iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60068-2-18:1989

(Main)

Environmental testing - Part 2-18: Tests - Test R and guidance: Water

Environmental testing - Part 2-18: Tests - Test R and guidance: Water

Provides tests for electrotechnical products which, during transportation, storage or in service, may be subjected to falling drops, impacting water or immersion.

Essais d'environnement - Partie 2-18: Essais - Essai R et guide: Eau

Indique les méthodes d'essais applicables aux produits électrotechniques qui, pendant leur transport, leur stockage ou alors qu'ils sont en service, peuvent être soumis à des chutes d'eau, à des projections d'eau ou à une immersion.

General Information

Status
Published
Publication Date
31-Mar-1993
ICS
19.040 - Environmental testing
Technical Committee
TC 104 - Environmental conditions, classification and methods of test
Current Stage
DELPUB - Deleted Publication
Completion Date
13-Oct-2000
Ref Project

Relations

Revised
IEC 60068-2-18:2000 - Environmental testing - Part 2-18: Tests - Test R and guidance: Water
Effective Date
05-Sep-2023

Buy Standard

IEC 60068-2-18:1989/AMD1:1993/COR1:1993 - Corrigendum 1 - Environmental testing - Part 2: Tests. Test R and guidance: Water Released:4/1/1993IEC 60068-2-18:1989/AMD1:1993/COR1:1993 - Corrigendum 1 - Environmental testing - Part 2: Tests. Test R and guidance: Water Released:4/1/1993
PreviousNext
Standard
IEC 60068-2-18:1989/AMD1:1993/COR1:1993 - Corrigendum 1 - Environmental testing - Part 2: Tests. Test R and guidance: Water Released:4/1/1993
English and French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC Publication 68-2-18, Amend. 1
Publication 68-2-18, amend. 1 de la CEI

(First edition - 1993)
(Première édition - 1993)
ESSAIS D’ENVIRONNEMENT ENVIRONMENTAL TESTING

Deuxième partie: Essais Part 2: Tests

Test R and guidance: Water
Essai R et guide: Eau
C O R R I G E N D U M
Page 6
Remplacer le tableau V.2 par le nouveau tableau V.2 suivant corrigé:
Sévérités
Diamètre de l’orifice Débit d’eau Pression d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60721-3-2:2018/COR3:2024(Corrigendum)
Corrigendum 3 - Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and handling
  • Standard
    2 pages
    English and French language
    sale 15% off
IEC
IEC 60721-3-9:2024(Main)
Classification of environmental conditions - Part 3-9: Classification of groups of environmental parameters and their severities - Microclimates inside products

IEC 60721-3-9:2024 classifies groups of microclimatic conditions, to which components (basic parts, assemblies, built-in units) can be subjected inside products, which are used under the climatic conditions as classified in IEC 60721-3-3 and IEC 60721-3-4.
This second edition cancels and replaces the first edition published in 1993, Amendment 1:1994 and Corrigendum 1:1995. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 2 has been updated;
b) Clause 4 has been re-edited and simplified;
c) Annex A has been revised and updated;
d) a new Annex B has been added and gives the origin of the constitutional diagram for humid air, which is the basis of drawing the climatogram for a microclimate.

  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-86:2024(Main)
Environmental testing - Part 2-86: Tests -Test Fx: Vibration - Multi-exciter and multi-axis method

IEC 60068-2-86:2024 provides a test procedure for use with multi-exciter and multi-axis vibration test systems. The vibration test is intended for general application to components, equipment, and other products, hereinafter referred to as "specimens", subjected to dynamic environments that could arise during an equipment life cycle. Although this document is mainly intended for vibration testing, the procedure is also applied to certain types of shock and transient tests.

