WG 7 - TC 65/SC 65E/WG 7

IEC 62769-150-1:2023 is available as IEC 62769-150-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-150-1:2023 specifies an FDI profile of IEC 62769 for IEC 62734 (ISA100.11a)[1].
[1] ISA100 WIRELESSTM is a trade name of the non-profit consortium Wireless Compliance Institute. This information is given for the convenience of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-109-1:2023 is available as IEC 62769-109-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-109-1:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784‑1_CP 9/1 (HART®)[2] and IEC 61784‑1_CP 9/2 (WirelessHART®)[3].
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
[2] HART is the trade name of the non-profit consortium FieldComm Group. This information is given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
[3] WirelessHART is the trade name of the non-profit consortium FieldComm Group. This information is given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-103-4:2023 is available as IEC 62769-103-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-103-4:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784-2_CP 3/4, IEC 61784-2_CP3/5 and IEC 61784-2_CP3/6 (PROFINET[2]).
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
[2] PROFINET is the trade name of the non-profit consortium PROFIBUS & PROFINET International. This information is given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-103-1:2023 is available as IEC 62769-103-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-103-1:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784-1_CP 3/1 (PROFIBUS DP)[2] and IEC 61784-1_CP3/2 (PROFIBUS PA).
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
[2] PROFIBUS is the trade name of the non-profit consortium PROFIBUS & PROFINET International. This information is given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-101-2:2023 is available as IEC 62769-101-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-101-2:2023 specifies the IEC 62769 profile for IEC 61784‑1, CP 1/2 (Foundation™ Fieldbus HSE)[1].
[1] Foundation™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information is given for the convenience of users of this technical report and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-151-1:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑7 for the OPC UA protocol.

IEC 62769-6-100:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User Interface Plug-in (UIP) using the Runtime .NET. This runtime is specific only to the WORKSTATION platform as defined in IEC 62769‑4.
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-6-200:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User Interface Plug-in (UIP) for the Runtime HTML5.
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-101-1:2023 is available as IEC 62769-101-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-101-1:2023 specifies an FDI®[1] profile of IEC 62769 for IEC 61784‑1_CP 1/1 (Foundation™ Fieldbus H1)[2].
[1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
[2] Foundation™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information is given for the convenience of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-102-2:2023 defines the protocol-specific definitions (PSDs) as defined in IEC 62769‑100 (annex on generic protocol extensions) for the Ethernet/IP protocol.

IEC 62769-100:2023 is available as IEC 62769-100:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-100:2023 specifies an FDI®[1] profile of IEC 62769 for Generic Protocols. That means that all interfaces are defined and a host can add support for more protocols without changing its implementation. Nevertheless, there are some protocol specific definitions (PSD) that need to be specified per protocol using this profile. Annex C specifies what PSD need to be defined per protocol so that FDI® Device Packages, FDI® Communication Packages for Gateways and FDI® Communication Servers, FDI® Communication Server, Gateways and Devices supporting such a protocol can work together in a host not aware about this specific protocol.

IEC 62769-6:2023 is available as IEC 62769-6:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-6:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation of the components FDI® Client and User Interface Plug-in (UIP) in the specified technologies for the WORKSTATION platform and the MOBILE platform as defined in IEC 62769-4. There are individual subparts for the currently supported technologies .NET and HTML5.

IEC 62769-7:2023 is available as IEC 62769-7:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-7:2023 specifies the elements implementing communication capabilities called Communication Devices. The overall FDI®[1] architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this illustration. The document scope with respect to FDI® Packages is limited to Communication Devices. The Communication Server shown in Figure 1 is an example of a specific Communication Device.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-8:2023 specifies how the internal view of a device model represented by the EDD can be transferred into an external view as an OPC-UA information model by mapping EDD constructs to OPC-UA objects.

