IEC 62769-101-1:2020

Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1

IEC 62769-101-1:2020 specifies the IEC 62769 profile for IEC 61784 1_CP 1/1 (FOUNDATION™ Fieldbus H1) .

Intégration des appareils de terrain (FDI) - Partie 101-1: Profils - Foundation Fieldbus H1

L’IEC 62769-101-1:2020 spécifie le profil de l'IEC 62769 pour le profil de communication CP 1/1 (FOUNDATION™ Fieldbus H1) défini dans l'IEC 61784-1.

General Information

• Status: Published
• Publication Date: 18-Nov-2020
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: SC 65E - Devices and integration in enterprise systems
• Drafting Committee: WG 7 - TC 65/SC 65E/WG 7
• Current Stage: DELPUB - Deleted Publication
• Start Date: 28-Jan-2022
• Completion Date: 14-Apr-2023

Relations

• Revises: IEC 62769-101-1:2015 - Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1
• Effective Date: 05-Sep-2023
• Revised: IEC 62769-101-1:2023 - Field device Integration (FDI)® - Part 101-1: Profiles - Foundation Fieldbus H1
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62769-101-1 ®
Edition 2.0 2020-11
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Field device integration (FDI) –
Part 101-1: Profiles – Foundation Fieldbus H1

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: [e-mail].
IEC 62769-101-1 ®
Edition 2.0 2020-11
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Field device integration (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9104-7

– 2 – IEC 62769-101-1:2020 RLV © IEC 2020

CONTENTS
FOREWORD . 4

INTRODUCTION .

1 Scope . 7

2 Normative references . 7

3 Terms, definitions, abbreviated terms and conventions . 8

3.1 Terms and definitions . 8

3.2 Abbreviated terms . 8
3.3 Conventions . 8
3.3.1 EDDL syntax. 8
3.3.2 XML syntax . 8
3.3.3 Capitalizations . 8
4 Profile for CP 1/1 (FOUNDATION™ H1) . 9
4.1 General . 9
4.2 Catalog profile . 9
4.2.1 Protocol support file . 9
4.2.2 CommunicationProfile definition . 9
4.2.3 Profile device . 10
4.2.4 Protocol version information . 10
4.3 Associating a Package with a CP 1/1 device . 10
4.3.1 Device type identification mapping . 10
4.3.2 Device type revision mapping . 10
4.4 Information Model mapping . 10
4.4.1 ProtocolType definition . 10
4.4.2 DeviceType mapping . 11
4.4.3 FunctionalGroup Identification definition . 11
4.4.4 BlockType property mapping . 12
4.4.5 Mapping to Block ParameterSet . 12
4.5 Topology elements . 12
4.5.1 ConnectionPoint definition . 12
4.5.2 Communication Device definition . 14
4.5.3 Communication service provider definition . 16
4.5.4 Network definition . 16

4.6 Methods . 17
4.6.1 Methods for FDI Communication Servers . 17
4.6.2 Methods for Gateways . 24
Annex A (normative) Topology scan schema . 25
A.1 General . 25
A.2 FoundationH1AddressT . 25
A.3 FoundationH1ConnectionPointT . 25
A.4 FoundationH1NetworkT . 26
A.5 Network . 26
A.6 FoundationBlockIdentificationT . 27
A.7 FoundationIdentificationT . 27
Annex B (normative) Transfer service parameters . 29
B.1 General . 29
B.2 receiveData . 29

B.3 sendData . 29

B.4 OperationT . 30

B.5 ResponseCodeT . 30

B.6 TransferResultDataT . 30

B.7 TransferSendDataT . 31

Annex C (informative) Communication service arguments for Transfer Method . 32

Bibliography . 33

Table 1 – Capability File part . 9

Table 2 – CommunicationProfile definition . 10
Table 3 – Device type catalog mapping . 10
Table 4 – ProtocolType Foundation_H1 definition . 11
Table 5 – Inherited DeviceType Property mapping . 11
Table 6 – Identification Parameters . 11
Table 7 – Inherited BlockType property mapping. 12
Table 8 – ConnectionPointType ConnectionPoint_Foundation_H1 definition . 13
Table 9 – Communication device ParameterSet definition . 15
Table 10 – Method Connect arguments . 18
Table 11 – Method Disconnect arguments . 19
Table 12 – Method Transfer arguments . 19
Table 13 – Method GetPublishedData arguments. 21
Table 14 – Method SetAddress arguments . 23
Table A.1 – Attributes of FoundationH1ConnectionPointT . 26
Table A.2 – Elements of FoundationH1ConnectionPointT . 26
Table A.3 – Elements of FoundationH1NetworkT . 26
Table A.4 – Attributes of FoundationBlockIdentificationT. 27
Table A.5 – Attributes of FoundationIdentificationT . 28
Table B.1 – Elements of receiveData . 29
Table B.2 – Enumerations of OperationT . 30
Table B.3 – Attributes of ResponseCodeT . 30
Table B.4 – Attributes of TransferResultDataT . 31
Table B.5 – Attributes of TransferSendDataT . 31

