
Completion Date
17-Nov-2003
Ref Project

Relations

Revised
IEC 60893-3-3:2003 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
Effective Date
05-Sep-2023

Buy Standard

IEC 60893-3-3:1993/COR1:1995 - Corrigendum 1 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins Released:9/1/1995IEC 60893-3-3:1993/COR1:1995 - Corrigendum 1 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins Released:9/1/1995
PreviousNext
Standard
IEC 60893-3-3:1993/COR1:1995 - Corrigendum 1 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins Released:9/1/1995
English and French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
IEC 60893-3-3:1993/COR2:1997 - Corrigendum 2 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins Released:12/15/1997IEC 60893-3-3:1993/COR2:1997 - Corrigendum 2 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins Released:12/15/1997
PreviousNext
Standard
IEC 60893-3-3:1993/COR2:1997 - Corrigendum 2 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins Released:12/15/1997
English and French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC Publication 893-3-3
Publication 893-3-3 de la CEI
(First edition - 1993)
(Première édition - 1993)
Spécification pour les stratifiés industriels rigi- Specification for industrial rigid laminated
sheets based on thermosetting resins for
des en planches à base de résines thermo-
durcissables à usages électriques electrical purposes

Part 3:
Partie 3:
Specifications for individual materials –
Spécifications pour matériaux particuliers –

Sheet 3: Requirements for rigid laminated sheets based
Feuille 3: Prescriptions pour les stratifiés rigides en plan-

on melamine resins
ches
...


Publication 60893-3-3 de la CEI IEC Publication 60893-3-3

(Première édition – 1993) (First edition – 1993)

Spécification pour les stratifiés industriels Specification for industrial rigid laminated

rigides en planches sheets based on thermosetting resins

à base de résines thermodurcissables for electrical purposes –

à usages électriques –
Partie 3: Part 3:
Spécifications pour matériaux particuliers – Specifications for individual materials –

Feuille
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60893-2:2023(Main)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test

IEC 60893-2:2023 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1). This third edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) removal of reference to withdrawn specification IEC 60167:1964;
b) inclusion of reference to IEC 62631-3-3:2015, which supersedes IEC 60167:1964. Details in 6.3 have been updated accordingly. The actual performance of the test has not changed;
c) normative references have been updated.

  • Standard
    109 pages
    English language
    sale 15% off
  • Standard
    73 pages
    English and French language
    sale 15% off
IEC
IEC 60626-1:2023(Main)
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements

IEC 60626-1:2023 contains the definitions related to and the general requirements to be fulfilled by combined flexible materials for electrical insulation. This document does not include mica papers used as a primary component, which are covered by the IEC 60371 series, but insulation materials based on mica paper can be used as component of a combined flexible material. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the materials available for use within this series of standards have been updated;
b) a framework has been created to allow test methods beyond those used for quality control specifications to allow for testing for qualification purposes.

  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 60455-2:2023(Main)
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test

IEC 60455-2:2023 specifies methods of test to be used for testing resin based reactive compounds, their components and cured compounds used for electrical insulation. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Introduction of test methods related to IEC 60455-3-8;
b) Additional and updated test methods for resins.

  • Standard
    110 pages
    English language
    sale 15% off
  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC 60455-3-8:2021(Main)
Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories

IEC 60455-3-8:2021 gives the requirements for resins for power cable accessories that conform to this specification and meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not on this specification alone. These materials are designed to be used in low and medium voltage cable accessories and as such, electrical performance is proven as part of the assembly. Examples of this are described in EN 50393 and IEC 60502-4. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Clause 1: a link to assemblies according to IEC 60502-4 and EN 50393 was introduced;
- designation: the categories, especially the mechanical ones, were redefined;
- type tests: the testing was updated based on the chemical basis of the material;
- type tests: additional materials were introduced;
- Annex A: an examination grid was established.

  • Standard
    58 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English and French language
    sale 15% off
IEC
IEC 62677-3-103:2019(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications

IEC 62677-3-103:2019 is applicable to heat shrinkable low and medium voltage moulded shapes, conductive, in a range of configurations suitable for environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 ºC and 100 ºC. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will need to be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629 and IEC 60502 (all parts).
Keywords: heat shrinkable, polyolefin, conductive moulded shapes for medium voltage applications

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 62677-3-102:2018(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications

IEC 62677-3-102:2018 is applicable to heat shrinkable medium voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in IEC 60502 (all parts), EN 50393 and HD 629.
Keywords: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 62677-3-101:2018(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications

IEC 62677-3-101:2018 is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. The material is available in two types:
- Type A - Flame retardant
- Type B - Not flame retardant
Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and, as such, electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629 and IEC 60502-1.

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60370:2017(Main)
Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods

IEC 60370:2017 covers methods of test for the determination of thermal endurance (temperature index) of electrical insulating resins and varnishes for impregnation purposes. It is done by means of impregnating glass cloth and measuring electric strength or breakdown voltage before and after heat ageing. It covers the materials described in IEC 60455-3-5 and IEC 60464-3-2 and similar materials. This second edition cancels and replaces the first edition published in 1971. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- this document is now describing two methods, the existing one, following ASTM D1932 and new a method following the requirements of IEC 60455-2 and IEC 60464-2;
- the theoretical background and way of calculation were removed, and replaced by reference to IEC 60216;
- the layout and numbering system was updated;
- for better understanding and illustration purposes examples were added.
Keywords: thermal endurance testing

  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC 62677-2:2017(Main)
Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test

IEC 62677-2:2017 gives methods of test for heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and strain relief for connector/cable terminations and multi-way transitions.
The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629.1 and IEC 60502-4.

  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 62677-1:2017(Main)
Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements

IEC 62677-1:2017 is applicable to heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection, electrical conductance, anti-tracking and strain relief for power cable terminations, joints and stop ends. It specifies the test methods and material requirements. The most commonly available shapes are as shown in the Annex A. Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone. These moulded shapes are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629.1 and IEC 60502-4.

  • Standard
    20 pages
    English and French language
    sale 15% off