IEC 62769-4:2023 is available as IEC 62769-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-4:2023 specifies the FDI®[1] Packages. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in Architecture diagram figure.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-5:2023 is available as IEC 62769-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-5:2023 defines the FDI®[1] Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore, it represents the devices of the automation system as well as the connecting communication networks including their properties, relationships, and the operations that can be performed on them. The types in the AddressSpace of the FDI® Server constitute some kind of catalogue, which is built from FDI® Packages. The fundamental types for the FDI® Information Model are well defined in OPC UA for Devices (IEC 62541‑100). The FDI® Information Model specifies extensions for a few special cases and otherwise explains how these types are used and how the contents are built from elements of DevicePackages.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-3:2023 is available as IEC 62769-3:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-3:2023 specifies the FDI®[1] Server. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure. Annex A provides a functional description of the FDI® Server.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-1:2023 is available as IEC 62769-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-1:2023 describes the concepts and overview of the Field Device Integration (FDI®[1]) specifications. The detailed motivation for the creation of this technology is also described . Reading this document is helpful to understand the other parts of this multi-part standard.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-2:2023 is available as IEC 62769-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-2:2023 specifies the FDI®[1] Client. See Annex C for some typical FDI® Client use cases. The overall FDI® architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in Figure 1.
[1] FDI® is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

IEC 62769-4:2021 is available as IEC 62769-4:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-4:2021 specifies the FDI Packages. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in Figure 1.

IEC 62769-1:2021 is available as IEC 62769-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-1:2021 describes the concepts and overview of the Field Device Integration (FDI) specifications. The detailed motivation for the creation of this technology is also described (see 4.1). Reading this document is helpful to understand the other parts of this multi-part standard.

IEC 62769-7:2021 is available as IEC 62769-7:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-7:2021 specifies the elements implementing communication capabilities called Communication Devices (IEC 62769-5).
The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this illustration. The document scope with respect to FDI Packages is limited to Communication Devices. The Communication Server shown in Figure 1 is an example of a specific Communication Device.

IEC 62769-5:2021 is available as IEC 62769-5:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-5:2021 defines the FDI Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore, it represents the devices of the automation system as well as the connecting communication networks including their properties, relationships, and the operations that can be performed on them. The types in the AddressSpace of the FDI Server constitute a catalogue, which is built from FDI Packages. The fundamental types for the FDI Information Model are well defined in OPC UA for Devices (IEC 62541-100). The FDI Information Model specifies extensions for a few special cases and otherwise explains how these types are used and how the contents are built from elements of DevicePackages. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this illustration.

IEC 62769-3:2021 is available as IEC 62769-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-3:2021 specifies the FDI Server. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

IEC 62769-6:2021 is available as IEC 62769-6:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-6:2021 specifies the technology mapping for the concepts described in the Field Device Integration (FDI) standard. The technology mapping focuses on implementation regarding the components FDI Client and User Interface Plug-in (UIP) that are specific only to the WORKSTATION platform/.NET as defined in IEC 62769-4.

IEC 62769-2:2021 is available as IEC 62769-2:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-2:2021 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

IEC 62769-150-1:2021 specifies an FDI profile for IEC 62734 (ISA100 WIRELESS)

IEC 62769-101-1:2020 is available as IEC 62769-101-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-101-1:2020 specifies the IEC 62769 profile for IEC 61784 1_CP 1/1 (FOUNDATION™ Fieldbus H1) .

IEC 62769-101-2:2020 is available as IEC 62769-101-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-101-2:2020 specifies the IEC 62769 profile for IEC 61784 1, CP 1/2 (FOUNDATION™ Fieldbus HSE).

IEC 62769-115-2:2020 defines the protocol-specific definitions (PSDs) as defined in IEC 62769-7 on generic protocol extensions for the Modbus® -RTU protocol in accordance with CPF 15 in IEC 61784 2.

IEC 62769-100:2020 specifies an FDI profile of IEC 62769 for generic protocols. That means that all interfaces are defined, and a host can add support for more protocols without changing its implementation. Nevertheless, there are some protocol-specific definitions (PSD) that need to be specified per protocol using this profile. Annex C specifies what PSDs need to be defined per protocol so that FDI Device Packages, FDI Communication Packages for Gateways and FDI Communication Servers, FDI Communication Servers, Gateways and Devices supporting such a protocol can work together in a host not aware about this specific protocol.