  • Standard
    79 pages
    English and French language
    sale 15% off
IEC
IEC 60721-2-6:2022/COR1:2023(Corrigendum)
Corrigendum 1 - Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock

IEC 60721-2-6:2022 deals with environmental conditions appearing in nature related to earthquake vibrations and shocks.
Its object is to define some fundamental properties and quantities for characterization of earthquakes as background material for the severities to which products are liable to be exposed during storage and use. The accelerations given are for ground surface conditions only. Conditions related to structures are referred to but restricted to general case descriptions.
This second edition cancels and replaces the first edition published in 1990. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
the main aim of this revision is to classify in a limited number of classes the seismic activity level of the zone where the equipment could be installed;
the correlation between intensity scales, magnitude scales and peak ground acceleration is deleted due to the scientific uncertainty to define such a correlation in a rigorous way;
updated scales are given both for intensity and for magnitude;
the earthquake zone map, which was not usable in practice, is replaced by an annex giving information about how to retrieve consistent peak ground acceleration distribution all over the world;
with regard to identification of the peak ground seismic acceleration of the zone, where the equipment could be installed, the user is made aware that national standards and laws can apply.

  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC TS 60721-4-3:2023(Main)
Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations

IEC TS 60721-4-3:2023 This part of IEC 60721 deals with the correlation and transformation of the conditions given in IEC 60721-3-3 to the environmental test procedures defined in IEC 60068-2.
This document provides test procedures and test severities for electrotechnical equipment operated at stationary weatherprotected locations for the product classes set out in IEC 60721-3-3.
This first edition cancels and replaces IEC TR 60721-4-3:2001 and IEC TR 60721-4-3:2001/AMD1:2003. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC TR 60721-4-3:2001 and IEC TR 60721-4-3:2001/AMD1:2003:
a) the document has been totally reworked;
b) all figures have been removed, except in Annex A;
c) severities have been aligned with those of IEC 60721-3-3:2019.

  • Technical specification
    19 pages
    English language
    sale 15% off
IEC
IEC 60068-2-14:2023(Main)
Environmental testing - Part 2-14: Tests - Test N: Change of temperature

IEC 60068-2-14:2023 provides tests with specified ambient temperature changes to analyse their impacts on specimens. This seventh edition cancels and replaces the sixth edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) updating of the figures for clarification purposes;
b) updating of specimen temperature(s) and severities as well as tolerances for change of temperature tests;
c) revision of standardized requirements for test reports for Tests Na and Nb.

  • Standard
    111 pages
    English language
    sale 15% off
  • Standard
    70 pages
    English and French language
    sale 15% off
IEC
IEC 60721-3-4:2019/COR1:2023(Corrigendum)
Corrigendum 1 - Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations
  • Standard
    4 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-1:2023(Main)
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests

IEC 60068-3-1:2023 provides guidance regarding the performance of cold and dry heat tests. This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) information relating to specimen temperatures has been revised;
b) information relating to tests of multiple specimens has been revised;
c) the effect of air density has been added;
d) a recommendation for corrective actions regarding IR radiation has been added;
e) the requirements for the mounting and supports of the specimen have been revised.

  • Standard
    44 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 60068-3-4:2023(Main)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests

IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the requirements for distilled and deionized water have been revised;
b) recommendations for the cleaning procedure of test chambers have been included;
c) humidification systems (ultrasonic humidifiers and atomizers) have been added;
d) the description of water penetration mechanisms has been refined.

  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC 60068-2-17:2023(Main)
Environmental testing - Part 2-17: Tests - Test Q: Sealing

IEC 60068-2-17:2023 deals with seal tests applicable to the external and internal detection in container sealing of gross leaks and fine leaks to determine the effectiveness of seals of specimens. For further tests to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order, IEC 60068‑2‑18 can be helpful.
This fifth edition cancels and replaces the fourth edition published in 1994. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) "Survey of sealing tests" has been deleted and the relevant content moved to a new Clause 4 "General";
b) the Scope has been revised;
c) the figures have been updated for clarification purposes;
d) all non-SI units have been removed;
e) the information to be given in the relevant specification has been revised.

  • Standard
    101 pages
    English and French language
    sale 15% off