– 4 – IEC 62769-101-1:2020 RLV © IEC 2020

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
FIELD DEVICE INTEGRATION (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent poss
...

IEC 62769-101-1 ®
Edition 2.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field device integration (FDI) –
Part 101-1: Profiles – Foundation Fieldbus H1

Intégration des appareils de terrain (FDI) –
Partie 101-1: Profils – Foundation Fieldbus H1

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 62769-101-1 ®
Edition 2.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field device integration (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1

Intégration des appareils de terrain (FDI) –

Partie 101-1: Profils – Foundation Fieldbus H1

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9065-1

– 2 – IEC 62769-101-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and conventions . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 7
3.3 Conventions . 7
3.3.1 EDDL syntax. 7
3.3.2 XML syntax . 7
3.3.3 Capitalizations . 7
4 Profile for CP 1/1 (FOUNDATION™ H1) . 8
4.1 General . 8
4.2 Catalog profile . 8
4.2.1 Protocol support file . 8
4.2.2 CommunicationProfile definition . 8
4.2.3 Profile device . 8
4.2.4 Protocol version information . 8
4.3 Associating a Package with a CP 1/1 device . 9
4.3.1 Device type identification mapping . 9
4.3.2 Device type revision mapping . 9
4.4 Information Model mapping . 9
4.4.1 ProtocolType definition . 9
4.4.2 DeviceType mapping . 9
4.4.3 FunctionalGroup Identification definition . 10
4.4.4 BlockType property mapping . 10
4.4.5 Mapping to Block ParameterSet . 11
4.5 Topology elements . 11
4.5.1 ConnectionPoint definition . 11
4.5.2 Communication Device definition . 13
4.5.3 Communication service provider definition . 14
4.5.4 Network definition . 15
4.6 Methods . 16
4.6.1 Methods for FDI Communication Servers . 16
4.6.2 Methods for Gateways . 21
Annex A (normative) Topology scan schema . 22
A.1 General . 22
A.2 FoundationH1AddressT . 22
A.3 FoundationH1ConnectionPointT . 22
A.4 FoundationH1NetworkT . 23
A.5 Network . 23
A.6 FoundationBlockIdentificationT . 24
A.7 FoundationIdentificationT . 24
Annex B (normative) Transfer service parameters . 26
B.1 General . 26
B.2 receiveData . 26
B.3 sendData . 26

B.4 OperationT . 27
B.5 ResponseCodeT . 27
B.6 TransferResultDataT . 27
B.7 TransferSendDataT . 28
Annex C (informative) Communication service arguments for Transfer Method . 29
Bibliography . 30

Table 1 – Capability File part . 8
Table 2 – CommunicationProfile definition . 8
Table 3 – Device type catalog mapping . 9
Table 4 – ProtocolType Foundation_H1 definition . 9
Table 5 – Inherited DeviceType Property mapping . 10
Table 6 – Identification Parameters . 10
Table 7 – Inherited BlockType property mapping. 11
Table 8 – ConnectionPointType ConnectionPoint_Foundation_H1 definition . 11
Table 9 – Communication device ParameterSet definition . 14
Table 10 – Method Connect arguments . 16
Table 11 – Method Disconnect arguments . 17
Table 12 – Method Transfer arguments . 18
Table 13 – Method GetPublishedData arguments. 19
Table 14 – Method SetAddress arguments . 21
Table A.1 – Attributes of FoundationH1ConnectionPointT . 23
Table A.2 – Elements of FoundationH1ConnectionPointT . 23
Table A.3 – Elements of FoundationH1NetworkT . 23
Table A.4 – Attributes of FoundationBlockIdentificationT. 24
Table A.5 – Attributes of FoundationIdentificationT . 25
Table B.1 – Elements of receiveData . 26
Table B.2 – Enumerations of OperationT .
...