IEC 61804-4:2020 specifies EDD interpretation for EDD applications and EDDs to support EDD interoperability. This document is intended to ensure that field device developers use the EDDL constructs consistently and that the EDD applications have the same interpretations of the EDD. It supplements the EDDL specification to promote EDDL application interoperability and improve EDD portability between EDDL applications. This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision.
This edition was developed by merging material from multiple variants of existing EDDL specifications including those from FieldComm Group (Foundation™ Fieldbus , HART® ), PROFIBUS™ Nutzerorganisation e.V. (PNO), and ISA100_Wireless™ Compliance Institute (ISA100 WCI). When a profile deviation exists, it is now indicated in the context where the related deviation is found. As a result, the formatting and numbering of this edition may be different from any of the individual specifications from which this edition was derived.
This edition includes the following significant technical changes with respect to the previous edition:
• communication profiles ISA100 and GPE were added;
• description of rules for optimized-column-width layout have been added;
• description of the concatenation of labels and help was added;
• color banding for meter type charts was added.

IEC 61804-5:2020 specifies the EDDL builtin library and provides the profiles of the various fieldbuses.
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision.
This edition was developed by merging material from multiple variants of existing EDDL specifications including those from FieldComm Group (Foundation™ Fieldbus , HART® ), PROFIBUS™ Nutzerorganisation e.V. (PNO), and ISA100_Wireless™ Compliance Institute (ISA100 WCI). As a result, the formatting and numbering of this edition may be different from any of the individual specifications from which this edition was derived.
This edition includes the following significant technical changes with respect to the previous edition:
• Communication profiles ISA100 and GPE were added.
• The following builtins have been deprecated:
– ABORT_ON_NO_DEVICE
– IGNORE_NO_DEVICE
– RETRY_ON_NO_DEVICE
– XMTR_ABORT_ON_NO_DEVICE
– XMTR_IGNORE_NO_DEVICE
– XMTR_RETRY_ON_NO_DEVICE
– get_status_code_string

IEC 61804-3:2020 specifies the electronic device description language (EDDL) technology, which enables the integration of real product details using the tools of the engineering life cycle.
This document specifies EDDL as a generic language for describing the properties of automation system components. EDDL is capable of describing
• device parameters and their dependencies;
• device functions, for example, simulation mode, calibration;
• graphical representations, for example, menus;
• interactions with control devices;
• graphical representations:
– enhanced user interface,
– graphing system;
• persistent data store.
EDDL is used to create electronic device description (EDD) for e.g. concrete devices, common usable profiles or libraries. This EDD is used with appropriate tools to generate an interpretative code to support parameter handling, operation, and monitoring of automation system components such as remote I/Os, controllers, sensors, and programmable controllers. Tool implementation is outside the scope of this document.
This document specifies the semantic and lexical structure in a syntax-independent manner. A specific syntax is defined in Annex A, but it is possible to use the semantic model also with different syntaxes.
IEC 61804-4 specifies EDD interpretation for EDD applications and EDDs to support EDD interoperability.
IEC 61804-5 specifies the EDDL builtin library and provides the profiles of the various fieldbuses.
This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision.
This edition was developed by merging material from multiple variants of existing EDDL specifications including those from FieldComm Group (FOUNDATION™ Fieldbus , HART® ), PROFIBUS™ Nutzerorganisation e.V. (PNO), and ISA100_Wireless™ Compliance Institute (ISA100 WCI). Any places where there may be a profile deviation are now indicated in the context where the related deviation is found. As a result, the formatting and numbering of this edition may be different from any of the individual specifications from which this edition was derived.
This edition includes the following significant technical changes with respect to the previous edition:
• Communication profiles ISA100 and GPE were added.
• EDD Identification Information has a new LAYOUT_TYPE attribute.
• New construct SEMANTIC_MAP was added.
• CLASS attribute values LOCAL_A and LOCAL_B were added.
• Extended LIST functionality to support device managed lists.

IEC 62769-103-4:2020 is available as IEC 62769-103-4:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62769-103-4:2020 specifies an FDI profile of IEC 62769 for IEC 61784-2_CP 3/4, IEC 61784-2_CP3/5 and IEC 61784-2_CP3/6 (PROFINET). This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) support for generic protocol extension for faster adoption of other technologies;
b) support for Package Developers to build EDDs targeted for today’s EDD bases system under a single development tool.

