IEC 60364-7-704

Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

The special requirements of this part apply to temporary installations for construction and demolition sites during the period of the construction or demolition work, including for example the following:[
]- construction work of new buildings;[
]- repair, alteration, extension, demolition of existing buildings or parts of existing buildings;[
]- engineering works;[
]- earthworks;[
]- work of similar nature.[
]The requirements apply to fixed or moveable installations.

Installations électriques basse tension - Partie 7-704: Exigences pour les installations ou emplacements spéciaux - Installations de chantiers de construction et de démolition

Les exigences particulières de la présente partie s'appliquent aux installations temporaires pour chantiers de  construction et de démolition pendant la période de construction ou de démolition, incluant par exemple ce qui suit:[
]- les travaux de construction de nouveaux bâtiments; [
]- les travaux de réparation, de modification, d'extension ou de démolition de bâtiments existants;[
]- les travaux publics;[
]- les travaux de terrassement;[
]- et les travaux analogues.[
]Les exigences s'appliquent aux installations fixes ou mobiles.

Nizkonapetostne električne inštalacije – 7-704. del: Zahteve za posebne inštalacije ali lokacije – Gradbišča

General Information

• Status: Not Published
• ICS: 29.020 - Electrical engineering in general
• ICS: 91.140.50 - Electricity supply systems
• Technical Committee: TC 64 - Electrical installations and protection against electric shock
• Current Stage: PPUB - Publication issued
• Start Date: 19-Oct-2005
• Ref Project: SIST IEC 60364-7-704:2006 - Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Installations électriques basse tension - Partie 7-704: Exigences pour les installations ou emplacements spéciaux - Installations de chantiers de construction et de démolitionLow-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations91.200Gradbena tehnologijaCon
...

SIST IEC 60364-7-704:2006SLOVENSKIseptember 2006
STANDARDNizkonapetostne električne inštalacije – 7-704. del: Zahteve za posebne inštalacije ali lokacije – GradbiščaLow-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST IEC 60364-7-704:2006(en)ICS91.140.50; 91.200







NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 60364-7-704Deuxième éditionSecond edition2005-10 Installations électriques basse tension – Partie 7-704: Exigences pour les installations ou emplacements spéciaux – Installations de chantiers de construction et de démolition
Low-voltage electrical installations – Part 7-704: Requirements for special
installations or locations – Construction and demolition
site installations Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés

Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone] Telefax: [phone] E-mail: [e-mail]
Web: www.iec.ch CODE PRIX PRICE CODE J Commission Electrotechnique InternationaleInternational Electrotechnical Commission



60364-7-704  IEC:2005 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 7-704: Requirements for special installations or locations – Construction and demolition site installations
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60364-7-704 has been prepared by IEC technical committee 64: Electrical installations and protection against electric shock. This second edition cancels and replaces the first edition published in 1989 and constitutes a technical revision.
The main changes with respect to the previous edition are as follows: – circuits supplying 32 A rating or less socket-outlets, as well as the socket-outlets are to be protected by 30 mA RCDs; – circuits supplying socket-outlets over 32 A rating to be protected by 500 mA RCDs.



60364-7-704  IEC:2005 – 5 –
The text of this standard is based on the following documents: FDIS Report on voting 64/1477/FDIS 64/1492/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. IEC 60364 consists of the following parts, under the general title Low-voltage electrical installations: Part 1: Fundamental principles, assessment of general characteristics, definitions Part 2: Void Part 3: Void Part 4: Protection for safety Part 5: Selection and erection of electrical equipment Part 6: Verification Part 7: Requirements for special installations or locations
The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed; • withdrawn; • replaced by a revised edition, or • amended.



60364-7-704  IEC:2005 – 7 –
INTRODUCTION The requirements of this part of IEC 60364 supplement, modify or replace certain of the general requirements of the other parts of IEC 60364.
The clause numbering of part 704 follows the pattern and corresponding references of IEC 60364. The numbers following the particular number of part 704 are those of the corresponding parts, or clauses of IEC 60364.
The absence of reference to a part, a clause or a subclause means that the corresponding general requirements are applicable.



60364-7-704  IEC:2005 – 9 –
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 7-704: Requirements for special installations or locations –
Construction and demolition site installations
704.1 Scope The following requirements are added: 704.1.1 The special requirements of this part apply to temporary installations for construction and demolition sites during the period of the construction or demolition work, including for example the following: – construction work of new buildings; – repair, alteration, extension, demolition of existing buildings or parts of existing buildings; – engineering works; – earthworks; – work of similar nature. The requirements apply to fixed or moveable installations. The rules do not apply to – installations covered by the IEC 60621 series 1), where equipment of a similar nature to that used in surface mining applications is involved; – installations in administrative locations of construction sites (offices, cloakrooms, meeting rooms, canteens, restaurants, dormitories, toilets, etc.) where the general rules of Parts 1 to 6 of IEC 60364 apply. NOTE For special situations, more severe requirements apply, e.g. part 706 2) for conductive locations with restricted movement. 704.2 Normative references The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendement) applies.
IEC 60245-4, Rubber insulated cables – Rated voltages upto and including 450/750 V – Part 4: Cords and flexible cables IEC 60309-1, Plugs, socket-outlets and couplers for industrial purposes – Part 1: General requirements IEC 60309-2, Plugs, socket-outlets and couplers for industrial purposes – Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories ___________ 1)
IEC 60621 (all parts), Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries) 2)
IEC 60364-7-706:, Lo
...