IEC 62769-103-1:2020 is available as IEC 62769-103-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-103-1:2020 specifies an FDI profile of IEC 62769 for IEC 61784 1_CP 3/1 (PROFIBUS DP) and IEC 61784 1_CP3/2 (PROFIBUS PA). This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) support for generic protocol extension for faster adoption of other technologies;
b) support for Package Developers to build EDDs targeted for today’s EDD bases system under a single development tool.

IEC 62769-109-1:2020 is available as IEC 62769-109-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62769-109-1:2020 specifies an FDI profile of IEC 62769 for IEC 61784 1_CP 9/1 (HART®) and IEC 61784 1_CP 9/2 (WirelessHART®). This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) support for generic protocol extension for faster adoption of other technologies;
b) support for Package Developers to build EDDs targeted for today’s EDD bases system under a single development tool.

IEC 61804-2:2018 specifies FB (function blocks) by using the result of a harmonization work as regards several elements.
a) The device model which defines the components of an IEC 61804-2 conformant device.
b) Conceptual specifications of FBs for measurement, actuation and processing. This includes general rules for the essential features to support control, whilst avoiding details which stop innovation as well as specialization for different industrial sectors.
c) The electronic device description (EDD) technology, which enables the integration of real product details using the tools of the engineering life cycle.
This third edition cancels and replaces the second edition published in 2006 and integrates parts of IEC 61804-1 which was withdrawn in January 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) added command communication mapping in Clause 8;
b) moved and reword compatibility level definition from IEC 62804-1 to new Annex B and terms and definitions;
c) added proxy concept in new Annex C.

IEC 61804-4:2015 specifies EDD interpretation for EDD applications and EDDs to support EDD interoperability. This document is intended to ensure that field device developers use the EDDL constructs consistently and that the EDD applications have the same interpretations of the EDD. It supplements the EDDL specification to promote EDDL application interoperability and improve EDD portability between EDDL applications. This first edition cancels and replaces IEC TR 61804-4 published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- New paragraph: EDDL data description;
- EDDL METHOD programming and usage of builtins;
- Edit session;
- Offline and online configuration;
- EDDL communication description and Enhancements in paragraph EDDL user interface descriptions.

IEC 61804-5:2015 specifies the EDDL Builtin library and provides the profiles of the various fieldbuses.

IEC 61804-3:2015 specifies the Electronic Device Description Language (EDDL) technology, which enables the integration of real product details using the tools of the engineering life cycle. It specifies EDDL as a generic language for describing the properties of automation system components. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Builtins and their profiles removed and relocated into IEC 61804-5. The following extensions are integrated in the EDDL specification to meet FDI requirements:
- new contructs BLOB, PLUGIN;
- component construct for communication server requirements (additional attributes);
- extension of the class attribute;
- new attributes PRIVATE, VISIBILITY, WRITE_MODE.

IEC 62769-3:2015 specifies the FDI Server. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

IEC 62769-5:2015 defines the FDI Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore it represents the devices of the automation system as well as the connecting communication networks including their properties, relationships, and the operations that can be performed on them.

IEC 62769-101-1:2015 specifies an FDI profile of IEC 62769 for IEC 61784-1_CP 1/1 (FOUNDATION Fieldbus H1).

IEC 62769-101-2:2015 specifies an FDI profile of IEC 62769 for IEC 61784-1, CP 1/2 (FOUNDATION Fieldbus HSE).

IEC 62769-1:2015 describes the concepts and overview of the Field Device Integration (FDI) specifications. The detailed motivation for the creation of this technology is also described. It helps to understand the other parts of this multi-part standard.

IEC 62769-6:2015 specifies the technology mapping for the concepts described in the Field Device Integration (FDI) standard. The technology mapping focuses on implementation regarding the components FDI Client and User Interface Plug-in (UIP) that are specific only to the workstation platform as defined in IEC 62769-4:2015, Annex E.

IEC 62769-7:2015 specifies the elements implementing communication capabilities called Communication Devices.

IEC 62769-4:2015 specifies the FDI Packages. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

IEC 62769-2:2015 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.